Two 500 meters, the cable has exceeded the maximum range can be transmitted (the cable within the limits of 100 meters), a relay can be used in high-power wireless bridge manner, an optical fiber connector may be used to solve optical transceiver this problem.
First, the use of high-power wireless bridge
Materials need to be prepared: one pair of high-power pole bridge, installation of bridge;
Outdoor power bridge, using a high-gain directional antenna, a wider range of radiation, according to the magnitude of power can be achieved than 5 km coverage;
2, in order to avoid radio interference, most of the wireless bridge connection using 5G band, less interference, higher access rate, low latency, speed stability, to meet transmission requirements of the video monitor; two bridges They are connected to both ends of the apparatus to realize signal transmission network, the connection mode as shown in FIG.
Second, the use of optical fiber transmission
Materials need to be prepared: a pair of single-core optical transceivers, fiber sheath 500 meters;
Use outdoor leather fiber, this fiber is very suitable for outdoor environment, not affected by the external environment, to achieve long-distance transmission network signal, the price is much cheaper than twisted pair, but the welding cost is relatively high, it can reduce the use of cold joints part of the cost;
An optical transceiver connected to the home network and monitoring devices, the use of optical signal transmission network, to achieve networking.
WiFi wireless signals over long distances, according to the needs of the user environment, the use of suitable means, may be used an optical fiber networking bridge wireless networking may also be used. Optical fiber transmission wireless bridge mode with respect to some stability, if only transmission control signal, both to meet the demand.
Reproduced in: https: //www.jianshu.com/p/824cf35f39ad