The main contents of this paper to NJGB As science and technology, thanks NJGB technology.
1 IAR Embedded Workbench for 8051 8.10.1
installation file: ". 2014-8-1-NJZBcc2530 \ 1 Software Tools \ CD-EW8051-810"
Keygen: ". 2014-8-1-NJZBcc2530 \ 1 Software Tools \ IAR_KeyGen"
You must select the version 8.10.1
2 installation zigbee protocol stack ---- zstack-251a
installation file: ". 2014-8-1-NJZBcc2530 \ 1 software tools \ ZStack-CC2530-2.5.1a"
3 smartrf programmer software installation
.hex burning tools in this software, the name Programmer Flash
4 to install the driver
4.1 emulator driver installation
drive in the directory: "... \ IAR Systems \ Embedded Workbench 6.0 \ 8051 \ drivers \ Texas Instruments"
name: Chipcon SRF04EB ( the SmartRF04EB)
4.2 usb serial driver mounted
drive directory: "2014-8-1-NJZBcc2530 \ 1 software tools \ HL-340 uSB to serial drive."
the uSB-CH340 the sERIAL, Baudrate: 9600, Flow Control NO
. 5 JLX12864
- Interface the SPI
- internal integration GRAM
- 12864表示分辨率是128 x 64，类似于Nokia5110，只是模块额外集成了一个SPI接口的字库
6 Abbreviation
CC2530: Chipcon，现已被TI收购
USB BH reset：Bigger Hammer or Brad Hosler，表示warm reset；you may be confused why the USB 3.0 spec calls the same type of reset "warm reset" in some places and "BH reset" in other places. "BH" reset is supposed to stand for "Big Hammer" reset, but it also stands for "Brad Hosler". Brad died shortly after the USB 3.0 bus specification was started, and they decided to name the reset after him. The suggestion was made shortly before the spec was finalized, so the wording is a bit inconsistent.
