What motherboard is good for i5-10400F
The motherboards that Intel’s tenth generation processors are compatible with and listed simultaneously are the 400 series motherboards. In the intel 400 series, there are Z490, H470, B460 and the entry-level H410 chipset. These motherboards are equipped with LGA 1200 sockets, so they can all be Support and best compatibility with i5-10400 and i5-10400F processors, but which one is the best match?
Among them, the H410 positioning entry-level motherboard can basically be ruled out, but the budget is very tight and can be considered. After all, the motherboard has little effect on performance, and the H470 motherboard with a relatively awkward positioning is basically a product that is ignored by the market, and Z490 supports overclocking Generally, it is matched with the tenth-generation processor with CPU model suffix K to support overclocking. At the same time, the price of the motherboard is relatively expensive. For the i5-10400 and i5-10400F CPUs that do not support overclocking, it is completely unnecessary. The B460 is positioned at the mainstream level, so the mainstream The best match for the i5-10400 and i5-10400F processors is the B460 motherboard.
What graphics card is most suitable for i510400f
The performance of i5 10400f's energy consumption ratio is still very good. There are many motherboard models to choose from, and the h410, b460, z490, and h470 chipsets can all be lit.
(1) The mainstream choice is generally b460, and the basic power supply of b460 from the three major factories can meet 10400f. If there is a need for CPU upgrades in the future, such as upgrading 10700f and 10900f, you can choose the MSI B460M mortar, which can enter the bios to unlock the power consumption and drive the 10-core power supply demand.
(2) In pursuit of the ultimate cost performance, you can choose H410. As the entry-level motherboard of the 10th generation Core, some H410s are still very cost-effective. After all, 10400f cannot be overclocked. It is not that the higher the power supply, the better, but the power supply is enough. So if I don't plan to change the CPU in the future, I recommend using H410 with 10400f directly. Note that some H410s do not support nvme hard drives, so please check whether the motherboard has M.2 interface or not. m.2 interface MSI H410M-A PRO
(3) H470, which has no sense of existence, has unclear positioning, high or low, small shipments, and few people. The one worth buying is ASRock’s ITX, and friends who are interested in setting up a mini host can consider it.
(4) If you want the memory overclocking selection board Z490, the motherboards of the first three chipsets do not support memory overclocking, only the Z series. This can be regarded as a characteristic of toothpaste factories, and memory overclocking must be cut. The reason for emphasizing the "Beggar" board is that all Z490 motherboards are expensive, and most boards are more expensive than 10400f. Therefore, it is good to choose a super memory board to satisfy XMP overclocking.