The use of the iPhone is relatively smooth, but it is inevitable that the iPhone cannot be turned on due to insufficient memory. Many friends initially did not believe that the iPhone cannot be turned on due to insufficient memory, but if unfortunately encountered this problem, how to solve it? Next, I will share the solution to this problem.
First of all, let’s understand why the iPhone crashes due to insufficient memory and cannot be turned on? The common reasons are as follows:
1. The system is running too much and cannot bear the load
2. Phone memory is too small
3. Too many photos and cache files
So, how to solve iPhone crash due to insufficient memory, you can refer to the following three methods:
Method 1: Forced power-on method of iPhone mobile phone key
1. For iPhone8 and above, the method of forced power-on is:
Step 1: Press Volume + and release
Step 2: Press the volume again - then release
Step 3: Press the power off button again
2. For iPhone7 and iPhone7plus, the way to force it to turn on is to press and hold the volume- and power-off buttons.
3. The general forced power-on method for iPhones before iPhone7 is to press and hold the home button and the shutdown button at the same time.
This method can directly use the key function of the mobile phone to help the mobile phone to be forced to start, without additional preparations, and the operation is very simple and convenient.
Method 2: iTunes recovery mode, remove iPhone from dead state
Step 1: Download the iTunes software on your computer.
Step 2: Connect the computer and iPhone with a data cable.
Step 3: Press and hold the power off button on the iPhone for 3 seconds, and the Apple logo will appear. Press and hold the home button and the power off button at the same time, and press for 10 seconds. At this time, the screen of the phone is black. Then release the power button, and press the home button with your finger for 30 seconds, until the iTunes software on the computer shows that an iPhone in recovery mode is detected.
Step 4: Click OK, and then release the home button to enter the recovery mode. After the recovery is complete, it can be turned on.
This method is also a conventional method, which can help to remove the dead state of the iPhone through the system software of the iPhone.
Method 3: Use Niu Xuechang iPhone repair tool to repair iPhone
Step 1: Download and open Xuechang Niu’s iPhone repair tool , connect your iPhone to the computer with a USB data cable, and click “Start”.
Step 2: Select the repair mode, choose "Standard Repair" first, and the device data will not be lost.
Step 3: Click "Download Firmware", and start repairing after the download is successful. The whole repair process takes about 10 minutes, be careful not to disconnect the data cable, just wait for the display "repair complete".
If the computer still cannot be turned on after being repaired in the standard mode, you can follow the interface prompts to select the advanced mode to repair. It should be noted that after using advanced mode, all data on your device will be erased.
The above are the three methods to solve the problem of insufficient memory, crash, and failure to turn on the iPhone. I hope it can help everyone to turn on the iPhone smoothly.