Linux system U disk installer (Universal USB Installer) V1.9.6.3 latest official version

Universal USB Installer is a tool for burning a Linux ISO to a USB stick.
Wizard-style production of U disk Linux system.
You can choose from a Linux distribution of choice to put on your USB flash drive. The universal USB installer is simple and easy to use. Just choose a Live Linux distribution, ISO file, your flash drive, click Install. Other features include persistence (if available) and the ability to format flash drives for FAT32 (recommended) to ensure a clean install. Once the project is complete, you should have a ready-to-run bootable USB flash drive with the Linux version you choose to install.
How to use Universal USB Installer?
Universal-USB-Installer is a tool used to make a U disk boot disk. The following is an example of making a U disk boot disk for Ubuntu Linux system. The method is as follows:
1. Install the Universal USB Installer software, open it, and click "Browse" Click the button to browse the Ubuntu system ISO image downloaded to the local disk, click "H:\" to select the drive letter of the U disk, and then click the "Create" button.
2. To make a U disk boot disk, you need to format the U disk, click "Yes (Y)", the U disk data will be formatted, and then the Ubuntu system will be burned.
3. The tool starts to burn data to the U disk. The process is relatively long, and you need to wait patiently for about 20 minutes.
4. After step 3 is completed, plug in the U disk and start the computer, and it will enter the Ubuntu system from the U disk (if you cannot enter the U disk boot item, you need to boot into the BIOS to adjust the boot sequence, and put the U disk boot in the first place. Can).
Use Universal-USB-Installer to make USB boot
1. First download Universal USB Installer 1.8.3.1 version from the official homepage.
2. Prepare the operating system to be installed. This instruction uses the ubuntu-10.10-desktop-i386.iso version. You can download it from the ubuntu official website, http://www.ubuntu.org.cn.
3. Double-click the Universal USB Installer software, which is green software, and you will see the following interface.
  This is a license agreement, follow the GPL agreement, click the "I Agree" button to see the next interface.
This interface is the main operation interface, you only need to follow "Step1, 2, 3" to operate.
Select the type of operating system to install in Step1.
  In Step 2, select the system ISO file to be installed. It needs to be reminded here that the file name is based on limited matching, and the name of the image file is kept as much as possible. The file name of the default prompt is the same except for "*".
  Step3 Select the USB drive letter to be installed.
  Step4 is the prompt that will appear when installing the Ubuntu system, allowing you to select the permanent storage space reserved for the system in the USB flash drive. It seems that the maximum can only choose 4G. If there is enough space, try to divide it as much as possible to save the future shortage. If it is another system, there may not be one, and the system may allocate it directly. When installing centOS5, I did not see the prompt message of Step4.
  After the above steps are completed, click the "Create" button.
The first prompt interface that appears, allows you to confirm that the selected drive letter is your own USB flash drive. If you confirm it, click the "Yes (Y)" button, if not, click the "No (N)" button.
The second prompt interface that appears after the previous point of "Yes (Y)" allows you to confirm again, and the operation is irreversible after the warning point "Yes (Y)".
Enter the official installation interface, first unpack the ISO file.
Entering the process of allocating permanent space, this process is relatively long, and it took about 10 minutes to complete the 4G space.
After the permanent space allocation is completed, click the "Close" button on the final completed interface. The entire installation process took less than 20 minutes, mainly due to the time-consuming decompression and allocation of permanent space.
Finally, put a screenshot of the successful startup with a USB flash drive after the production is completed. The boot interface of ubuntu10.10. Finally, a reminder, if the USB is made successfully, every time you start it.
Linux system U disk installer (Universal USB Installer) V1.9.6.3 official latest version
Download URL http://www.xiazai.com/wins31362#js_active_url