Introduction of the main characteristic parameters of the product:
Material number: SCT2432, SCT2432Q
P2P for vehicle and industrial specifications, can replace LMR14030 with P2P at the same time,
have experience in large-scale mass production of vehicle pre-installation
AEC-Q100 qualified, the results are as follows:
-1 Class Device Temperature: -40°C to 125°C
Ambient Operating Temperature Range
- Device HBM ESD Class H1C
- Device CDM ESD Classification Class C3B
Wide Input Range: 3.8V-40V
Up to 3.5A Continuous Output Current
0.8V±1 % Feedback Reference Voltage
Combined 85mΩ High Side and 55mΩ Low Side Power MOSFETs
Pulse Skipping Mode (PSM) with 25uA Quiescent Current in Sleep Mode
Minimum Turn-on Time 100ns
Adjustable Soft-Start Time
Adjustable Frequency from 300KHz to 2.2MHz
External Clock Synchronization
Frequency Spread Spectrum (FSS) Modulation for EMI Reduction
Programmable Input Voltage Undervoltage Lockout (UVLO) Threshold and Accurate Enable Threshold for Hysteresis
Low Decay Mode Operation
Derived Inverting Voltage Regulator
Over-voltage and over-temperature protection
ESOP-8 package provides
domestic production, short delivery time, guaranteed supply, and has a very good cost reduction advantage.
For more information:
www.me-top.com
