Flash Tutorial
1. Run the flash tool – select the file button in the upper left corner – select import burning package
2. Select the file you downloaded with the suffix .img, and wait for it to load
3. After the burning package is loaded, note: two checks must be removed: erase falsh and erase bootloader;
4. Click the start button to flash
5. Plug the box and the computer into the USB double male cable, plug in the power cord to power on the box, and automatically start installing the driver.
Open the device manager. If it is not recognized, it needs to be shorted.
6. The driver installation is complete
If the box does not stop in the burning mode during the driver installation process, but continues to start normally,
please remove all connections from the box and perform step 7 again, no need to install the driver again
7. Under normal circumstances, the device driver will automatically start burning
8. The burning process usually takes a few minutes
When the progress bar reaches 100%, it means that the flashing is complete. At this time, unplug the data cable and the flashing is complete!
Firmware download link:
https://pan.baidu.com/s/1rs06ORFT0pBiWONYNmQ9wg Extraction code: uet3
Link: https://share.weiyun.com/3WKuxoBw Password: f9xg4f
Disclaimer: This Android firmware is for internal testing and technical exchange only Use, any legal disputes caused by illegal commercial use and commercial conflicts of interest have nothing to do with me, and I am not responsible for it. Please delete it within 24 hours after downloading. Thank you for your cooperation! Flashing is both fun and risky, please choose carefully, all consequences caused by flashing are at your own risk, and I will not be responsible for it!