Youkeyun manually set the IP address
| name of software | compatible system | download link |
|---|---|---|
| dhcpsrv2.5.2 (Chinese) | Windows | software download |
hardware requirements
PC (Windows system)
network cable (RJ-45)
Wankeyun (normal Wankeyun system)
PC operation
1. Set the PC as a fixed IP
1. Manually set the PC IP
2. Set DHCP
1. Open the main installation program
2. Select the physical network card of the PC
3. Click the next page until you reach the following page, check the overwrite existing file, how to click write INI file
**4, return to the directory after ** is completed Click the program below to run
physical manipulation
Take out the network cable and insert one end of the network cable into the network port of the PC, and the other end into the network port of Wankeyun. At this moment, a prompt box will pop up in the lower right corner. The pop-up prompt box means that the IP has been automatically assigned by Wankeyun. Look carefully at the pop-up window. An IP: xxxxx
Enter the Wanke cloud distribution network
Now that you know the IP, enter the IP you just obtained in the address bar of the browser, and the format is [IP:9999].
Now we can happily set the IP address.