sntpc 2.7 National Time Service Center Tool

sntpc 2.7 is a professional standard authoritative based on the official time service of the National Time Service Center. It can be replaced by non-similar tools. For various application scenarios that require minute-second precision, you can use this tool to synchronize your computer with the standard time!

Special note: This tool can be more accurate than this tool if the time server is not directly set by the system, and it is accurate to milliseconds and is more accurate for scenarios such as spikes!

2.7 update log:

Dual IP settings, if one ntp server IP fails to connect, it will automatically switch to another IP, increasing the stability of the school time;

Compatible with 7 8 8.1 10 system, can save various settings, such as regular time adjustment, etc.; enhanced compatibility with PE system.

Instructions:

1. Click "Measure Time": test the difference between the computer time and the standard time of the NTP server of the National Time Service Center or Metrology Institute

2. Click "Calibration": Synchronize the computer time with the standard time of the NTP server of the National Time Service Center or Metrology Institute.

3. Click "Measure Time" again: test the difference between the corrected computer time and the standard time of the NTP server of the National Time Service Center or Metrology Institute.

If you feel that the accuracy is not enough, you can repeat 1 2 2 3 many times until you achieve a satisfactory effect.

Note: Do not open multiple windows, so as to prevent the windows opened later from being unable to connect to the server due to port occupation.