storagenode0.2.3 配置
storagenode初始化
如果存储节点已初始化，请忽略此步骤
./storagenode init
修改配置文件
初始化storagenode后，默认生成配置文件~/.lambda_storage/config/config.toml
- 如已备份旧版storagenode配置文件，可使用旧文件覆盖新的，然后使用
storagenode upgrade命令升级即可
\cp -rf ~/lambda_bak/storage_config.toml ~/.lambda_storage/config/config.toml
./storagenode upgrade
- 如未部署过storagenode，需参考如下说明手动修改配置文件
vi ~/.lambda_storage/config/config.toml
####
## Not used in v0.2.3, will be removed after v0.2.3
version = "0.2.3"
commit = "20b8847d14a32481e64bae8617abbe7b55cac45b"
mode = "release"
####
[build]
version = "0.2.3"
commit = "20b8847d14a32481e64bae8617abbe7b55cac45b"
mode = "release"
# 服务需要监听的地址
# 以本机内网IP为 192.168.10.20，端口映射的外网IP为 200.200.200.200 为例
[server]
# 对外提供服务的地址，推荐配置为内网地址做端口映射到外网IP
address = "192.168.10.20:14000"
# 对内提供服务的地址，主要是给StorageNode使用，推荐配置为内网地址
private_address = "192.168.10.20:14001"
debug_log_traffic = "false"
[kad]
# address you want kad to connect with
# DHT接入节点地址，可以是自己质押的验证节点或minernode配置的kad.external_address，这里以 47.94.129.97:13000 为例
# 可选官方dht地址：39.105.148.217:13000/47.94.129.97:13000/47.93.196.236:13000/182.92.66.63:13000
bootstrap_addr = ["47.94.129.97:13000"]
# time you would wait to connect dht seed node
bootstrap_backoff_max = "30s"
bootstrap_backoff_base = "1s"
db_path = "/root/.lambda_storage/kademlia"
# this should listen at Public IP
external_address = "200.200.200.200:14000"
alpha = 3
[kad.routing_table_config]
bucket_size = 20
replacement_cache_size = 5
[log]
level = "info"
output_file = "stdout"
[storage]
## 用于生成apikey的种子内容，不能为空
root_secret_seed = "fasdf"
## 存储节点的名字，需要在矿池内部唯一，即连接同一矿工的多个storagenode的storage_name不能重复
storage_name = "machine1"
## minernode对内提供服务的地址，即它的server.private_address
miner_address = "192.168.10.10:13001"
## 记录文件位置的数据库
db_path = "/root/.lambda_storage/storagedb"
## 存储路径，可填写多个以逗号隔开
data_dir = ["/root/.lambda_storage/store"]
[mining]
## 挖矿记录的数据文件
db_path = "/root/.lambda_storage/statementdb"
## 存储挖矿文件(删除的)的存储路径，可填写多个以逗号隔开
mining_dir = [ "/root/.lambda_storage/mining"]
启动storagenode
启动storagenode
./storagenode run --daemonize --log.file [log_file_path]
说明：
--daemonize以后台方式启动
--log.file [log_file_path] 指定storagenode运行日志路径，不添加参数则无日志输出
可添加--log.level debug参数，日志开启debug可查看更详细日志输出，不添加此参数则默认输出INFO级别日志
查看storagenode进程
./storagenode run --status
返回结果如下即为正常运行：
storagenode.pid is running, pid is 19505
停止storagenode
./storagenode run --stop
返回结果如下即停止成功：
stop daemon process from storagenode.pid:19505 successfully
备份和恢复存储文件
以防配置文件丢失，请提前做好文件备份：存储网络文件备份
