TX2shuaji
First, Jetpack 3.1 is required to have the ability to install images.
Then, enter
RECOVERY mode:
1. Use the blue USB cable to connect the USB port in the middle of the TX2 to the ubuntu x86 computer
2. While pressing the RECOVERY button, turn on TX2; or
while pressing the RECOVERY button, press the reset button of TX2
3. After lsusb on X86, you can see the nvidia device, indicating that it has entered the RECOVERY mode correctly
Then:
Run the following script to clone and restore respectively.
----------------------clone:-----------------------
cd /home /zp/Develop_TX2/64_TX2/Linux_for_Tegra_tx2
sudo ./flash.sh -r -k APP -G system.img jetson-tx2 mmcblk0p1
cloned image, in Linux_for_Tegra_tx2 folder.
cd /home /zp/Develop_TX2/64_TX2/Linux_for_Tegra_tx2
sudo ./flash.sh -r -k APP -G system.img jetson-tx2 mmcblk0p1
cloned image, in Linux_for_Tegra_tx2 folder.
----------------------recovery:-------------------You
need to restore the image to be restored first , placed in the bootloader folder:
cd /home/zp/Develop_TX2/64_TX2/Linux_for_Tegra_tx2
sudo ./flash.sh -r jetson-tx2 mmcblk0p1
cankao
1.https://blog.csdn.net/hanxuexiaoma/article/details/78968445;
2.https://developer.nvidia.com/embedded/jetpack;
3.https://docs.nvidia.com/jetpack-l4t/#developertools/mobile/jetpack/l4t/3.2rc/jetpack_l4t_install.htm%3FTocPath%3D_____3
4.https://www.ncnynl.com/archives/201706/1740.html
5. https://jingyan.baidu.com/article/7908e85c725159af481ad2f7.html