Memory module incompatibility problem

the reason

1. I bought counterfeit and shoddy memory sticks. The thickness of this kind of memory sticks does not fit well with the motherboard socket, resulting in a gap. The resulting voids are easy to enter dust. When the dust enters, it will cause poor contact between the memory bar and the motherboard and cause the host to make a hissing sound. This is one of the most important reasons for the neighing of the host.
2. The surface of the gold finger part of the counterfeit and shoddy memory stick is of poor quality where it contacts the motherboard card slot, which is prone to poor contact, causing the host to make a hissing sound.
3. Poor quality of the card slot can also cause such problems in the computer.
4. Mismatch between the computer motherboard and the memory module model

result

1. The software often runs errors, and the memory cannot be read.
2. System operation is unstable, and crashes or blue screens often occur.
3. In severe cases, the computer cannot be started, and a hissing sound will appear as soon as the computer is turned on.
4. The machine crashes irregularly after booting up.

Solution:
1. Aiming at the problem of poor contact: what is needed is a piece of rubber and hot melt glue.

First, we unplug the memory module from the motherboard, then wipe it clean with an eraser, and wipe the golden finger part intensively. In addition, we need to wipe the card slot clean, and then reinsert the memory module into the card slot with The hot melt glue fills the gap between the memory stick and the card slot, and finally waits for the hot melt glue to cool down. This method can solve most of the memory incompatibility problems caused by poor contact. If this method does not solve the problem, it is because the quality of the memory module or the motherboard card slot you purchased is too poor. At this time, it is not enough to just repair it. You need to spend money to buy a new memory module. If this method works and the problem occurs again after a period of time, then we can repeat the above operation.

2. Incompatibility

I bought a new memory stick. When buying a new memory module, you must tell the merchant the model of the host and motherboard to prevent you from buying the wrong one again.

---

Others:
Insert two memory sticks, one original and one new.
If the memory sticks are determined to be intact, then the memory sticks are not compatible.

The detection method is as follows:
Try to install only one memory to the motherboard, and the fault disappears. The memory is not compatible. If the fault persists, it is the motherboard memory slot problem.