U disk installation system (win10 as an example)

Download the MicroPE Toolbox

Enter the official website to download MicroPE Toolbox- Download

After installation, open the micro PE toolbox client, choose to install PE to the U disk

PE wallpaper can choose the wallpaper you like, check it to include DOS toolbox, personalized drive letter icon

Download the original system

Enter the website to download the mirror NEXT, ITELLYOU

If you don't have an account, just register

Enter to choose to start using

select win10

Here we choose the consumer version and use Thunder to download the BT seed

The following two drive letters are the drive letters divided into after the PE toolbox is installed in the U disk. Pay attention to the EFI drive letter. You cannot delete or add anything in it. The other drive letter can be used as a normal U disk space. Use, we now need to copy the downloaded scene file to the normal U disk space

At this time, our system U disk is only ready.

install the system

We insert the U disk into the computer, turn it on, and keep pressing the shortcut key of the system startup item to enter the BIOS. Different brands of computers have different shortcut keys for the startup item, some are F11, some are F12

The dell we use here is F12

Here select the UEFI option named after your U disk

We open the partition tool on the desktop

Here are all the hard drives on our computer, where we can reformat and allocate space

Select the drive letter to be operated, and click Quick Partition

Select the number of partitions here, change the type of partition to GUID, and choose to align the partition to an integer multiple of the number of sectors as 4096

Select Yes, confirm formatting and partitioning

Here we are opening the window installer on the desktop

Choose to install the image file in our U disk, select the win10 version, and click Install

After the installation is completed, restart the computer and the system reinstallation is complete

system settings

After booting, we need to do some settings

Choose here for personal

Select offline account here

Choose from limited experiences

Enter the name, click Next, the password can not be entered, directly to the next step

All toggle buttons are off, then click Accept

Setup is complete!!!Installation complete!!!

FAQ: Disable Dell Laptop Battery Warning in Bios! Self-test power adapter settings

The error picture, according to the translation, means this, because the power adapter has a problem and cannot pass the test.

Original: Warning Message

Alert! TheAC poweradapter wattage and type cannot be determined. The batterymay not charge.The system will adjust the performance to match the poweravailable.

Note: This warning can be disabled in BIOS setup.

Translation: warning message

Be alert! Unable to determine the wattage and type of AC power adapter. The battery may not charge. The system will adjust performance to match available power.

NOTE: This warning can be disabled in the installer.

Solution: From the translation of the last sentence above, it can be seen that this warning can be disabled. So proceed to close this warning

1. Start normally and then start to the warning page, click the blos button (or press F2 to enter directly)

2. Select POST behavior and click Adapter Wamings.

3. Cancel the check in front of Enable Adapter Wamings, click appiy to save and restart

Note: If it has been canceled before. Or if the warning is still the same after clicking Save, repeat the operation. Check the save and restart first, and then go to cancel the save and restart. Anyway, it is to check the save and restart once, and cancel the save and restart once. This is good, because I have encountered this situation myself, so I want to emphasize it.