Inovance Pulse Servo SV630P Common Parameter Setting (Botu PLC Pulse Output Control)

For a detailed introduction of the Portal PLC pulse output control function block, please check the blog link below:

Portal 1200PLC axis control function block (pulse axis)_Botu axis control block_RXXW_Dor's blog-CSDN blog STRUCT// axis enable// axis forward jog// axis reverse jog// axis back to original/ /Axis reset//Axis Pause//Axis Quick Stop//Axis Absolute Positioning//Axis Relative Positioning//Axis Running at a Constant Speed//Modify Axis Parameters//Axis Parameter Modification Done//Axis Homing Mode//Axis Acceleration// Axis deceleration//Axis acceleration time/S//Axis deceleration time/S//Axis emergency stop time/S//Axis acceleration smoothing time//Axis jog speed//Axis zero offset//Axis absolute positioning position/ /Axis absolute positioning speed//Axis relative positioning position//Axis relative positioning speed//Axis constant speed. _Botu axis control block https://rxxw-control.blog.csdn.net/article/details/127920634 Inovance bus servo application please check the following article link:

10 axis bus control