Civil 3D 2023 brief introduction
yuque.com/u32369119/ucgl7v/fch25g
aygsx3xou0.feishu.cn/docx/CAYgdTjOioDq5YxlRmJcwrOknOg
Civil3D design software is the software of choice for civil engineers and a comprehensive solution for civil public areas. At the same time, Civil3D provides the functions of AutoCAD and AutoCAD Map3D. The software uses a model-based environment to make better design decisions and improve project quality. It simplifies documentation through design-oriented planning and production methods, and uses the power of BIM (Building Information Modeling) to achieve better design coordination and project collaboration.
1. Civil 3D 2023 system requirements
Operating System: Microsoft® Windows® 10 (64-bit only) (version 1803 or later)
CPU: Minimum: 2.5–2.9 GHz or faster processor / Recommended: 3+ GHz or faster processor
RAM: 16 GB or higher
Displays: Traditional Displays: 1920 x 1080 True Color, High Resolution and 4K Displays: Supports resolutions up to 3840 x 2160 on Windows 10, 64-bit (powerful graphics card required)
Graphics Card Minimum: 1 GB GPU, 29 GB/s Bandwidth and DirectX 11 Compatible, Recommended: 4 GB GPU, 106 GB/s Bandwidth and DirectX 11 Compatible
Storage space: 16 GB
2. Installation process
1. Disable UAC, and exit all anti-virus software, and the anti-virus software that comes with the system (WIN10 shutdown steps: double-click the "This Computer" icon on the desktop, and then click "Settings-Update and Security-Windows Security Center-Virus and Threat Protection-Management Settings-Real-time Protection-Off"), otherwise the activation tool will be killed by mistake, resulting in the inability to use the activation tool.
(1) Disable UAC and operate as shown in the figure below: Click the right mouse button on the start button icon in the lower left corner of the desktop, click "Search"
(2) Enter UAC in the search bar at the bottom, and then the "Change User Account Control Settings" option appears on the top, click this option with the left mouse button.
(3) Push the slider to the bottom, as shown in the figure below, and then click "OK"
2. Select the downloaded "Civil3D 2023" file and decompress it: click the right mouse button and select "Decompress File"
3. Double-click to enter the unzipped folder
4. Select the "Autodesk_Civil_3D_2023_Chinese_Simplified_Win_64bit_dlm_001_002.sfx" file, click the right mouse button and select "Run as Administrator"
5. The default is fine, select "OK"
6. The following prompt appears as shown in the figure, just click "Restart"
7. Check "I agree to the terms of use" and click "Next"
8. You can change the installation location. The default installation is on the C drive. After selecting, click "Next"
9. Click "Install"
10. Installing
11. Click "Finish", and then do not run the "Civil 3D 2023" program
12. The following is the key activation process. There are two activation tools, which one can be used. The following demonstrates them separately.
A. Activate the process with the first tool:
(1) Double-click to enter the "Autodesk Activation Tool" folder, "Autodesk Activation Tool_1" folder
(2) Double-click "Autodesk Activation Tool"
(3) The following window appears, select "Civil 3D 2023", click "Install", and wait for a while to complete.
(4) Go back to the desktop and double-click the "Civil 3D 2023 - Simplified Chinese Metric (Simplified Chinese Metric)" icon to start the Civil 3D 2023 program
(5) If the following window appears, select the Use network permission column, click "Select" and continue to step (6). If the following window does not appear, but directly enters the working window, congratulations, you have successfully activated and can use it normally!
(6) Select "Single License Server". "Server Name" fill in 127.0.0.1 or localhost or [email protected]
(7) Click "OK"
(8) It has been activated successfully and can be used normally.
B. Activate the process with the second tool:
(1) Double-click to enter the "Autodesk Activation Tool" folder, the "Autodesk Activation Tool_2" folder, and the "Autodesk License Patcher" folder.
(2) Select "Autodesk License Patcher", right-click on this file, and select "Run as Administrator"
(3) Wait for the program to finish running, please do not close this window during this period, the program will automatically close the window after completion.
(4) The following operation steps are the same as the operation steps (4) to (8) in " A. Using the first tool to activate the process: ".