On June 30, at the MWC 2023 Shanghai 5G Future Summit, MeiG Smart released the cost-effective and lightweight 5G RedCap (also known as NR-Light) CPE solution SRT835 . The solution is equipped with the Snapdragon® X35 modem and RF system and the WCN6856 high-speed Wi-Fi 6 solution. By simplifying the system architecture, it achieves lower cost, fewer antennas, and smaller size, and meets the needs of operators for lightweight, wide coverage, and The demand for strong signal and low cost accelerates the development of 5G FWA industry.
With the acceleration of 5G commercial scale construction, for medium and high-speed scene products in the Internet of Things, 5G terminal products are facing problems such as high cost, high power consumption, and complex design. These problems are becoming more and more prominent. Scaling brings challenges.
At this time, 5G RedCap came into being. It solves the cost problem of 5G applications by simplifying the number of terminal antennas, transmitting and receiving bandwidth, and reducing the modulation order, and promotes the deep integration of 5G into the wave of digital transformation.
MeiG Smart 5G RedCap CPE solution SRT835 is based on Snapdragon® X35 5G modem and RF system design. The solution supports 5G NR Sub-6GHz and complies with 3GPP Release 17 standards and protocols. In the Sub-6GHz frequency band, the maximum bandwidth can reach 20MHz, and the maximum rate can reach 220Mbps, with better data transmission capabilities. In addition, it also supports independent networking (SA), and is compatible with multiple 4G network standards, and can be applied to mainstream operator networks around the world.
The solution integrates a Qualcomm Wi-Fi 6 chip , supports 2.4G/5G dual-band, and can support multiple user access at the same time. This greatly improves the throughput and efficiency of the network, makes data transmission faster, meets the needs of users for high, medium and low speeds, and makes the vision of users enjoying high-speed network connections a reality.
In terms of application scenarios, the 5G RedCap CPE solution SRT835 can be widely used in live video broadcasting, corporate offices, home Internet access, student dormitories, shops, rural farms and other scenarios. It can meet the needs of "on-the-go, use, go" and provide customized network requirements for vertical industries, allowing industry customers to access 5G networks more flexibly, high-speed, and reliably, and enjoy the ultimate 5G FWA experience.
At present, this solution has been commercialized in small batches at home and abroad, and has played an important role in helping customers' terminal equipment to land, improving the deployment capability of the whole machine, and helping 5G FWA customers to commercialize successfully.
MeiG Smart has released a variety of 5G/4G FWA (5G/4G CPE, 5G/4G MiFi, 5G/4G ODU/IDU, 5G BOX, 5G/4G Dongle and routers, etc.) smart terminal industry solutions. By deploying 5G base stations near users, the 5G antenna transmits beams to connect to 5G CPE terminal equipment in users' homes, converting 5G network signals into WiFi and other network connections, bringing users an experience that is equivalent to or even surpasses optical fiber.
In the new era of intelligent connection of all things, with the rapid growth of the demand for the Internet of Things, smart home and entertainment games, the demand for high-speed and stable network connections will be even greater, and the ubiquitous 10G network will become the future trend. Globally, FWA has become the best cost-effective solution for the "last mile" of network access. As the world's leading provider of wireless communication modules and solutions, MeiG Smart will continue to empower the industry, launch higher-quality, more cost-effective 5G FWA solutions, help 5G flourish and develop, and create a better intelligence for people world.