Changshu City in the Experimental Factory
Balancing machine may or vibration generated during rotation of the rotor acting on the bearing vibration force is reduced to within the permissible range, the vibration is reduced to improve performance and increase the quality of the essential equipment. So what methods do when balancing machine during the correction? The following small series to introduce the next.
1, the weight component method
for mounting the counterweight convenience, can by drilling a number of holes uniformly distributed in the rotor to be balanced, and may be applied to the two screw holes adjacent to the light little mass, respectively, and correction feature weight. If the vector satisfies the following relationship, it is likewise possible to achieve dynamic balance of the rotor.
2, de-duplication method
provided already estimated radius of the rotor unbalance amount and unbalance the original phase angle, this point is the "key", we have the same phase, de-weight the radius by a method such as drilling or milling operation, removal of mass, if the weight vector SEMIDIAMETER satisfied: the rotor is balanced. This is the re-balancing algorithm to law.
3, the additional disk balancing method
for its frequent need for correcting unbalance of a rotor, such as a grinding wheel rotor, before equilibrium is recommended to install a balance on the rotor disk. Machined on the balance plate trapezoidal groove, for the introduction of additional weights, in a uniform outer end portion of one week the scale disc.
When the above method is about balancing machine during the correction, we hope to help to you. If you can contact us for questions if there are other balancing machine at any time!