MediaTek MTK6762 Helio P22 core board specifications
MTK6762 is a 4G full Netcom Android smart module with high performance and low power consumption. This module supports 26/3G/46 mobile, China Unicom, telecommunications and other network standards, and supports LTE Cat-7 high-speed network. It is an intelligent wireless communication module for the global market TDD-LTE/ FDD-LTE/WCDMA/TD-SCDMA/EVDO/CDMA/GSM network standard.
The MTK6762 module uses 12nm process eight-core Cortex-A53, the highest frequency 2.0GHz processor, onboard memory is 1GB+8GB (2GB+16GB, 3GB+32GB, 4GB+64GB), equipped with Android9.0 operating system. Support 2.4G/5G dual-band WiFi, Bluetooth 5.0, GNSS (GPS/Beidou/Glonass), power management, charging and discharging, audio and video codec, etc. Provides rich data interfaces, including LCM, Touch, Camera*3, USB, UART, I2C, SPI, I2S, ADC, Keypad, GPIOs, etc. A variety of modules can be connected, including 3D face recognition module, NFC, one-dimensional and two-dimensional scanning, RFID, fingerprint, swipe card, security encryption, identity recognition, high frequency UHF module, infrared, Ethernet, vehicle radar, OBD, etc. ,
The size of MTK6762 module is 38.5mm*52.5mm*2.85mm, which is suitable for all kinds of products with higher structural size requirements. Products are widely used in 4G audio and video transmission, smart handheld terminals, smart vehicle equipment, machine vision and robots, smart information collection equipment, smart PoS cash registers, security monitoring, industry tablets, medical and industrial equipment, and other industry application designs, etc. field.
Product Features
Processor: Mediatek Helio P22 (MT6762) 12nm process eight-core Coretex-A53 (64bit) up to 20GHz
GPU:IMG GE8320 @650MHZ
Memory: 1GB LPDDR3 (Optional 2G/3G/4G)
8G eMMC (Optional 16G/32G/64G)
network frequency band:
LTE Cat-7, supports global mainstream frequency bands, the default domestic frequency band*
2G GSM:850/900/1800/1900MHz
2G / 3G EVDO / CDMA: BCO
3G TD-SCDMA: B34 / B39
3G WCDMA: B1/ B2/B5(B6)/B8
4G TDD-LTE Band: B38/B39/B40/B41
4G FDD-LTE Band: B1(B4)/B2/B3/B5(B19)/B7/B8/B20(B12/B17)
wireless connection:
WIFI: Dual frequency (2.4/5GHZ) support 802.11 a/b/g/n/ac, support AP hotspot
BT:Bluetooth 5.0
GNSS: GPS/Beidou/Glonass/ Galileo/QZSS, support A-GPS
FM: Support FM Radio
Display interface:
Interface type: MIPI DSI 4 lane x1 LCM
Maximum resolution: HD+ (1600*720) 60fps
Support 1-100 inch display, expandable RGB/LVDS/EDP/HDM interface
/*Power management:
High performance and low power consumption, can support fast charging technology
Display:
Interface:Reserve MIPI CSI 8 lane LCM
Resolution: Support up to WQHD (2560+1440)/FHD (1920*1080)/HD, etc.
LCM size: unlimited*/
Camera interface:
Interface type: MIPI CSI 4 lane x3 Camera
Video encoder:
Support 3 cameras, up to 21MP@30fps
Support HW Dual CAM dual camera dual recording functionVideo
decoding: 1080P @30FPS, H.264/H.265
Video encoding: 1080P @30FPS, H.264
audio port:
Speaker*2
Microphone*2
earpiece
headset
Io interface:
l2S*1
UART*2, the highest rate is 961200bps
l2C*7, the rate is 100K/400K/3.4Mbps (DMA)
SPI*3
PWM*5 EINT
*14
ADC*1
Keypads (user can customize)
GPIOs several (IO pins can be Multiplexing)
SDIO interface:
One SD card interface, support hot swap
SIM card interface :
Support dual SIM card, dual card dual standby
USB interface:
USB2.0, the highest rate is 480Mbps,
support USB (OTG)
Antenna interface:
LTE_MAIN main antenna, LTE_DRX diversity antenna
WiFi/BT/GNSS antenna, GNSS independent antenna
Power management:
Built-in power management IC, support charge and discharge
operating system:
Android 9.0
Physical characteristics:
Size 38.5*52.5*2.85mm
172pin LCC+22pin (very useful) LGA
working environment:
Input voltage 3.5V~4.2V
Working temperature: -20°C~+70°C
Supporting development board or bottom plate work
ZM65B (MTK6762) module size specification is: 38.5mm *52.5mm*2.85mm, the physical picture is as follows:
For more information and related solutions, please consult Smart Things Communication