Q: When all keys are lost, which key programmer can add smart keys to Toyota INNOVA CRYSTA or Fortuner?
Answer: XTOOL X100 PAD3 is a good choice.
Xtool X100 PAD3 (X100 PAD Elite) is a professional tablet key programmer, which not only provides key programming for customers, but also provides 16 special functions. With the KS-1 key simulator, it can support all keys lost in Toyota/Lexus/VW/BMW key programming by 2020.
Guidelines for adding new keys to Toyota INNOVA CRYSTA/Fortuner:
1. Connection:
->>Connect the X100 PAD3 tablet and the car's OBD port through the main cable and OBDII-16 adapter (or other related interfaces)
->>Connect the X100 PAD Elite and KC100 through the USB cable
2. Operation:
Turn on the ignition switch, and then follow the steps below to enter the software:
select "Immobilization" -> "TOYOTA"
Agree to the disclaimer and
select "All smart key lost" -> "Read Immobilizer data"
Press the start button to
enter the file name to save the read immobilizer data
Successfully back up EEPROM data
Generate the simulation key to
ensure that the X100 PAD Elite is properly connected to the network.
Selecting the backup immobilizer file
will display the current key type.
Getting "calculation result"...
Activating KC100...
Checking version information...
Insert the simulated smart key into the KC100 adapter
Successfully generated simulation key
Put KC01 on the start button and press 4 times to
select "Add key"
Please note:
This program supports 94, 98, 88, A8, A9, 39 smart card generation. Some old models (such as ore-2010 Relz) have a smart card type of 94. Please select the [Smart Key system] menu to program the smart key. Some models cannot read the anti-theft lock data after 2010 and are temporarily not supported.
Connect the generated Toyota KS-1 simulator smart key to the start button until you hear a beep, and then place the key on the start button.
Successfully programmed the new key
Read more:
XTOOL X100 PAD3 Key Programmer, Any Good?
Xtool X100 Pad3 Activation, Update, Using Tips
Program Toyota All Keys Lost: XTOOL X100 PAD3 or Autel IM608/ IM508?