U disk boot disk production
Before making the boot disk, we need to prepare a USB flash drive above 8G and a computer with Internet access.
1. Download the system image
Download the official image file according to the system version you need, remember to download the pure image, otherwise there will be a bundled phenomenon after the system is installed later. You can go directly to the following website to download, remember to choose the version you want when downloading.
https://msdn.itellyou.cn/
2. Make a U disk boot disk
Here are two softwares for making boot disks, namely Floppy Disk and U Boot. The operation of the boot disks made by these two softwares will be a little different, and they will be explained one by one below.
1. Production of Floppy Disk
Floppy Disk is a paid software, but it can be used for a period of time. The download link is below.
https://cn.ultraiso.net/xiazai.html
Open Floppy, select the downloaded image file
Use Floppy to write the hard disk image
Start writing, the process may be a bit slow, you need to wait a while.
write success
2, U start to make a boot disk
open u start
Start to make a USB boot disk
and the production is complete
3. Run the prepared boot disk
Plug in the USB flash drive to the computer, restart the computer, and enter the BIOS when the computer starts (the key to enter is different for each computer, you can use Baidu) to
set the priority startup item
. After selecting your USB flash drive as the boot disk, start reinstalling the system. There are also some differences in the reinstallation of the boot disk made by Floppy Disk and U Boot.
Floppy Disk Startup Disk:
Directly enter the system installation program, select the system version to install and set it up.
U boot disk
After the BIOS boot disk, it will enter the PE system, and the system will be reinstalled after the PE system completes the system partition.
After partitioning is complete, reboot to enter the system installation process.