Foreword: I hope that when you finish watching, you can have a new understanding of the No. 9 electric car.
1. Full vehicle OTA function (motor controller + ECU + instrument + battery)
The car has a 2G IoT module and Bluetooth, so it supports two kinds of OTA, and regularly updates the firmware, which brings you unexpected functions and optimizes some users' complaints.
(1) Bluetooth OTA
(2) Internet of Things module OTA
2. Electric seat bucket
Because most models are lithium batteries, the seat bucket can be opened electrically. It is also worth mentioning that the seat lock can still be opened when the main battery is not present.
(1) Bluetooth open seat barrel
(2) Swipe card open seat barrel
Three, electric faucet lock
It automatically unlocks the faucet when it is turned on, and automatically locks the faucet when it is turned off. There is no need for extra operations, such as special locking of the car.
Four, APP check the remaining battery
The C series of the No. 9 electric car is all lithium batteries, and the remaining power is calculated by the battery BMS. The B series B30C is a lead-acid car, but the lead-acid car is still equipped with a lead-acid metering board, so the No. 9 electric car is relatively traditional electric One of the highlights of the car is that the power calculation is more accurate. Unlike traditional electric vehicles, which only rely on rough collection of voltage to calculate the power, it is completely inaccurate. For example, when I go up a slope, the power may decrease, and the power may increase when I go downhill. The electric power of the No. 9 electric car is as much as it is, and it will not change with how much the throttle is turned.
Five, APP to check remaining mileage
This mileage is calculated by self-learning based on battery power and past riding habits and riding records, etc., which is relatively accurate.
Six, APP view cycling records
The following information can be viewed in the riding record, and the riding track can also be played, supporting double-speed playback
Seven, help promote
The push mode can be used when there is no electricity or a puncture, which is convenient and labor-saving.
8. Side support detection
It can prevent the phenomenon such as passing the car from happening, and the temple must be put away to meet the riding conditions.
Nine, seat cushion detection
Control the P gear together with the temple. The temple must be folded and the seat cushion must be seated to release the P gear to meet the riding conditions. Of course, these two detection items can also be disabled through the APP.
10. NFC swipe card switch machine
Say goodbye to traditional mechanical keys, push the grid high, and copy the NFC card to mobile phones, watches, bracelets and the like.
Eleven, password boot
Like a password lock, you can enter a password to switch the machine.
12. 2G remote switch
As long as there is a 2G network, the vehicle can be switched on and off normally. There are very good application scenarios. For example, I took the car to the subway station today, and then went back from get off work. Others want to ride this car. At this time, there is no key, and I don’t want to tell him the password to switch the machine. I can use 2G remote Turn the machine on and off to turn it on once, or turn it off.
13. Automatically lock the car
Put down the temple and do not sit on the seat cushion, it can automatically shut down, and the automatic shutdown time is adjustable from 1 to 10S.
14. Automatic photosensitive headlights
The headlights are automatically turned on and off according to changes in light and darkness, or they can be turned on and off manually through the APP.
15. APP to find a car
Send a car search command through the 2G Internet of Things module and click in the APP to make the vehicle's handlebar light flash red and green, and the sound will turn on.
16. Location sharing
You can share the real-time location of the vehicle in the APP. The time can be 1H, 2H, etc. There is a very good application scenario. I want to ride home at this time. I tell my parents that I have gone back by bike, and then set the location. Share it out. At this time, mom and dad only know that I am on the way home and do not know where I am. They can check the real-time location through this sharing and know where I am.
Seventeen, start with a fart
After the Bluetooth of the mobile phone is automatically connected, it can be turned on with one butt, which is very science fiction.
18. Constant speed cruise
It can cruise at a fixed speed automatically or manually.
19. The battery supports the upper limit percentage setting of power-on
If you are not traveling far, you can set to charge the battery only to 95% to increase battery life.
Twenty, the car crashes automatically call
If you crash during riding, the vehicle will automatically detect the emergency contact number for you.
21. Vehicle notifications can be pushed to WeChat
Any notifications, including alarm notifications and other information prompts can be pushed to WeChat.
Twenty-two, with charging reminder
Reminders such as charging start and charging stop.
Twenty-three, electronic fence
When the vehicle is locked and the vehicle is positioned beyond a certain distance, the electronic fence will be launched.
Twenty-four, RideyGO!
It is automatically unlocked when getting in the car, and automatically shut down when getting off the car. In fact, it is a combination of a fart start or close unlock and automatic shutdown function.
Twenty-five, Bluetooth is close to unlock
The mobile phone is close to the vehicle and automatically connects to Bluetooth to unlock more authorizations, such as turning on the phone, opening the bucket, and so on.
There are too many functions, and there are many details. Let’s change it slowly. I have the opportunity to list some main functions, write them separately, explain them separately, and introduce them separately...