Router wireless bridging steps
First of all, you must have two routers. The two routers are called the main router and the secondary router. The main router is connected to the network first, and the secondary router is used to bridge the WiFi signal of the main router.
1. Set up the main router
1. Set up the main router and connect to the network normally. Under normal circumstances, the main router can already access the Internet normally, so here and before, there is no need to set up the main router.
We only need to know the WiFi name and password of the main router. Assume that the WiFi name of the main router is "O2.4gkb29b" and the WiFi password is 12345678
2. Set up the secondary router
1. First enter the setting interface of the secondary router. Use a computer to connect to the WiFi of the secondary router (of course, you can also use a traditional network cable to connect to the computer, as long as it can be connected).
2. Open any browser on your computer/mobile phone and log in to the secondary router (the weak current user uses tp-link as the secondary router as an example. The default address for general login is 192.168.1.1).
3. After entering the secondary router, then click [Application Management] - [Wireless Bridging]
can be seen,