Checklist:
1. Jetson tx2, matching mouse keyboard monitor, usb data cable (included)
2. A computer with ubuntu18.04 installed
3. Installation instructions on NVIDIA official website https://developer.nvidia.com/nvidia-sdk-manager
4. Patience
Description:
The computer is used as the host, and the sdk manager is installed on the host, and then download and write jetpack4.2 to the tx2 board.
Follow the instructions of the sdk manager to install. The information on the Internet is relatively old. It is most reliable to follow the instructions on the official website and the hardware box.
More error-prone places:
1. When flashing to tx2, remember to follow the instructions of the manual to flash.
2. Burning tx2 is divided into two parts, burning the operating system and burning components. After burning the operating system, it will prompt tx2 to boot and log in, and then burn the components. When burning the components, the Opencv and Visual of the AI part The work part is very slow and wait patiently.
3. If you encounter a problem, you can see the log in the terminal part, and there will be an error message.
It looks like this after completion:
The reason for skipping target hardware programming is that after the part of the operating system is written, the component that is written later will first check whether there is an operating system, and skip if it has.
Comes with point cloud demo:
