With the progress of society, many factories now use cnc. What should be considered when cnc processing centers are in operation? Let me tell you about it below.
There are 4 points to consider when operating a cnc machining center!
1. The natural environment regulations of the processing center
The location of the machining center should be free of vibration sources, and should be prevented from the hazards of direct sunlight and radiant heat, and to prevent the hazards of dampness and cyclones. If there are vibration sources around the CNC lathe, vibration isolation trenches should be set around the CNC lathe.
Two, switching power supply regulations
The working voltage of the switching power supply must be strictly controlled where the machining center is installed. The fluctuation of the operating voltage of the switching power supply must be within the allowable range and remain stable.
Three, temperature standards
Generally speaking, exhaust fans or industrial air coolers are installed inside the electrical control cabinet of CNC machine tools to maintain electronic components. Excessive temperature and environmental humidity will reduce the service life of automatic control system components and increase common failures.
Fourth, apply CNC lathes as required
When using a CNC lathe, it is not allowed to change the main parameters set by the manufacturer in the automatic control system. The marked values of the main parameters can be adjusted according to the specific conditions, not to mention the machine accessories can not be dismantled and replaced.
The above is what you should pay attention to and consider when operating cnc processing, I hope it can help everyone.