A plurality of VRRP group VLAN

1. According to the networking requirements, starting four switches, three PC.

2. Configure SwitchA.

3. Configure VLAN2.

4. Create a backup group 1 and configure virtual IP address of the backup group 1 is 10.1.1.100.

5. Set SwitchA backup group 1 priority 110, 100 is higher than the priority of SwitchB.

6. Configure VLAN3.

7. Create backup group 2, and configure the virtual IP address of the backup group 2 is 10.1.1.200.

8. Configure SwitchB.

9. Configure SwitchC.

10. The configuration SwitchD.

11. Review the configuration of the display vrrp verbose on SwitchA.

12. Review the configuration of the display vrrp verbose on SwitchB.