rk356x-Android flashing
Rockchip flashing process, enter the pre-flashing state, load flashing firmware, flashing. When flashing for the first time, please pay attention to whether to install the driver. If not, please install the driver first, referring to 1.1. After the driver is installed normally, the device can be recognized normally. Generally, it will prompt "found an ADB device" or "found a MSC device" under the flashing software. Then enter the pre-flashing state, please refer to 1.3 or 1.4. Then load the flash firmware and choose to flash the whole package (refer to 2.1) or partition image (refer to 3) according to the situation. After the flashing is completed, it can be started normally. If it is still in the loader mode, you need to consult the relevant engineer.
