VMware NSX-T 3.0 configure DHCP for subnet

On VMware's official website, you can view the segment-based DHCP configuration method:

Configure DHCP on the segment

Follow the instructions on the official website to configure DHCP for segments on NSX-T 3.0:

1. Configure DHCP configuration file
   Network->IP management->DHCP->Add DHCP configuration file
   
   Note: Here you need to define the DHCP type as server and specify the ip address.

2. Configure DHCP on the segment
   2.1 Select the segment and click Edit
   2.2 Add subnet, here fill in the gateway address/mask of the subnet
   
   2.3 Edit settings DHCP configuration
   
   2.3.1 Select the DHCP configuration file
   2.3.2 configured in the first step Fill in the server IP address set in the DHCP configuration file in the DHCP server address.
   2.3.3 Set the DHCP address range
   2.3.4 Set the DNS server, etc.

2.4 Save the configuration, take effect immediately