1. L method: it is the most basic method COPYSURFACE, which is the most talked about method in the textbook of a Taiwanese professor.
2. Cutting method: Many times, when we perform parting after finishing the parting surface, we find that it is inseparable and there are many green lines and red dots. At this time, we can choose the cutting method. The specific method is: directly The parting surface is copied and extended to the thickness of the front mold core in the direction of the front mold, closed to generate the front mold core, and then made a solid as the back mold core, cut off the front mold part with the parting mold, and then directly CUTOUT out with the reference part After the mold core cavity comes.
3. Of course, the accuracy modification method can also be used to solve the situation that occurs in 2. Adjust the accuracy appropriately, and some situations can also be solved. You can also adjust the mold accuracy and product accuracy during the design process to keep the same, (preferably In CONFIG) directly set the product accuracy and mold accuracy to be consistent.
4. Hole-filling method: When making the profile, don't go to COPY SURFACE (recommended), just make some simple curved surfaces to block the holes. Sometimes the curved surface is not easy to do, and you can directly grow a piece. 0.01mm thick solid body, and then some simpler large parting surfaces can be separated.
5. Skirt method: For most shell products, it is recommended to use skirt to make parting surface, so that not only is easy to parting, but also the parting surface is more beautiful.
6.The parting surface method in the product: Sometimes it is very strange. The product that can not be separated by the parting surface in the mold section is replaced with the product section to make the parting surface, and then to the mold section It will be easier to split the molds. It is understood that many masters use this method for splitting.
7. Volume method: Sometimes it can also be done by directly making volume blocks, including making finished volume blocks and making several volume blocks at will, and then dividing and merging the volume blocks.
8. Adjust package method: In some cases, when the main parting surface is used for parting, it will be inseparable, but don't give up easily, try to change a parting surface (such as inserts, inserts or sliders) There will be surprises when you divide it.
9. Modification of the product method: This method is more useful for some graphics files that are converted with third-party software and some products with poor product surface quality. Some parts of the product can be modified appropriately, but Be careful not to change the appearance and functional parts of the product at will. You can also make a new PART and use data sharing to insert the physical surface of the original product. The disadvantage is that the mold file cannot be renewed and changed when the product is changed.
10. Scalper method: This is no way, but it is absolutely feasible, that is, for some products with poor product quality and simple mold structure, it is better to do it honestly instead of trying various methods to find clever tricks for parting. He once scalped and made each mold part directly using the curved surface on the product one by one.Of course, this kind of thing is really annoying, but once you encounter it and your computer is not good, the method can still be given to you. Bring convenience!