1, the following requirements to physical host
Memory: 8GB +, recommended 16GB;
Disk: 50GB +;
Physical machine OS: ubuntu-desktop-amd64 14.04 (recommended) or bit windows64
Physical machine to install the software: Install virtualBox4.3.36 and above and the corresponding expansion pack (recommended
4.3.36for ubuntu, 5.0.20for windows). IVT That system needs to support virtualization.
2, how to view IVT
Boot into the system board, Advance-> Intel Virtualization Tech-> to enable
3, the network environment
3.1, Vmware network settings:
3.2, cloud physical network planning:
| Name card |
IP addresses |
description |
| adapter2 |
10.20.0.1/24 |
PXE network |
| adapter3 |
192.168.10.1/24 |
Network Management |
| adapter4 |
192.168.20.1/24 |
Storage Networking |
| adapter5 |
192.168.30.1/24 |
Private network |
| adapter6 |
172.168.0.1/24 |
External network |
SSH + PXE network: for connection to a controller node, compute node through the SSH server manages the physical operation;
The external network: Controller Each node requires one external IP address, the network is also an external network to access a virtual machine (e.g.: float Network)
Network management: network management OpenStack api network;
Storage Networking: machine access network ceph
Private Network: Tenant Network (vm network)
Second, install fuel
1, fuel Download:
Note: The size of the installation fule system requires a minimum of 50GB of disk
2, start the fuel-master virtual machine
(If you use a type vmware virtual machine to create a disk is IDE, it will be installed when fuel error), see the following screen, select the first item, if you want to change the PXE network information such as IP address and subnet mask, press the tab keys to change, press enter to install changes have been made; the recommended default IP address and subnet mask, enter here directly for installation.
The installation process without human intervention, can have been waiting for installation Note: During the installation master is strongly recommended to use the default configuration, do not change any configuration, in order to avoid installation problems.
3, about 10 minutes into the setup screen, as
4, fuel card configuration
5, is provided to allow the segment ssh
6, set the PXE address pool
7, Configuring DNS
8, select Bootstrap Image as Skip building bootstrap image, otherwise it will error
9, set ntp server address, usually choose their own node fuelmaster
10 , save and exit
Note: If the above setting screen does not appear during the installation fuelmenu input command to enter configuration.
Select the configuration
Quit setup > Save and Quit
Continue to wait for about half an hour can be prompted to install ok
Accessed through a browser: https://10.20.0.2:8443 (user name and password are both admin)