Kubernetes installation
This article uses vultr virtual host to achieve
Invitation registration link: http://www.vultr.com/?ref=6940267
ETCD cluster installation: http://crabdave.iteye.com/blog/2365488
Configure docker and flannel: http://crabdave.iteye.com/blog/2365490
download kubernetes
kubernetes v1.3.0 is about 1.4G and downloads very quickly using the vultr instance in Tokyo
wget https://github.com/kubernetes/kubernetes/releases/download/v1.3.0/kubernetes.tar.gz
tar -xvf kubernetes.tar.gz
cd kubernetes / server
Unzip kubernetes-server-linux-amd64.tar.gz
-rw-r - r-- 1 root root 352M 7 月 1 2016 kubernetes-server-linux-amd64.tar.gz
tar -xvf kubernetes-server-linux-amd64.tar.gz
cd / root / kubernetes / server / kubernetes / server / bin
find ./ -perm 755 | xargs -i cp {} /usr/bin
The other two machines copy kubernetes to this machine
scp [email protected]: /root/kubernetes/server/kubernetes-server-linux-amd64.tar.gz ./
tar -xvf kubernetes-server-linux-amd64.tar.gz
cd / root / kubernetes / server / bin
cp kube-proxy /usr/bin
cp kubelet / usr / bin
---------------------------------
mkdir -p / opt / kubernetes /
cat <<EOF >/lib/systemd/system/kube-apiserver.service
[Unit]
Description=kube-apiserver
[Service]
EnvironmentFile=/etc/sysconfig/kube-apiserver
ExecStart=/usr/bin/kube-apiserver \$ETCD_SERVERS \\
\ $ LOG_DIR \\
\$SERVICE_CLUSTER_IP_RANGE \\
\$INSECURE_BIND_ADDRESS \\
\$INSECURE_PORT \\
\$BIND_ADDRESS \\
\$SECURE_PORT \\
\$AUTHORIZATION_MODE \\
\$AUTHORIZATION_FILE \\
\$BASIC_AUTH_FILE \\
\$KUBE_APISERVER_OPTS
Restart=on-failure
EOF
cat /lib/systemd/system/kube-apiserver.service
---------------------------------
cat <<EOF >/etc/sysconfig/kube-apiserver
# configure file for kube-apiserver
# --etcd-servers
ETCD_SERVERS='--etcd-servers=http://10.99.0.10:2380,http://10.99.0.11:2380,http://10.99.0.12:2380'
# --log-dir
LOG_DIR = '/ opt / kubernetes / logs'
# --service-cluster-ip-range
SERVICE_CLUSTER_IP_RANGE='--service-cluster-ip-range=172.16.0.0/16'
# --insecure-bind-address
INSECURE_BIND_ADDRESS='--insecure-bind-address=0.0.0.0'
# --insecure-port
INSECURE_PORT='--insecure-port=8080'
# --bind-address
BIND_ADDRESS='--bind-address=0.0.0.0'
# --secure-port
SECURE_PORT='--secure-port=6443'
# --authorization-mode
AUTHORIZATION_MODE='--authorization-mode=ABAC'
# --authorization-policy-file
AUTHORIZATION_FILE='--authorization-policy-file=/opt/kubernetes/authorization'
# --basic-auth-file
BASIC_AUTH_FILE='--basic-auth-file=/opt/kubernetes/authentication.csv'
# other parameters
KUBE_APISERVER_OPTS=''
EOF
cat /etc/sysconfig/kube-apiserver
---------------------------------
echo '{"user": "admin"}'>/opt/kubernetes/authorization
(password, username, userid):
echo "admin,admin,adminID" > /opt/kubernetes/authentication.csv
---------------------------------
Start kube-apiserver
systemctl daemon-reload
systemctl start kube-apiserver
systemctl status -l kube-apiserver
curl -L http://10.99.0.10:8080/healthz
tail -n 1000 /var/log/messages
----------------
Startup failed, check log
tail -n 1000 /var/log/messages
Abnormal
/lib/lsb/init-functions no such file or directory
need to be installed
yum install -y redhat-lsb
You can also run the following command to check whether the kube-apiserver is normal, and return 'ok' if it is normal:
curl -L http://10.99.0.10:8080/healthz
------------------------------------------------------------------
Create, configure and start the kube-controller-manager service
The three components are started in order, and the kube-controller-manager must be started after the kube-apiserver starts normally.
