NDI HD mini series latest firmware v4.2.0628a and its download and installation -- ScienceImage Full NDI bidirectional codec series

NDI HD mini series latest firmware v4.2.0628a and its download and installation -- Costu Full NDI bidirectional codec series

All ScienceImage NDI devices support the latest NDI 5 functions

Introduction to the main functions of ScienceImage Costu Full NDI bidirectional codec NDI HD mini

ScienceImage has recently released the latest firmware v4.2.0628a for the NDI HD mini series. The download address is:

http://www.science-image.com/download/

This firmware upgrade package mainly optimizes the previous hardware and firmware versions as follows:

1. Optimize Line IN and NDI audio mixing functions, and the web UI can control their functions.
2. NDI coding efficiency and delay optimization and interlaced anti-shake processing.
3. Enhance the compatibility with ATOMOS and CANON recorders, cameras and camera series HDMI sources, and optimize the HDMI handshake mechanism for other brands of monitoring/display devices.
4. The firmware upgrade package is optimized and compressed, and the incorrect upgrade package is automatically screened to prevent misuse by customers.
5. The functions of the web UI interface have been increased and beautified, making it easier to operate.
6. Optimize the output quality of decoded SDI audio.
7. Optimize the NDI decoding selection output function.
8. Optimize the function of PTZ control module.
9. Optimize Mic audio input and embedding function
10. Optimize the de-embedding of external embedded audio and NDI audio
11. NDI codec upgrade to the latest version NDI 5.1.3 function 12. Optimize
time stamp function ; 14. Optimize the network transmission mode RUDP and Single-TCP function 15. Optimize the automatic search and selection of decoding NDI source, intelligent jump function after NDI source interruption and OLED display, decoding memory function. 16. NDI proxy stream format optimization 17. Optimize SDI loop output image quality and decoding volume adjustment

Start firmware upgrade steps:

Observe the OLED display of the NDI HD mini box, enter the IP address in the IE browser (you need to set your PC to the same network segment as the box) and enter the management interface:

Initial username: admin Initial password: admin

After entering the web UI management interface of the NDI HD mini box, click the system menu on the left, and click to open the upgrade page under firmware upgrade

Click to select the file, select the upgrade package in the resources and wait for about 5 seconds. After the FLASH of the firmware upload box is completed, if the upgrade package is correct, the "Start Upgrade" button will turn green (if it is incorrect, it will be red and cannot be clicked, and there will be a prompt on the page ), click the Start Upgrade button to upgrade the firmware, there is a progress bar at the bottom of the page, the upgrade is completed in about one minute, and the box will automatically restart after the upgrade is completed.

At this time, return to the home page of the web UI and check the Dashboard interface to check the upgrade package version. If the firmware version is displayed as 0628, it is the latest version.

Since its release in 2019, NDI HD mini has gained a lot in the radio and television and ProAV industries. It has stable performance and good compatibility. Played a role in the wide application and promotion of new NDI technology...

NDI HD mini family series and its subsidiary functions

The ScienceImage NDI HD family series is divided into 3 models:

1. NDI HDMI mini—Full NDI bidirectional codec including HDMI input/output, encoding supports Full NDI of HDMI 4K30 and below, decoding supports up to 3G-SDI and HDMI 1080p60, codec can be switched at will;
   

2. NDI SDI mini—Full NDI bidirectional codec including 3G-SDI input/output, encoding and decoding supports maximum 3G-SDI input and output, encoding and decoding can be switched at will;
   

3. NDI HD mini—Full NDI bidirectional codec including HDMI and SDI input and output, HDMI and SDI have mutual loop-out and conversion functions (no frequency conversion conversion), NDI encoding supports up to 3G-SDI/HDMI 4K30, NDI decoding supports up to 3G-SDI/HDMI 1080p60;
   

All 3 models support external audio LINE IN embedding and NDI audio de-embedding, HDMI and SDI input priority selection (can support two different signal source input and switch selection), NDI frame rate, frame, bandwidth Adjustable (customers can flexibly adjust NDI bandwidth according to network conditions), volume adjustment, PTZ control, one-key factory reset and other functions (never brick).