1. Reference preparation
Firstly, the references are numbered in the paragraph setting model, and the "references" are numbered and cited through "cross-reference", and multiple consecutive references are realized in the "[xy]" citation format. This method is illustrated by taking the implementation of [1-3] cross-reference format to cite [1][2][3]
three consecutive references as an example.
2. Reference serial number [1-3] setting
2.1 Left section setting
- Insert numbers [1] and [3] by cross-reference (if you change to other array numbers, the same applies);
- Operate the number [1] at this position: click the right mouse button and select "Switch field code";
the result is as shown in the figure:
- field code replacement
Replace [1] in field codes * MERGEFORMAT
with #"[0"
:
# 替换后的域代码:
{
REF _Ref444874348 \r \h \#"[0"}
- Select the domain code and click Update Domain to get:
The result obtained:
2.2 Right interval setting
- Select [3] after the reference, switch the field code, and get the following results
- Replace [3] in field codes
* MERGEFORMAT
with#"0]"
:
# 替换后的域代码:
{
REF _Ref444874348 \r \h \#"[0"}
-
Select the domain code and click Update Domain to get:
-
Add a horizontal line "-" between 1 and 3 in [13], and finally get "[1-3]"