1. How to create surface panels in Revit
In our drawing process, we may encounter some surface shapes, and our conventional panels cannot meet our drawing requirements. Today we will learn how to draw surface panels in Revit.
1. Create a new "Adaptive Metric Conventional Model" family, create 4 point primitives and use Adaptive for them.
2. Create 4 more points at the same position (by selecting the pick command, click to select the XOY reference surface, and then place the point to ensure that the direction offset parameter of the Z family is added).
Select the newly created 4 points, and add associated height parameters to their offsets in the "Dimensions" of the property panel, so as to facilitate adjustment during project use.
Adjust the height of each point in the family type, connect the 4 points and the adaptive point with the reference line, use the Ctrl key to select the 4 point source and the four adaptive points, and select to create the entity.
Here, the editor finds the difference between not turning on 3D snapping and turning on 3D snapping when drawing a reference line (only entities created by drawing a reference line and turning on 3D snapping can be parameterized).
Used in the last loaded project.
2. How to create a board with one click in Revit
Use the modeling assistant [civil engineering module] → one-click to form a board
1. Click on the function of [One-key Board Formation]
2. Two modes: ①Batch forming boards; ②Click to form boards.
The values that can be preset are: slab type, structural/building slab, slab height offset.
①Batch forming boards: generate boards according to the closed coils surrounded by structural columns, walls and beams.
Functional operation: Click the [Start Frame Selection] button, select columns, walls, and beams, and then click the [Finish] button in the upper left corner.
②Click to form a board: Generate a board according to the closed coil surrounded by structural columns, walls, and beams.
Functional operation: Click on a closed space surrounded by structural columns, walls, and beams.
The modeling assistant [civil engineering module] also has 181 functions such as turning the axis grid, turning the pile, turning the wall, hardcover raw beams, turning doors and windows, one-key panel formation, fast curtain wall, floor opening, etc.
Modeling assistant address: https://www.zhbim.com/?source=csdn