The Dahua DH-NMS8100 intelligent operation and maintenance management system platform has obvious functional advantages. Its existence can greatly reduce the manpower in the platform maintenance operation, and can monitor the offline status of the equipment, whether it is faulty, and the video quality. Distributed construction is carried out according to requirements, and maintenance personnel can also regularly export corresponding reports, which can intuitively understand the equipment utilization rate and operation efficiency of the entire platform.
[Security Knowledge Network] Dahua DH-NMS8100 intelligent operation and maintenance management system platform has obvious functional advantages. Its existence can greatly reduce the manpower in platform maintenance operations, and it can be used for equipment offline, whether it is faulty, video quality, etc. Once monitoring, and distributed construction can be carried out according to requirements, maintenance personnel can also regularly export corresponding reports, and can intuitively understand the equipment utilization rate and operation efficiency of the entire platform.
As a very important project in urban security, Safe City has invested in countless front-end cameras, switches, back-end storage NVRs, and servers. However, there are often many problems, including: 1. Low effective utilization rate of monitoring system: long equipment inspection cycle, low efficiency, untimely detection of faulty equipment, and unstable maintenance cycle, resulting in both efficiency and benefits from the investment of the entire monitoring system. Not high; 2. The workload of equipment inspection is heavy: the monitoring personnel are easily fatigued in the face of long-term observation of multi-channel video, and often miss a lot of alarm prompts, including equipment failure, equipment alarm, etc.; 3. Lack of planning and operation Maintenance process: When the front-end camera, back-end storage, server and other equipment fail, the engineering company cannot grasp the situation immediately, and the operation and maintenance personnel miss the information of the faulty equipment. Without a standardized operation and maintenance management process, it will be greatly reduced. Overall platform benefit; 4. Lack of operation and maintenance assessment statistics: It is difficult to assess the operation and maintenance effect of the engineering company due to the inability to grasp the equipment failure rate, equipment failure time, maintenance times, maintenance time and other record information. All of this creates inefficiencies, incomplete monitoring platforms, and more. Faced with various problems, how to solve them? Or Dahua DH-NMS8100 intelligent operation and maintenance management system is one of the better solutions.
Quickly query monitoring points for resource management
When arranging the entire platform, all camera information in the system can be entered, including camera number, channel name, usage protocol, usage occasion, key area and other 3 categories and 34 subcategories for information management, which is convenient for users to locate quickly in the future. At a certain point, such as airports, railway stations and other public places, users can quickly search for various relevant points according to the actual situation, and can conduct timely business processing and data collection, which is more convenient for daily maintenance and usage.
Don't be afraid of system inspection equipment failure
The DH-NMS8100 intelligent operation and maintenance management system platform can run as a general server device, and can be connected as a terminal device in a large platform to complete the construction of the system and the realization of the operation and maintenance function. The platform adopts intelligent analysis, fault detection, and integrates functions such as video quality diagnosis and equipment status detection, combined with fault linkage alarm, data statistical reports and other services, to implement unattended, intelligent operation and maintenance, statistical analysis and other functions. The aforementioned problems can be solved. For a single operation and maintenance platform server, the maximum support can achieve 1000 channels of video quality diagnosis and 50 network device status detection.
The operation interface of the platform is very simple. The upper part is guided by the home page, map, status, alarm, repair report, statistics, settings, and network management. With the operation and maintenance platform based on SNMP protocol, it can realize the status of network equipment in the whole large platform. Monitoring and information collection, including device self-discovery, automatic network topology, real-time network traffic monitoring, viewing of server CPU memory usage, packet loss rate detection, etc., and traditional operation and maintenance management functions such as batch distribution. In addition, for Dahua's own equipment, or through the integration of various manufacturers' equipment SDKs and other secondary development docking, the front-end cameras, back-end storage devices, servers, etc. can be completed offline, disk status, video integrity, etc. Detect, and automatically summarize according to the collected information, and form various reports (pie chart, bar chart, Excel). Record which day and time period the device has problems, and whether the stored video is successfully stored, lost, etc. can be recorded one by one. At the same time, the platform can be combined with an electronic map, and the camera at which point can be clearly marked on the map is not running. The entire operation and maintenance platform, whether it is operation or equipment maintenance, is very user-friendly, which not only reduces the workload of operation and maintenance personnel, but also ensures the operation efficiency of equipment, which is worthy of praise.
Maximize the benefits of the combination of repair application and assessment
The platform supports automatic inspection and diagnosis of the online number and video quality of all front-end devices according to the time set by the user every day. The platform will issue an alarm and record relevant information. At the same time, the operator can immediately call the corresponding camera to verify the actual situation. After the event, the system maintenance personnel will regularly record the actual situation of the corresponding camera at regular intervals. The subsequent maintenance personnel will enter the corresponding platform to view the report according to the authority assigned by the system, and export the report and send it to different maintenance manufacturers. After the manufacturer maintains it, enter the system to fill in Maintenance feedback, etc., to form a complete business closed loop of platform system discovery of problems - positioning problems - maintenance problems - maintenance feedback.
In addition, the platform has an assessment function, which can comprehensively generate various reports according to the channel online rate, channel integrity rate, work order maintenance record statistics, faulty equipment conditions, etc., and quickly customize various report status diagrams ( Pie chart, bar chart, Excel), enabling users to visualize, intuitively and quickly understand the maintenance efficiency of each maintenance manufacturer. The data report generated every day will be automatically saved, and users can export the maintenance report of a certain day at any time, and can clearly understand the location, operation and so on of each device.
Expert opinion: A very excellent operation and maintenance management and control equipment, which is rare in the industry and is worthy of praise.
Recommended reading:
For more security product evaluation videos, please follow the as TV show