How to solve the black screen when Ubuntu starts, nvidia driver issue can not - Lenovo Y7000 Ubuntu installation guide to avoid the pit. (Rational use graphical interface)
Ubuntu graphics driver problem --Y7000 avoid pit Guide
- This Y7000 I install Ubuntu, not only the card, graphics card problems.
- This articleSubstantially free of command operations,simple and clear.
- This article from the blog "from the BIOS update to the underlying hard disk configuration to Window10 & Ubuntu dual system" is a part of him, because the solution to this problem as part of an independent, I will be his alone written. If you have interest in the original text, click here
Installation Ubuntu18.04.4
U disk boot Ubuntu U disk, and then press it in this interface e, note it, otherwise it will be fun. (Grub bottom prompted)
then enter this interface
to modify the three - instead nomodeset. (What about the suggestion to move the cursor point press down around there will be a lot of fun things ) (nomodeset: meaning is not loaded hardware)
After pressing the F10 boot normally.
As before installation.
Installation ividia graphics driver (GUI, no command)
The first step first hit the face. . .
The point in time when entering grub ethen enter this interface, the red part removed. (Long press the backspace will be very magical, do not try)
will be changed after ro nouveau.modeset=0
press F10 to start properly.
WiFi can see normal, and we even put it on.
Access to all the program, this change point source.
Generally the top right point that the option to automatically find the fastest source. Select the server.
Click Close, then click reload.
Update pre-installed graphics driver about other drivers.
- Two lines of command to update the package (you can skip two commands)
sudo apt-get update
sudo apt-get upgrade - After this update finished, click on this to update.
(Of course, this can also click to update.)
Click to restart later.
Ubuntu software found in all programs.
Click on the additional drive, a little while.
Then, as found video drivers, and then click Apply Changes.
After restarting.
In the grub would not go from press e, and everything is normal, it's done.
