It is believed that many companies nowadays manage their employees when they use the network. At this time, there are devices for managing online behaviors, including routers. So how do we set up router devices to manage online behaviors? The editor will tell you how to set up the online behavior management device !
1. Configuration requirements
It is necessary to realize that all employees accept behavior management control during working hours, and all employees do not accept behavior management control during off-duty hours, so as to achieve the purpose of humanized management.
2. Configuration steps
(1) Adding an IP address group: First, log in to the router configuration interface and add an address group in "Internet Behavior Management" - "IP Address Group". This address group includes the IP addresses of the employees who need to be managed. The specific interface is as follows:
(2) Add a time group: After the address group is added, you need to add a time group, and add working hours in "Internet Behavior Management" - "Time Group", as shown below:
(3) After adding the address group and time group, you can configure the behavior management: click "Internet Behavior Management" - "Behavior Management Policy" - "Add New Rule", first check "Enable Policy", and set the controlled The IP group and the corresponding controlled time are selected in the dialog box on the left, and the priority can be defaulted. After saving, the interface shown in the following figure will appear:
Note: "All Address Groups" and "All Time Groups" on the right are all the groups you have added in the router. If this rule needs to take effect on which address group and time group, move this address group to the left frame. 1. After adding the address group and time group, click "Apply Software Filtering", first tick "Enable Function" and then select the corresponding software you need to filter. As shown below:
2. After checking the corresponding software that needs to be blocked, enter the "URL classification" option box to make relevant settings, and first tick "Enable function". As shown below:
Function explanation: Prohibit IP access to website: After checking this function, logging in to the website by directly entering the IP address in the IE bar will also be blocked. Whitelist: Website domain names that are allowed to be accessed. Blacklist: Website domains that are prohibited from being accessed. "Leisure and Entertainment" - "Other Websites": The main website library collected by classification. Block: Forbid access to this type of website Record: Record the domain names browsed by the intranet PC Warning: The intranet PC will receive a corresponding warning when opening a web page. Jump address setting: Fill in the specified domain name, and it will automatically jump to the specified website when accessing restricted websites.
3. After completing the "URL classification" configuration, perform "WEB security configuration". As shown below:
Function explanation: Filter file extension type: After filling in the relevant extension, the corresponding file download can be filtered out. Filter URL keywords: After filling in relevant keywords, any website that includes this keyword will be blocked. Disable WEB page submission: After this function is activated, all BBS forums cannot post, but can only be browsed. 4. After completing the "WEB security configuration", perform the "electronic bulletin" configuration. As shown below
From: http://rj.uqidong.com/rjzn/syjq/27961.html
Function explanation: Announcement period: the time period of pop-up electronic bulletin, in minutes. Announcement title: the title of the electronic bulletin Announcement content: Edit the information to be published in this electronic bulletin 5. After completing the configuration of the electronic bulletin, the behavior management policy for the "employee address group" is completed. As shown below:
Note: The above-mentioned configurations can be selected according to their actual needs.