cat <<EOF >/etc/sysconfig/kube-controller
# configure file for kube-controller-manager
# --master
KUBE_MASTER='--master=http://10.99.0.10:8080'
# --log-dir
LOG_DIR='--log-dir=/opt/kubernetes/logs'
# --cloud-provider
CLOUD_PROVIDER='--cloud-provider='
# other parameters
KUBE_CONTROLLER_OPTS=''
EOF
cat /etc/sysconfig/kube-controller
---------------
cat <<EOF >/lib/systemd/system/kube-controller.service
[Unit]
Description=kube-controller-manager
After=kube-apiserver.service
Wants=kube-apiserver.service
[Service]
EnvironmentFile=/etc/sysconfig/kube-controller
ExecStart=/usr/bin/kube-controller-manager \$KUBE_MASTER \\
\ $ LOG_DIR \\
\$CLOUD_PROVIDER \\
\$KUBE_CONTROLLER_OPTS
Restart=on-failure
EOF
cat /lib/systemd/system/kube-controller.service
---------------
start kube-controller-manager
systemctl daemon-reload
systemctl start kube-controller
systemctl status -l kube-controller
------------------------------------------------------------------
Create, configure and start the kube-scheduler service
cat <<EOF >/etc/sysconfig/kube-scheduler
# configure file for kube-scheduler
# --master
KUBE_MASTER='--master=http://10.99.0.10:8080'
# --log-dir
LOG_DIR='--log-dir=/opt/kubernetes/logs'
# other parameters
KUBE_SCHEDULER_OPTS=''
EOF
cat /etc/sysconfig/kube-scheduler
-----------------
cat <<EOF >/lib/systemd/system/kube-scheduler.service
[Unit]
Description=kube-scheduler
After=kube-apiserver.service
Wants=kube-apiserver.service
[Service]
EnvironmentFile=/etc/sysconfig/kube-scheduler
ExecStart=/usr/bin/kube-scheduler \$KUBE_MASTER \\
\ $ LOG_DIR \\
\$KUBE_SCHEDULER_OPTS
Restart=on-failure
EOF
cat /lib/systemd/system/kube-scheduler.service
------------
Start kube-scheduler
systemctl daemon-reload
systemctl start kube-scheduler
systemctl status -l kube-scheduler
------------------------------------------------------------------
Start the k8s-node side and start configuring the two node machines
mkdir -p / opt / kubernetes /
--------------------------
Configure and start kube-proxy (three machines, restart the master api server)
cat <<EOF >/etc/sysconfig/kube-proxy
# configure file for kube-proxy
# --master
KUBE_MASTER='--master=http://10.99.0.10:8080'
# --proxy-mode
PROXY_MODE='--proxy-mode=iptables'
# --log-dir
LOG_DIR='--log-dir=/opt/kubernetes/logs'
# other parameters
KUBE_PROXY_OPTS=''" > /etc/sysconfig/kube-proxy
EOF
cat /etc/sysconfig/kube-proxy
--------------------------
cat <<EOF >/lib/systemd/system/kube-proxy.service
[Unit]
Description=kube-proxy
[Service]
EnvironmentFile=/etc/sysconfig/kube-proxy
ExecStart=/usr/bin/kube-proxy \$KUBE_MASTER \\
\$PROXY_MODE \\
\ $ LOG_DIR \\
\$KUBE_PROXY_OPTS
Restart=on-failure
EOF
cat /usr/lib/systemd/system/kube-proxy.service
Start kube-proxy
systemctl daemon-reload
systemctl start kube-proxy
systemctl status -l kube-proxy
------------------------------------------------------------------
Configure and start the kubelet
cat <<EOF >/lib/systemd/system/kubelet.service
[Unit]
Description = kubelet
[Service]
EnvironmentFile = / etc / sysconfig / kubelet
ExecStart=/usr/bin/kubelet \$API_SERVERS \\
\$ADDRESS \\
\$HOSTNAME_OVERRIDE \\
\$ALLOW_PRIVILEGED \\
\ $ POD_INFRA \\
\$CLUSTER_DNS \\
\$CLUSTER_DOMAIN \\
\$MAX_PODS \\
\ $ LOG_DIR \\
\ $ KUBELET_OPTS
Restart=on-failure
EOF
cat /lib/systemd/system/kubelet.service
-------------------------------
/etc/sysconfig/kubelet configures the 10.99.0.11 machine
cat <<EOF >/etc/sysconfig/kubelet
# configure file for kubelet
# --api-servers
API_SERVERS='--api-servers=http://10.99.0.10:8080'
# --address
ADDRESS='--address=0.0.0.0'
# --hostname-override
HOSTNAME_OVERRIDE='vultr.guest-11'
# --allow-privileged
ALLOW_PRIVILEGED='--allow-privileged=false'
# --pod-infra-container-image
#POD_INFRA = '- pod-infra-container-image = 10.23.23.76: 5000 / kubernetes / pause: latest'
# --cluster-dns
#CLUSTER_DNS='--cluster-dns=172.16.66.66'
# --cluster-domain
#CLUSTER_DOMAIN='--cluster-domain=cluster.local'
# --max-pods
MAX_PODS='--max-pods=70'
# --log-dir
LOG_DIR='--log-dir=/opt/kubernetes/logs'
# other parameters
KUBELET_OPTS = ''
EOF
cat /etc/sysconfig/kubelet
--------------
/etc/sysconfig/kubelet configures the 10.99.0.12 machine
cat <<EOF >/etc/sysconfig/kubelet
echo "# configure file for kubelet
# --api-servers
API_SERVERS='--api-servers=http://10.99.0.10:8080'
# --address
ADDRESS='--address=0.0.0.0'
# --hostname-override
HOSTNAME_OVERRIDE='vultr.guest-12'
# --allow-privileged
ALLOW_PRIVILEGED='--allow-privileged=false'
# --pod-infra-container-image
#POD_INFRA = '- pod-infra-container-image = 10.23.150.76: 5000 / kubernetes / pause: latest'
# --cluster-dns
#CLUSTER_DNS='--cluster-dns=172.16.66.66'
# --cluster-domain
#CLUSTER_DOMAIN='--cluster-domain=cluster.local'
# --max-pods
MAX_PODS='--max-pods=70'
# --log-dir
LOG_DIR='--log-dir=/opt/kubernetes/logs'
# other parameters
KUBELET_OPTS = ''
EOF
cat /etc/sysconfig/kubelet
--------------
start kubelet
systemctl daemon-reload
systemctl start kubelet
systemctl status -l kubelet
------------------------------------------------------------------
Back to master machine 10.99.0.10
kubectl --server=10.99.0.10:8080 get nodes
NAME STATUS AGE
vultr.guest-11 Ready 6m
vultr.guest-12 Ready 7m
------------------------------------------------------------------
mkdir -p ~/workspace
cd ~/workspace
echo " apiVersion: v1
kind: ReplicationController
metadata:
name: test-1
spec:
replicas: 1
template:
metadata:
labels:
app: test-1
spec:
containers:
- name: nginx-1
image: docker.io/nginx
nodeSelector:
kubernetes.io/hostname: vultr.guest-11" > test-1.yaml
cat test-1.yaml
echo " apiVersion: v1
kind: ReplicationController
metadata:
name: test-2
spec:
replicas: 1
template:
metadata:
labels:
app: test-2
spec:
containers:
- name: nginx-2
image: docker.io/nginx
nodeSelector:
kubernetes.io/hostname: vultr.guest-11" > test-2.yaml
cat test-2.yaml
echo " apiVersion: v1
kind: ReplicationController
metadata:
name: test-3
spec:
replicas: 1
template:
metadata:
labels:
app: test-3
spec:
containers:
- name: nginx-3
image: docker.io/nginx
nodeSelector:
kubernetes.io/hostname: vultr.guest-12" > test-3.yaml
cat test-3.yaml
echo " apiVersion: v1
kind: ReplicationController
metadata:
name: test-4
spec:
replicas: 1
template:
metadata:
labels:
app: test-4
spec:
containers:
- name: nginx-4
image: docker.io/nginx
nodeSelector:
kubernetes.io/hostname: vultr.guest-12" > test-4.yaml
cat test-4.yaml
------------------------------------------------------------------
kubectl --server=10.99.0.10:8080 create -f test-1.yaml
kubectl --server=10.99.0.10:8080 create -f test-2.yaml
kubectl --server=10.99.0.10:8080 create -f test-3.yaml
kubectl --server=10.99.0.10:8080 create -f test-4.yaml
kubectl --server=10.99.0.10:8080 get pods
NAME READY STATUS RESTARTS AGE
test-1-p4te6 1/1 Running 0 35s
test-2-7lvz6 1/1 Running 0 34s
test-3-21o5n 1/1 Running 0 34s
test-4-tfkkz 1/1 Running 0 34s
View IP address and other related information
kubectl --server=10.99.0.10:8080 describe pod test-1-p4te6
kubectl --server=10.99.0.10:8080 describe pod test-2-7lvz6
kubectl --server=10.99.0.10:8080 describe pod test-3-21o5n
kubectl --server=10.99.0.10:8080 describe pod test-4-tfkkz
------------------------------------------------------------------