Step 1: Install Anaconda
Early installation is TensorFlow, pre-installation tool is used by Anaconda. The overall feeling is: This tool is very easy to use! Therefore, detailed installation Anaconda step is omitted, this is not cumbersome.
Step 2: Install MXNet
The cause is to get a Master Li Mu involved in the preparation of "hands-on learning deep learning" from the network and update the time was in April 2019, rare. Thus, according to the book source code debugging requirements, want to install MXNet framework, a comprehensive study about the content.
So, naturally think of using the Anaconda installation MXNet. After the installation is now complete, summarize the point of view - the installation went very smoothly; comparison with other records on the network installation point of view, more concise preferable. Now described as follows:
Step 1: Open a command line, run the command conda create -n mxnet
Get the following tips:
Collecting package metadata: done
Solving environment: done
## Package Plan ##
environment location: /Users/zxzpc/anaconda3/envs/mxnet
Proceed ([y]/n)? yPress Enter to continue the operation down. The following tips are as follows:
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use
#
# $ conda activate mxnet
#
# To deactivate an active environment, use
#
# $ conda deactivateStep 2: Activate mxnet environment
According to the above prompt, run the following command:
conda activate mxnetFormal installation MXNet
Command is as follows:
conda install mxnetThe following tips are as follows:
Collecting package metadata: done
Solving environment: done
## Package Plan ##
environment location: ............./anaconda3/envs/mxnet
added / updated specs:
- mxnet
The following packages will be downloaded:
package | build
---------------------------|-----------------
certifi-2019.6.16 | py36_0 154 KB
mkl-2019.4 | 233 155.2 MB
numpy-1.14.2 | py36ha9ae307_0 3.9 MB
------------------------------------------------------------
Total: 159.2 MB
The following NEW packages will be INSTALLED:
_mutex_mxnet pkgs/main/osx-64::_mutex_mxnet-0.0.40-mkl
asn1crypto pkgs/main/osx-64::asn1crypto-0.24.0-py36_0
blas pkgs/main/osx-64::blas-1.0-mkl
bzip2 pkgs/main/osx-64::bzip2-1.0.6-h1de35cc_5
ca-certificates pkgs/main/osx-64::ca-certificates-2019.5.15-0
cairo pkgs/main/osx-64::cairo-1.14.12-hc4e6be7_4
certifi pkgs/main/osx-64::certifi-2019.6.16-py36_0
cffi pkgs/main/osx-64::cffi-1.12.3-py36hb5b8e2f_0
chardet pkgs/main/osx-64::chardet-3.0.4-py36_1
cryptography pkgs/main/osx-64::cryptography-2.7-py36ha12b0ac_0
ffmpeg pkgs/main/osx-64::ffmpeg-3.4-h8a2ae75_0
fontconfig pkgs/main/osx-64::fontconfig-2.13.0-h5d5b041_1
freetype pkgs/main/osx-64::freetype-2.9.1-hb4e5f40_0
gettext pkgs/main/osx-64::gettext-0.19.8.1-h15daf44_3
glib pkgs/main/osx-64::glib-2.56.2-hd9629dc_0
graphite2 pkgs/main/osx-64::graphite2-1.3.13-h2098e52_0
harfbuzz pkgs/main/osx-64::harfbuzz-1.8.8-hb8d4a28_0
hdf5 pkgs/main/osx-64::hdf5-1.10.2-hfa1e0ec_1
icu pkgs/main/osx-64::icu-58.2-h4b95b61_1
idna pkgs/main/osx-64::idna-2.6-py36h8628d0a_1
intel-openmp pkgs/main/osx-64::intel-openmp-2018.0.3-0
jasper pkgs/main/osx-64::jasper-2.0.14-h636a363_1
jpeg pkgs/main/osx-64::jpeg-9b-he5867d9_2
libcxx pkgs/main/osx-64::libcxx-4.0.1-hcfea43d_1
libcxxabi pkgs/main/osx-64::libcxxabi-4.0.1-hcfea43d_1
libedit pkgs/main/osx-64::libedit-3.1.20181209-hb402a30_0
libffi pkgs/main/osx-64::libffi-3.2.1-h475c297_4
libgfortran pkgs/main/osx-64::libgfortran-3.0.1-h93005f0_2
libiconv pkgs/main/osx-64::libiconv-1.15-hdd342a3_7
libmklml pkgs/main/osx-64::libmklml-2018.0.3-0
libmxnet pkgs/main/osx-64::libmxnet-1.2.1-mkl_hbefbd7c_1
libopencv pkgs/main/osx-64::libopencv-3.4.1-h14a57ad_3
libopus pkgs/main/osx-64::libopus-1.3-h1de35cc_0
libpng pkgs/main/osx-64::libpng-1.6.37-ha441bb4_0
libprotobuf pkgs/main/osx-64::libprotobuf-3.5.2-h2cd40f5_0
libtiff pkgs/main/osx-64::libtiff-4.0.10-hcb84e12_2
libvpx pkgs/main/osx-64::libvpx-1.7.0-h378b8a2_0
libxml2 pkgs/main/osx-64::libxml2-2.9.9-hab757c2_0
mkl pkgs/main/osx-64::mkl-2019.4-233
mkl-dnn pkgs/main/osx-64::mkl-dnn-0.14-h04f5b5a_0
mxnet pkgs/main/osx-64::mxnet-1.2.1-h8cc8929_0
ncurses pkgs/main/osx-64::ncurses-6.1-h0a44026_1
numpy pkgs/main/osx-64::numpy-1.14.2-py36ha9ae307_0
openssl pkgs/main/osx-64::openssl-1.1.1c-h1de35cc_1
pcre pkgs/main/osx-64::pcre-8.43-h0a44026_0
pip pkgs/main/osx-64::pip-19.1.1-py36_0
pixman pkgs/main/osx-64::pixman-0.38.0-h1de35cc_0
py-mxnet pkgs/main/osx-64::py-mxnet-1.2.1-py36h4bd7469_0
pycparser pkgs/main/osx-64::pycparser-2.19-py36_0
pyopenssl pkgs/main/osx-64::pyopenssl-19.0.0-py36_0
pysocks pkgs/main/osx-64::pysocks-1.7.0-py36_0
python pkgs/main/osx-64::python-3.6.8-haf84260_0
readline pkgs/main/osx-64::readline-7.0-h1de35cc_5
requests pkgs/main/osx-64::requests-2.18.4-py36h4516966_1
setuptools pkgs/main/osx-64::setuptools-41.0.1-py36_0
six pkgs/main/osx-64::six-1.12.0-py36_0
sqlite pkgs/main/osx-64::sqlite-3.28.0-ha441bb4_0
tk pkgs/main/osx-64::tk-8.6.8-ha441bb4_0
urllib3 pkgs/main/osx-64::urllib3-1.22-py36h68b9469_0
wheel pkgs/main/osx-64::wheel-0.33.4-py36_0
xz pkgs/main/osx-64::xz-5.2.4-h1de35cc_4
zlib pkgs/main/osx-64::zlib-1.2.11-h1de35cc_3
zstd pkgs/main/osx-64::zstd-1.3.7-h5bba6e5_0
Proceed ([y]/n)?
Downloading and Extracting Packages
numpy-1.14.2 | 3.9 MB | ##################################### | 100%
certifi-2019.6.16 | 154 KB | ##################################### | 100%
mkl-2019.4 | 155.2 MB | ##################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: doneAt this point, MXNet end of the installation.
The third step: Use MXNet in PyCharm
This configuration requires only one step to open PyCharm-> Preferences, operation as shown below:
