Fill Fill the selected area or the entire layer
with the foreground color [Alt]+[BackSpace] or [Alt]+[Del]
to pop up the "Fill" dialog box [Shift]+[BackSpace] or [Shift]+[F5]
from the history Fill in the record [Alt]+[Ctrl]+[Backspace]
to close the current image [Ctrl]+[W]
to open the "Preset" dialog box [Ctrl]+[K]
to display the last displayed "Preset" dialog box [ Alt]+[Ctrl]+[K]
Set the "General" option (in the preset dialog box) [Ctrl]+[1]
Set the "Save file" (in the preset dialog box) [Ctrl]+[2]
Set "Display and Cursor" (in the preset dialog box) [Ctrl]+[3]
Set "Transparent Area and Color Gamut" (in the preset dialog box) [Ctrl]+[4]
Set "Units and Rulers" (In the preset dialog box) [Ctrl]+[5]
Set "Guidelines and Grid" (in the preset dialog box) [Ctrl]+[6]
Set "Plugins and Scratch Disk" ( in the preset dialog box) In the preset dialog box ) 【Ctrl】+【7】
Set “Memory and Image Cache” (in the preset dialog box) 【Ctrl】+【8】
Edit operation 【Ctrl】+【Shift】+【Z】
Cut the selected image or path [Ctrl]+[X] or [F2]
Copy the selected image or path [Ctrl]+[C] or [F3]
Copy the selected image or path after the merged layer [Ctrl]+[Shift] ]+[C]
Paste the contents of the clipboard into the current graphic [Ctrl]+[V] or [F4]
Paste the contents of the clipboard into the marquee, and generate a mask in the way of displaying the marquee [Ctrl] +[Shift]+[V]
Paste the contents of the clipboard into the marquee, and create a mask by hiding the marquee [Ctrl]+[Shift]+[Alt]+[V]
Free Transform [Ctrl]+ 【T】
Apply Free Transform (in Free Transform Mode) 【Enter】
Start Transform from Center or Symmetric Point (In Free Transform Mode) 【Alt】
Restrict (In Free Transform Mode) 【Shift】
Twist (In Free Transform Mode) Down) [Ctrl]
Cancel deformation (in free transform mode) [Esc]
Freely transform the copied pixel data [Ctrl]+[Shift]+[T]
Transform the copied pixel data again and create a copy [Ctrl]+ 【Shift】+【Alt】+【T】
Delete the pattern in the marquee or the selected path 【DEL】
Fill the selected area or the entire layer with the foreground color 【Alt】+【BackSpace】or 【Alt】+【Del】
Fill the selected area or the entire layer with the background color [Ctrl]+[BackSpace] or [Ctrl]+[Del]
to pop up the "Fill" dialog box [Shift]+[BackSpace] or [Shift]+[F5]
Fill the opaque region of the current layer with the foreground color [Shift]+[Alt]+[Del]
Fill the opaque region of the current layer with the background color [Shift]+[Ctrl]+[Del]
Fill from the history [Alt] +【Ctrl】+【Backspace】
Image
Adjustment Each option will be set as its default value from the last time this command is used)
Adjust the color level【Ctrl】+【L】(The same as above 【Ctrl】+【Alt】+【L】The option to adjust the color level is the historical setting. The default value)
automatically adjust the level [Ctrl] + [Shift] + [L]
to open the curve adjustment dialog box [Ctrl] + [M]
to add a new point on the curve of the selected channel ('Curve' dialog box middle) in the image【Ctrl】plus click to add new points on all curves except compound curves (in the 'curve' dialog box) 【Ctrl】+【Shift】plus click to
move selected point (the 'curve' dialog box) Middle) 【↑】/【↓】/【←】/【→】
Move the selected point in increments of 10 points (in the 'curve' dialog) 【Shift】+【Arrow】
Select multiple controls Point (in the 'Curve' dialog box) [Shift] + click to move the control point forward (in the 'Curve' dialog box) [Ctrl]+[Tab] Move the control point backward (in the 'Curve' dialog box) [Ctrl]+[ Shift]+[Tab] Add a new point (in the 'Curve' dialog) Click the grid to delete a point (in the 'Curve' dialog) [Ctrl] Add a point and click
Deselect all points on the selected channel ('Curve' ' dialog) 【Ctrl】+【D】
Make the curve grid finer or coarser (in the 'Curves' dialog) [Alt]+click the grid to select the color channel (in the 'Curves' dialog) [Ctrl]+[~]
Select the monochrome channel (in the ' Curves' dialog) In the dialog box) 【Ctrl】+【Number】
Open the "Color Balance" dialog box 【Ctrl】+【B】
Open the "Hue/Saturation" dialog box 【Ctrl】+【U】
Adjust the whole image (in Hue/Saturation ” dialog box) 【Ctrl】+【~】
Adjust red only (in Hue/Saturation dialog box) 【Ctrl】+【1】
Adjust ** only (in Hue/Saturation dialog box) 【Ctrl】 ]+[2]
Adjust only green (in the Hue/Saturation dialog) [Ctrl]+[3]
Adjust only cyan (in the Hue/Saturation dialog) [Ctrl]+[4]
Adjust only blue Hue (in the Hue/Saturation dialog box) 【Ctrl】+【5】
Adjust magenta only (in the Hue/Saturation dialog box) 【Ctrl】+【6】Desaturate
【Ctrl】+【Shift】+ 【U】 Invert
【Ctrl】+【I】
Layer operation
Ctrl]+[Shift]+[N]
Create a new layer with default options [Ctrl]+[Alt]+[Shift]+[N]
Copy the selected layer or create a layer with the selected area 【Ctrl】+【J】
Create a layer by copying and rename the new layer 【Ctrl】+【Alt】+【J】
Create a layer by cutting [Ctrl]+[Shift]+[J]
Create a layer by cutting and rename the new layer [Ctrl]+[Alt]+[Shift]+[J]
with the previous layer Group【Ctrl】+【G】
Ungroup 【Ctrl】+【Shift】+【G】
Merge down or merge connected layers 【Ctrl】+【E】
Merge visible layers 【Ctrl】+【Shift】+【E 】
Stamp or stamp connected layers【Ctrl】+【Alt】+【E】
Stamp visible layers to the current layer 【Ctrl】+【Alt】+【Shift】+【E】
Move the current layer down one layer [Ctrl]+[[]
Move the current layer up one layer [Ctrl]+[]]
Move the current layer to the bottom [Ctrl]+[Shift]+[[]
Move the current layer to the top [Ctrl]+ 【Shift】+【]】
Activate the next layer 【Alt】+【[】
Activate the previous layer 【Alt】+【]】
Activate the bottom layer 【Shift】+【Alt】+【[】
Activate the top layer 【Shift】+【Alt】+【]】
Adjust the transparency of the current layer (the current tool has no numerical parameters, such as the move tool) 【0】to【9】
Retain the transparent area of the current layer (switch) 【/】
Remove the effect of the layer [Alt] + double-click the "Effect" icon
Drop shadow effect (in the "Effect" dialog box) [Ctrl] + [1]
Inner shadow effect (in the "Effects" dialog box) [Ctrl]+[2]
Outer glow effect (in the "Effects" dialog box) [Ctrl]+[3]
Inner glow effect (in the "Effects" dialog box) 【Ctrl】+【4】
Bevel and Emboss effects (in the "Effects" dialog box) 【Ctrl】+【5】
Apply the currently selected effect and make the parameters adjustable (in the "Effects" dialog box) 【A】
Select Function
_
_
_ Secondary selection [Ctrl]+[Shift]+[D]
Feather selection [Ctrl]+[Alt]+[D] or [Shift]+[F6]
reverse selection [Ctrl]+[Shift]+[I] or [ Shift] + [F7]
Path change selection area number keyboard [Enter] (after V6.0 it becomes [Ctrl] + number keyboard [Enter])
Load selection [Ctrl] + click on the layer, path, channel panel The thumbnail image in the
load the selection corresponding to the monochrome channel【Ctrl】+【Alt】+【Number】
Select the highlight 【ctrl+alt+2】
Filter F] Repeat the filter made last time (adjustable parameters) [Ctrl]+[Alt]+[F]
Selection Tool (in the "3D Transformation" filter) [V]
Cube Tool (in the "3D Transformation" filter) [M]
Sphere Tool (in the "3D Transformation" filter) [N]
Cylinder Tool ( in the "3D Transformation" filter) "3D Change" filter) 【C】
Trackball (in "3D Change" filter) 【R】
Panorama Camera Tool (in "3D Change" filter) 【E】
View Operation Preview in CMYK (Switch) 【Ctrl】+【Y】 Turn on/off color gamut warning 【Ctrl】+【Shift】+【Y】 Enlarge view 【Ctrl】+【+】 Zoom out 【Ctrl】+【-】 Enlarge View and fit to the window [Ctrl]+[Alt]+[+] Zoom out and fit to the window [Ctrl]+[Alt]+[-] Full canvas display [Ctrl]+[0] or double-click the hand tool to display the actual pixels [Ctrl]+[Alt]+[0] or double-click the zoom tool Toolbox (multiple tools share a shortcut key, you can press [Shift] and this shortcut key at the same time to select) rectangle, ellipse marquee tool [M] Crop tool [ C] Move Tool [V] Lasso, Polygonal Lasso, Magnetic Lasso [L] Magic Wand Tool [W]
Airbrush Tool [J]
Brush Tool [B]
Like Leather Stamp, Pattern Stamp [S]
History Brush Tool [Y]
Like Leather Wipe Tool [E]
Pencil, Line Tool [N]
Blur, Sharpen, Smudge Tool [R]
Dodge, Burn, Sponge Tool [O]
Pen, Freeform Pen, Magnetic Pen [P]
Add Anchor Point Tool [+]
Delete Anchor Point Tool [-]
Direct Selection Tool [A]
Text, Text Mask, Vertical Text , Vertical Text Mask [T]
Measure Tool [U]
Linear Gradient, Radial Gradient, Symmetric Gradient, Angle Gradient, Diamond Gradient [G]
Paint Bucket Tool [K]
Eyedropper, Color Sampler [I]
Hand Tool [ H]
Zoom tool [Z]
Default foreground and background color [D]
Switch foreground and background color [X]
Switch between standard mode and quick mask mode [Q]
Standard screen mode, full screen mode with menu bar, full screen mode [F]
Temporarily use the move tool [Ctrl]
Temporarily use the color absorption tool [Alt]
Temporarily use the hand tool [Space]
Open the tool options panel [Enter]
Quickly enter tool options
(there is at least one adjustable number in the current tool options panel) 【0】to【9】
Cycle selection brushes [[] or []]
Select the first brush [Shift]+[[]
Select the last brush [Shift]+[]]
Create a new gradient (in the "Gradient Editor") [Ctrl]+[ N]
File operation
Create graphic file [Ctrl]+[N]
Create a new file with default settings [Ctrl]+[Alt]+[N]
Open an existing image [Ctrl]+[O]
Open as... [Ctrl ] ]+[Alt]+[O]
Close the current image [Ctrl]+[W]
Save the current image [Ctrl]+[S]
Save as... [Ctrl]+[Shift]+[ S] Save a
copy [Ctrl] +【Alt】+【S】
Page Setup【Ctrl】+【Shift】+【P】
Print【Ctrl】+【P】
Open the "Preset" dialog box 【Ctrl】+【K】
Display the last displayed "Preset" [Alt]+[Ctrl]+[K]
to set the "General" option (in the preset dialog) [Ctrl]+[1]
to set the "Save file" (in the preset dialog) [Ctrl] ]+[2]
Set “Display and Cursor” (in the preset dialog) [Ctrl]+[3]
Set “Transparent Area and Color Gamut” (in the preset dialog) [Ctrl]+[4]
Set "Units and rulers" (in the preset dialog box) 【Ctrl】+【5】
Set "Guidelines and Grid" (in the preset dialog box) [Ctrl]+[6]
Set "Plugins and Scratch Disk" (in the preset dialog box) [Ctrl]+[7]
Set "Memory" "With Image Cache" (in the Preferences dialog) [Ctrl]+[8]
Edit operation
Revert /Redo previous operation [Ctrl]+[Z]
Revert more than two steps [Ctrl]+[Alt]+[ Z]
Redo more than two steps [Ctrl]+[Shift]+[Z]
Cut the selected image or path [Ctrl]+[X] or [F2]
Copy the selected image or path [Ctrl]+[C]
Merge and copy【Ctrl】+【Shift】+【C】
Paste the contents of the clipboard into the current drawing【Ctrl】+【V】or【F4】
Paste the contents of the clipboard into the selection box【Ctrl】+【Shift ]+[V]
Free Transform [Ctrl]+[T]
Apply Free Transform (in Free Transform mode) [Enter]
Start transform from center or symmetrical point (in Free Transform mode) [Alt]
Limit (in Free Transform mode) Down) [Shift]
Distort (in free transformation mode) [Ctrl]
Cancel deformation (in free transformation mode) [Esc]
Freely transform the copied pixel data [Ctrl]+[Shift]+[T]
Transform the copied pixel data again Pixel data and create a copy [Ctrl]+[Shift]+[Alt]+[T]
Delete the pattern in the selection box or the selected path [DEL]
Fill the selected area or the entire layer with the background color [Ctrl]+[BackSpace] or [Ctrl]+[Del]
F1 - Help
F2 - Cut
F3 - Copy
F4 - Paste F5 -
Hide/Show Brush Panel
F6 - Hide/ Show Colors Panel
F7-Hide/Show Layers Panel
F8-Hide/Show Info Panel
F9-Hide/Show Action Panel
F12-Restore
Shift+f5-Fill
EShift+f6-Feather
Shift+f7-Select→Invert
ctrl+h-Hide selected area hide path
ctrl+d - deselect area
ctrl+w - close file
ctrl+Q - quit Photoshop
Esc - cancel operation
with the foreground color [Alt]+[BackSpace] or [Alt]+[Del]
to pop up the "Fill" dialog box [Shift]+[BackSpace] or [Shift]+[F5]
from the history Fill in the record [Alt]+[Ctrl]+[Backspace]
to close the current image [Ctrl]+[W]
to open the "Preset" dialog box [Ctrl]+[K]
to display the last displayed "Preset" dialog box [ Alt]+[Ctrl]+[K]
Set the "General" option (in the preset dialog box) [Ctrl]+[1]
Set the "Save file" (in the preset dialog box) [Ctrl]+[2]
Set "Display and Cursor" (in the preset dialog box) [Ctrl]+[3]
Set "Transparent Area and Color Gamut" (in the preset dialog box) [Ctrl]+[4]
Set "Units and Rulers" (In the preset dialog box) [Ctrl]+[5]
Set "Guidelines and Grid" (in the preset dialog box) [Ctrl]+[6]
Set "Plugins and Scratch Disk" ( in the preset dialog box) In the preset dialog box ) 【Ctrl】+【7】
Set “Memory and Image Cache” (in the preset dialog box) 【Ctrl】+【8】
Edit operation 【Ctrl】+【Shift】+【Z】
Cut the selected image or path [Ctrl]+[X] or [F2]
Copy the selected image or path [Ctrl]+[C] or [F3]
Copy the selected image or path after the merged layer [Ctrl]+[Shift] ]+[C]
Paste the contents of the clipboard into the current graphic [Ctrl]+[V] or [F4]
Paste the contents of the clipboard into the marquee, and generate a mask in the way of displaying the marquee [Ctrl] +[Shift]+[V]
Paste the contents of the clipboard into the marquee, and create a mask by hiding the marquee [Ctrl]+[Shift]+[Alt]+[V]
Free Transform [Ctrl]+ 【T】
Apply Free Transform (in Free Transform Mode) 【Enter】
Start Transform from Center or Symmetric Point (In Free Transform Mode) 【Alt】
Restrict (In Free Transform Mode) 【Shift】
Twist (In Free Transform Mode) Down) [Ctrl]
Cancel deformation (in free transform mode) [Esc]
Freely transform the copied pixel data [Ctrl]+[Shift]+[T]
Transform the copied pixel data again and create a copy [Ctrl]+ 【Shift】+【Alt】+【T】
Delete the pattern in the marquee or the selected path 【DEL】
Fill the selected area or the entire layer with the foreground color 【Alt】+【BackSpace】or 【Alt】+【Del】
Fill the selected area or the entire layer with the background color [Ctrl]+[BackSpace] or [Ctrl]+[Del]
to pop up the "Fill" dialog box [Shift]+[BackSpace] or [Shift]+[F5]
Fill the opaque region of the current layer with the foreground color [Shift]+[Alt]+[Del]
Fill the opaque region of the current layer with the background color [Shift]+[Ctrl]+[Del]
Fill from the history [Alt] +【Ctrl】+【Backspace】
Image
Adjustment Each option will be set as its default value from the last time this command is used)
Adjust the color level【Ctrl】+【L】(The same as above 【Ctrl】+【Alt】+【L】The option to adjust the color level is the historical setting. The default value)
automatically adjust the level [Ctrl] + [Shift] + [L]
to open the curve adjustment dialog box [Ctrl] + [M]
to add a new point on the curve of the selected channel ('Curve' dialog box middle) in the image【Ctrl】plus click to add new points on all curves except compound curves (in the 'curve' dialog box) 【Ctrl】+【Shift】plus click to
move selected point (the 'curve' dialog box) Middle) 【↑】/【↓】/【←】/【→】
Move the selected point in increments of 10 points (in the 'curve' dialog) 【Shift】+【Arrow】
Select multiple controls Point (in the 'Curve' dialog box) [Shift] + click to move the control point forward (in the 'Curve' dialog box) [Ctrl]+[Tab] Move the control point backward (in the 'Curve' dialog box) [Ctrl]+[ Shift]+[Tab] Add a new point (in the 'Curve' dialog) Click the grid to delete a point (in the 'Curve' dialog) [Ctrl] Add a point and click
Deselect all points on the selected channel ('Curve' ' dialog) 【Ctrl】+【D】
Make the curve grid finer or coarser (in the 'Curves' dialog) [Alt]+click the grid to select the color channel (in the 'Curves' dialog) [Ctrl]+[~]
Select the monochrome channel (in the ' Curves' dialog) In the dialog box) 【Ctrl】+【Number】
Open the "Color Balance" dialog box 【Ctrl】+【B】
Open the "Hue/Saturation" dialog box 【Ctrl】+【U】
Adjust the whole image (in Hue/Saturation ” dialog box) 【Ctrl】+【~】
Adjust red only (in Hue/Saturation dialog box) 【Ctrl】+【1】
Adjust ** only (in Hue/Saturation dialog box) 【Ctrl】 ]+[2]
Adjust only green (in the Hue/Saturation dialog) [Ctrl]+[3]
Adjust only cyan (in the Hue/Saturation dialog) [Ctrl]+[4]
Adjust only blue Hue (in the Hue/Saturation dialog box) 【Ctrl】+【5】
Adjust magenta only (in the Hue/Saturation dialog box) 【Ctrl】+【6】Desaturate
【Ctrl】+【Shift】+ 【U】 Invert
【Ctrl】+【I】
Layer operation
Ctrl]+[Shift]+[N]
Create a new layer with default options [Ctrl]+[Alt]+[Shift]+[N]
Copy the selected layer or create a layer with the selected area 【Ctrl】+【J】
Create a layer by copying and rename the new layer 【Ctrl】+【Alt】+【J】
Create a layer by cutting [Ctrl]+[Shift]+[J]
Create a layer by cutting and rename the new layer [Ctrl]+[Alt]+[Shift]+[J]
with the previous layer Group【Ctrl】+【G】
Ungroup 【Ctrl】+【Shift】+【G】
Merge down or merge connected layers 【Ctrl】+【E】
Merge visible layers 【Ctrl】+【Shift】+【E 】
Stamp or stamp connected layers【Ctrl】+【Alt】+【E】
Stamp visible layers to the current layer 【Ctrl】+【Alt】+【Shift】+【E】
Move the current layer down one layer [Ctrl]+[[]
Move the current layer up one layer [Ctrl]+[]]
Move the current layer to the bottom [Ctrl]+[Shift]+[[]
Move the current layer to the top [Ctrl]+ 【Shift】+【]】
Activate the next layer 【Alt】+【[】
Activate the previous layer 【Alt】+【]】
Activate the bottom layer 【Shift】+【Alt】+【[】
Activate the top layer 【Shift】+【Alt】+【]】
Adjust the transparency of the current layer (the current tool has no numerical parameters, such as the move tool) 【0】to【9】
Retain the transparent area of the current layer (switch) 【/】
Remove the effect of the layer [Alt] + double-click the "Effect" icon
Drop shadow effect (in the "Effect" dialog box) [Ctrl] + [1]
Inner shadow effect (in the "Effects" dialog box) [Ctrl]+[2]
Outer glow effect (in the "Effects" dialog box) [Ctrl]+[3]
Inner glow effect (in the "Effects" dialog box) 【Ctrl】+【4】
Bevel and Emboss effects (in the "Effects" dialog box) 【Ctrl】+【5】
Apply the currently selected effect and make the parameters adjustable (in the "Effects" dialog box) 【A】
Select Function
_
_
_ Secondary selection [Ctrl]+[Shift]+[D]
Feather selection [Ctrl]+[Alt]+[D] or [Shift]+[F6]
reverse selection [Ctrl]+[Shift]+[I] or [ Shift] + [F7]
Path change selection area number keyboard [Enter] (after V6.0 it becomes [Ctrl] + number keyboard [Enter])
Load selection [Ctrl] + click on the layer, path, channel panel The thumbnail image in the
load the selection corresponding to the monochrome channel【Ctrl】+【Alt】+【Number】
Select the highlight 【ctrl+alt+2】
Filter F] Repeat the filter made last time (adjustable parameters) [Ctrl]+[Alt]+[F]
Selection Tool (in the "3D Transformation" filter) [V]
Cube Tool (in the "3D Transformation" filter) [M]
Sphere Tool (in the "3D Transformation" filter) [N]
Cylinder Tool ( in the "3D Transformation" filter) "3D Change" filter) 【C】
Trackball (in "3D Change" filter) 【R】
Panorama Camera Tool (in "3D Change" filter) 【E】
View Operation Preview in CMYK (Switch) 【Ctrl】+【Y】 Turn on/off color gamut warning 【Ctrl】+【Shift】+【Y】 Enlarge view 【Ctrl】+【+】 Zoom out 【Ctrl】+【-】 Enlarge View and fit to the window [Ctrl]+[Alt]+[+] Zoom out and fit to the window [Ctrl]+[Alt]+[-] Full canvas display [Ctrl]+[0] or double-click the hand tool to display the actual pixels [Ctrl]+[Alt]+[0] or double-click the zoom tool Toolbox (multiple tools share a shortcut key, you can press [Shift] and this shortcut key at the same time to select) rectangle, ellipse marquee tool [M] Crop tool [ C] Move Tool [V] Lasso, Polygonal Lasso, Magnetic Lasso [L] Magic Wand Tool [W]
Airbrush Tool [J]
Brush Tool [B]
Like Leather Stamp, Pattern Stamp [S]
History Brush Tool [Y]
Like Leather Wipe Tool [E]
Pencil, Line Tool [N]
Blur, Sharpen, Smudge Tool [R]
Dodge, Burn, Sponge Tool [O]
Pen, Freeform Pen, Magnetic Pen [P]
Add Anchor Point Tool [+]
Delete Anchor Point Tool [-]
Direct Selection Tool [A]
Text, Text Mask, Vertical Text , Vertical Text Mask [T]
Measure Tool [U]
Linear Gradient, Radial Gradient, Symmetric Gradient, Angle Gradient, Diamond Gradient [G]
Paint Bucket Tool [K]
Eyedropper, Color Sampler [I]
Hand Tool [ H]
Zoom tool [Z]
Default foreground and background color [D]
Switch foreground and background color [X]
Switch between standard mode and quick mask mode [Q]
Standard screen mode, full screen mode with menu bar, full screen mode [F]
Temporarily use the move tool [Ctrl]
Temporarily use the color absorption tool [Alt]
Temporarily use the hand tool [Space]
Open the tool options panel [Enter]
Quickly enter tool options
(there is at least one adjustable number in the current tool options panel) 【0】to【9】
Cycle selection brushes [[] or []]
Select the first brush [Shift]+[[]
Select the last brush [Shift]+[]]
Create a new gradient (in the "Gradient Editor") [Ctrl]+[ N]
File operation
Create graphic file [Ctrl]+[N]
Create a new file with default settings [Ctrl]+[Alt]+[N]
Open an existing image [Ctrl]+[O]
Open as... [Ctrl ] ]+[Alt]+[O]
Close the current image [Ctrl]+[W]
Save the current image [Ctrl]+[S]
Save as... [Ctrl]+[Shift]+[ S] Save a
copy [Ctrl] +【Alt】+【S】
Page Setup【Ctrl】+【Shift】+【P】
Print【Ctrl】+【P】
Open the "Preset" dialog box 【Ctrl】+【K】
Display the last displayed "Preset" [Alt]+[Ctrl]+[K]
to set the "General" option (in the preset dialog) [Ctrl]+[1]
to set the "Save file" (in the preset dialog) [Ctrl] ]+[2]
Set “Display and Cursor” (in the preset dialog) [Ctrl]+[3]
Set “Transparent Area and Color Gamut” (in the preset dialog) [Ctrl]+[4]
Set "Units and rulers" (in the preset dialog box) 【Ctrl】+【5】
Set "Guidelines and Grid" (in the preset dialog box) [Ctrl]+[6]
Set "Plugins and Scratch Disk" (in the preset dialog box) [Ctrl]+[7]
Set "Memory" "With Image Cache" (in the Preferences dialog) [Ctrl]+[8]
Edit operation
Revert /Redo previous operation [Ctrl]+[Z]
Revert more than two steps [Ctrl]+[Alt]+[ Z]
Redo more than two steps [Ctrl]+[Shift]+[Z]
Cut the selected image or path [Ctrl]+[X] or [F2]
Copy the selected image or path [Ctrl]+[C]
Merge and copy【Ctrl】+【Shift】+【C】
Paste the contents of the clipboard into the current drawing【Ctrl】+【V】or【F4】
Paste the contents of the clipboard into the selection box【Ctrl】+【Shift ]+[V]
Free Transform [Ctrl]+[T]
Apply Free Transform (in Free Transform mode) [Enter]
Start transform from center or symmetrical point (in Free Transform mode) [Alt]
Limit (in Free Transform mode) Down) [Shift]
Distort (in free transformation mode) [Ctrl]
Cancel deformation (in free transformation mode) [Esc]
Freely transform the copied pixel data [Ctrl]+[Shift]+[T]
Transform the copied pixel data again Pixel data and create a copy [Ctrl]+[Shift]+[Alt]+[T]
Delete the pattern in the selection box or the selected path [DEL]
Fill the selected area or the entire layer with the background color [Ctrl]+[BackSpace] or [Ctrl]+[Del]
F1 - Help
F2 - Cut
F3 - Copy
F4 - Paste F5 -
Hide/Show Brush Panel
F6 - Hide/ Show Colors Panel
F7-Hide/Show Layers Panel
F8-Hide/Show Info Panel
F9-Hide/Show Action Panel
F12-Restore
Shift+f5-Fill
EShift+f6-Feather
Shift+f7-Select→Invert
ctrl+h-Hide selected area hide path
ctrl+d - deselect area
ctrl+w - close file
ctrl+Q - quit Photoshop
Esc - cancel operation