LINUX smart TV TV box embedded hardware network port pressure test pressure test
Use the iperf3 test tool to perform this test:
1. Use Mobaxterm software to upload the iperf3 test script to any path in Linux and add executable permissions;
2. Install iperf3.exe on the Windows side (do not click exe to run it Has any effect), but in the blank space of the folder where the program file is located, hold down the shift key of the keyboard and click the right mouse button at the same time, choose to open the PowerShell window here, and execute (.iperf3 -s));
3.ARM The hardware platform side executes (iperf3 -c XX.XX.XX.XX -i 1 -w 1M -t 60). During the test, the PC side uses the IP of Mobaxterm software Ping OS, and the archive path is set;
4. Perform network port pressure Test 24H (normal temperature);
5. Use iperf3 to test the C/S mode of the device network port pressure test. The test coverage should be performed. After the 24H test at room temperature, execute the (ifconfig -a) command on the device to confirm that the test network port pressure test has no errors;