Experimental environment Introduction:
52LAB self-designed experimental operating environment and test requirements, facilitate learning and learner systematic experimental operation CCNP, improve learning efficiency, reduce learning costs.
Experimental requirements:
1, according to the experimental topology configuration information for each router host name, IP address and routing protocol;
2, is provided area1 as an NSSA, NSSA area AREA4 is the Totally, fully distal area Area2, Area3 of distal region;
loopback network 3,52LAB-7 summarizes the operation of the network;
4, provided area2 authentication area, 52LAB-1 and the enable link 52LAB-3 MD5 authentication;
5, Area4 backbone area0 disposed bis virtual link;
6,52LAB-4 is filtered 10.10.XX route entry;
7,52LAB-4 52LAB-7 to a network, and to ensure the OSPF protocol to maintain communication when a fault occurs;
three loopback network interface 8,52LAB-5 is not added in the OSPF protocol, but other devices capable of communicating routers three address;
9, test: test the configuration above test.
Environment Download: Download Learning Page
Experimental environment to deploy or have any questions can consult the additive group: 563,732,595