Linux网络编程——TCP和UDP通信

其他 2019-05-02 23:01:24 阅读次数: 0
  • TCP协议流程图、TCP建立即时聊天
  • TCP即时聊天升级：服务器在客户端断开后不断开，客户端可以多次重连服务器进行即时聊天
  • UDP协议流程图、UDP建立即时连接
  • 如果在已经处于 ESTABLISHED状态下的socket(一般由端口号和标志符区分）需调用closesocket（一般不会立即关闭而经历TIME_WAIT的过程）后想继续重用该socket，但也可以直接用setsockopt和reuse。
  • SO_RCVLOWAT设置接收缓冲区下限

1、TCP协议的流程图

服务端：socket---bind---listen---while(1){---accept---recv---send---close---}---close
客户端：socket----------------------------------connect---send---recv-----------------close

1556806258606

TCP建立即时聊天

tcp_client.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd=socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd,-1,"socket");
    struct sockaddr_in ser;
    bzero(&ser,sizeof(ser));
    ser.sin_family=AF_INET;
    ser.sin_port=htons(atoi(argv[2]));
    ser.sin_addr.s_addr=inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret=connect(socketFd,(struct sockaddr*)&ser,sizeof(ser));
    ERROR_CHECK(ret, -1, "connect");
    printf("connect success\n");
    char buf[128]={0};
    fd_set rdset;
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(socketFd, &rdset);
        ret = select(socketFd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(socketFd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(socketFd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            ret = send(socketFd, buf ,strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(socketFd);
}

tcp_server.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(new_fd, -1, "accept");
    printf("client ip=%s, port=%d\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    char buf[128] = {0};
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(new_fd, &rdset);
        ret = select(new_fd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(new_fd);
    close(socketFd);
    return 0;
}

2、TCP即时聊天升级：服务器在客户端断开后不断开，客户端可以多次重连服务器进行即时聊天

tcp_server.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    char buf[128] = {0};
    fd_set rdset; 
    fd_set needMonitorSet; //需要监听的描述符集合
    FD_ZERO(&needMonitorSet);  
    FD_SET(STDIN_FILENO, &needMonitorSet);
    FD_SET(socketFd, &needMonitorSet);
    while(1){
        memcpy(&rdset, &needMonitorSet, sizeof(fd_set));
        ret = select(11, &rdset, NULL, NULL, NULL); //设最大监控描述符为10
        if(FD_ISSET(socketFd, &rdset)){ //如果监听到客户端则accept接受远程计算机的连接请求
            new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen); //accept函数接受一个连接时，会返回一个新的socket标识符，以后数据的数据传输和读取就要通过这个新的socket编号来处理，原来的socket继续监听其他客户机的连接请求。
            ERROR_CHECK(new_fd, -1, "accept");
            printf("client ip=%s, port=%d\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
            FD_SET(new_fd, &needMonitorSet);    
        }
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\n");
                FD_CLR(new_fd, &needMonitorSet);  //从needMonitorSet中删除new_fd
                close(new_fd);
                continue;
            }
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(socketFd);
    return 0;
}

tcp_client.c和1同

3、使用UDP协议的流程图

服务端：socket---bind---recvfrom---sendto---close
客户端：socket----------sendto---recvfrom---close

1556806183309

  • sendto()函数原型：
    int sendto(int sockfd, const void msg,int len,unsigned int flags,const struct sockaddr to, int tolen);

    该函数比send()函数多了两个参数，to表示目地机的IP地址和端口号信息，而tolen常常被赋值为sizeof (struct sockaddr)。sendto 函数也返回实际发送的数据字节长度或在出现发送错误时返回-1。

  • recvfrom()函数原型：

    **int recvfrom(int sockfd,void buf,int len,unsigned int flags,struct sockaddr from,int *fromlen);**
    from是一个struct sockaddr类型的变量，该变量保存连接机的IP地址及端口号。fromlen常置为sizeof (struct sockaddr)。当recvfrom()返回时，fromlen包含实际存入from中的数据字节数。Recvfrom()函数返回接收到的字节数或当出现错误时返回-1，并置相应的errno。

    UDP传输一个数据报示例：

    udp_server.c

#include <func.h>

int main(int argc, char **argv){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser,sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    char buf[128] = {0};
    struct sockaddr_in client;
    int addrlen = sizeof(client);
    ret = recvfrom(socketFd, buf, 5, 0, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(ret, -1, "recvfrom");
    printf("client ip = %s, port = %d\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    printf("udp server gets %s\n", buf);
    //bzero(buf, sizeof(buf));
    //ret = recvfrom(socketFd, buf, 5, 0, (struct sockaddr*)&client, &addrlen);
    //ERROR_CHECK(ret, -1, "recvfrom");
    //printf("udp server gets %s\n", buf);
    ret = sendto(socketFd, "world", 5, 0, (struct sockaddr*)&client, sizeof(client));
    ERROR_CHECK(ret, -1, "sendto");
    close(socketFd);
    return 0;
}

udp_client.c

#include <func.h>

int main(int argc, char *argv[]){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);
    int ret;
    ret = sendto(socketFd, "helloworld", 10, 0, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "sendto");
    char buf[128] = {0};
    ret = recvfrom(socketFd, buf, sizeof(buf), 0, NULL, NULL);
    ERROR_CHECK(ret, -1, "recvfrom");
    printf("udp client gets %s\n", buf);
    close(socketFd);
    return 0;
}

4、使用UDP协议建立即时连接

udp_server.c

#include <func.h>

int main(int argc, char **argv){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser,sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    char buf[128] = {0};
    struct sockaddr_in client;
    int addrlen = sizeof(client);
    printf("client ip = %s, port = %d\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(socketFd, &rdset);
        ret = select(socketFd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(socketFd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recvfrom(socketFd, buf, sizeof(buf), 0, (struct sockaddr*)&client, &addrlen);
            ERROR_CHECK(ret, -1, "recvfrom");
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            bzero(buf, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(0 == ret){
                printf("byeybye\n");
                break;
            }
            ret = sendto(socketFd, buf, strlen(buf) - 1, 0, (struct sockaddr*)&client, sizeof(client));
            ERROR_CHECK(ret, -1, "sendto");
        }
    }
    close(socketFd);
    return 0;
}

udp_client.c

#include <func.h>

int main(int argc, char *argv[]){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);
    int ret;
    char buf[128] = {0};
    fd_set rdset;
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(socketFd, &rdset);
        ret = select(socketFd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(socketFd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recvfrom(socketFd, buf, sizeof(buf), 0, NULL, NULL);
            ERROR_CHECK(ret, -1, "recvfrom");
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            bzero(buf, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(0 == ret){
                printf("byeybye\n");
                break;
            }
            ret = sendto(socketFd, buf, strlen(buf) - 1, 0, (struct sockaddr*)&ser, sizeof(ser));
            ERROR_CHECK(ret, -1, "sendto");
        }
    }
    close(socketFd);
    return 0;
}

5、如果在已经处于 ESTABLISHED状态下的socket(一般由端口号和标志符区分）需调用closesocket（一般不会立即关闭而经历TIME_WAIT的过程）后想继续重用该socket，但也可以直接用setsockopt和reuse。

int reuse=1;
setsockopt(s,SOL_SOCKET ,SO_REUSEADDR,(const char*)&reuse,sizeof(int));

tcp_server.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    int ret;
    int reuse = 1;
    ret = setsockopt(socketFd, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof(int));
    ERROR_CHECK(ret, -1, "setsockopt");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(new_fd, -1, "accept");
    printf("client ip=%s, port=%d\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    char buf[128] = {0};
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(new_fd, &rdset);
        ret = select(new_fd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(new_fd);
    close(socketFd);
    return 0;
}

tcp_client.c和1同

6、SO_RCVLOWAT：接收缓冲区下限

tcp_server_rcvlowat.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    int ret;
    int reuse = 1;
    ret = setsockopt(socketFd, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof(int));
    ERROR_CHECK(ret, -1, "setsockopt");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(new_fd, -1, "accept");
    printf("client ip=%s, port=%d\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    char buf[128] = {0};
    int rcvLowAt = 10;
    ret=setsockopt(new_fd,SOL_SOCKET,SO_RCVLOWAT,&rcvLowAt,sizeof(int));

    ERROR_CHECK(ret, -1, "setsockopt");
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(new_fd, &rdset);
        ret = select(new_fd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            printf("%s\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(new_fd);
    close(socketFd);
    return 0;
}

tcp_client.c和1同

猜你喜欢

转载自www.cnblogs.com/Mered1th/p/10803634.html
今日推荐
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
LFOSSA 源来如此公开课 | 掌握云原生未来：CNCF 认证全面攻略与备考秘籍
国产云输入法——仅华为无云端数据上传安全问题
开源日报 | 工业开源项目OGG 1.0；姐姐，你要和我一起配置火狐吗；苹果AI遥遥落后？Fedora 40
开放签电子签章：停止新增，优化体验，前进更进（五一假期前工作）
周排行
Metasploit文件目录与入侵基本概念
跨域(CORS)请求问题[No 'Access-Control-Allow-Origin' header is present on the requested resource]常见解决方案
CodeIgniter 源码解读之 CodeIgniter.php（二）
SAS入门之（四）改变数据类型
初识元组
[数学建模]数学建模算法和模型（B站视频）（二）
Nginx 服务器源码安装配置流程
C#实现语音视频录制 【基于MCapture + MFile】
开发进度4
下载安装vue的方法网址
每日归档
更多
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)
2024-04-23(26)
2024-04-22(39)
2024-04-21(0)
2024-04-20(6)
2024-04-19(5)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022