3.1 Simplicity Studio Installation and Configuration
Simplicity Studio is a free Eclipse-based integrated development environment (IDE), value-added tools provided by Silicon Laboratories collection. Its main goal is to reduce development time, so you can focus on your application, rather than research Bluetooth, ZigBee specification and hardware reference manual.
Simplicity Studio simplifies the IoT (Internet of Things) development process, you can use everything you need Eclipse4.5-based integrated development environment (IDE) one-click access to developers to complete the project. Simplicity Studio including the energy used in the analysis, a rigorous set of tools to configure and wireless network analysis, and presentation software examples, complete documentation, technical support and community forums. These integrated tools and features work together at all levels of the other IoT developers can easily and efficiently engage in embedded development. Simplicity Studio provides an 8-bit or 32-bit MCU or SoC wireless built-in intelligence to automatically detect the connected graphically configure the device, and show support for configuration options that enable developers to carry out the project in a few minutes.
3.1.1 necessary preparations
Installation file
Installation Simplicity Studio you first need to download the installation file.
64-bit windows version download:
https://www.silabs.com/documents/login/software/installstudio-v4_x64.exe
32-bit windows version download:
https://www.silabs.com/documents/login/software/installstudio-v4.exe
account number
Using the core subjects of ZigBee3.0 protocol stack and SDK, you need to register an account to download the core subjects. Silicon account registration address:
https://siliconlabs.force.com/apex/SL_CommunitiesSelfReg?form=short
3.1.2 emulator driver installation
Because Tiancheng ZigBee development kit using JLink procedural simulation debugging and downloading, so the need to install JLink drive.
JLink driver installation using the default installation. After installation, enable the computer device management, the right as shown in FIG.
3.1.3Simplicity Studio Installation
Click Simplicity Studio installation file 
to start the installation.
Accept user agreement, click on "Next", shown below.
Set the installation path, click on "Next", as shown in FIG.
Note: It is recommended to install in the root directory of the disk, do not place in the Chinese path.
Note: Leave enough hard disk space (10G).
Click "Install" to begin the installation.
Patiently wait a few minutes, waiting for the completion of the installation. Complete installation, which will automatically open, as shown in FIG.
If you do not use the account to log in, download the SDK will not be needed. See the description of the registered account on the festival.
3.1.4 Hardware preparation
The data line 20P JLink simulator properly placed on the liquid crystal plate ZigBee Development Kit, ZigBee module and a sensor module of any properly placed on the liquid crystal plate. The emulator and a computer connected by the USB cable.
3.1.5ZigBee SDK and Tools Download
According to the introduction of section 3.1.4, the hardware is ready, using the account to log on .
After a successful login, Simplicity Studio automatically detect and update information of software and hardware, as shown in FIG. After completion of the detection information, as shown in FIG.
With "Yes" to the next step, as shown below.
This SDK can be downloaded through our classified by device (ie chip models) and product groups (ie, technology).
ZigBee chip development kits using EFR32MG1B132F256GM48, the use of technology is ZigBee3.0.
We downloaded the SDK based on the use of "Install by Product Group".
Click Install by Product Group, as shown below.
In the "ZigBee" tick prior to, click "Next" the next step, as shown in FIG.
Click on "Next" the next step, as shown in FIG.
Click on "Next" the next step, as shown in FIG.
Here you can read using the SDK agreement, click "Accept" below agree to the agreement, all have the same time before they can enter the next step, as shown below.
After agreeing user agreement, click "Finish" started to download and install SDK.
Download the SDK will need more time, please be patient, but in the meantime please ensure that your network open.
After completion of the downloading SDK, shown below.
After completing the SDK download and install, restart the Simplicity Studio, click "Yes" to restart the Simplicity Studio.
Restart Simplicity Studio, there will be a guide to use, as shown above, click on "Exit tour" to exit the guide, click on the "Take the Tour" into the boot.
During the boot process, you can click "Exit tour" to exit using the boot.
So far Simplicity Studio SDK and the installation is complete, the software development platform to build complete.
3.1.6Simplicity Studio main interface presentation
Simplicity Studio after the installation is complete, we need to look at all the major Simplicity Studio button in the main interface and each functional area, let's introduce the common main user interface.
The figure below shows the main Settings button.
Figure above from left to right are:
① account login and exit the user to view information and so on.
②Simplicity Studio settings.
③SDK download and management.
④Simplicity Studio tool selection.
Interface switching button, as shown below, the area of the button main switching different interfaces.
① quickly select a different interface.
② quickly switch to the main screen.
③ quickly switch to Simplicity IDE interface.
The area shown in FIG connection settings for the hardware area, click on the " 
" into the hardware (emulator) is connected is provided, as shown in FIG.
