LearnOpenGL-笔记-其四

物联网 2025-04-21 18:29
0 阅读

上一篇笔记中结束了材质的内容，现在让我们进入新的部分：

光照贴图

光照贴图的概念其实非常简单，简单地说，我们希望不同的材质拥有不同的光照属性，所以不同的材质要应用不用的光照贴图，最常见的有我们的漫反射贴图和镜面反射贴图。

我们将纹理作为材质结构体的一部分，修改后的片元着色器定义如下：

#version 330 core
out vec4 FragColor;

struct Material {
    sampler2D diffuse;
    sampler2D specular;    
    float shininess;
}; 

struct Light {
    vec3 position;

    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
};

in vec3 FragPos;  
in vec3 Normal;  
in vec2 TexCoords;
  
uniform vec3 viewPos;
uniform Material material;
uniform Light light;

void main()
{
    // ambient
    vec3 ambient = light.ambient * texture(material.diffuse, TexCoords).rgb;
  	
    // diffuse 
    vec3 norm = normalize(Normal);
    vec3 lightDir = normalize(light.position - FragPos);
    float diff = max(dot(norm, lightDir), 0.0);
    vec3 diffuse = light.diffuse * diff * texture(material.diffuse, TexCoords).rgb;  
    
    // specular
    vec3 viewDir = normalize(viewPos - FragPos);
    vec3 reflectDir = reflect(-lightDir, norm);  
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    vec3 specular = light.specular * spec * texture(material.specular, TexCoords).rgb;  
        
    vec3 result = ambient + diffuse + specular;
    FragColor = vec4(result, 1.0);
}

然后在渲染循环里我们写这样一段代码：

float currentFrame = static_cast<float>(glfwGetTime());
        deltaTime = currentFrame - lastFrame;
        lastFrame = currentFrame;

        // input
        // -----
        processInput(window);

        // render
        // ------
        glClearColor(0.1f, 0.1f, 0.1f, 1.0f);
        glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

        // be sure to activate shader when setting uniforms/drawing objects
        lightingShader.use();
        lightingShader.setVec3("light.position", lightPos);
        lightingShader.setVec3("viewPos", camera.Position);

        // light properties
        lightingShader.setVec3("light.ambient", 0.2f, 0.2f, 0.2f);
        lightingShader.setVec3("light.diffuse", 0.5f, 0.5f, 0.5f);
        lightingShader.setVec3("light.specular", 1.0f, 1.0f, 1.0f);

        // material properties
        lightingShader.setFloat("material.shininess", 64.0f);

        // view/projection transformations
        glm::mat4 projection = glm::perspective(glm::radians(camera.Zoom), (float)SCR_WIDTH / (float)SCR_HEIGHT, 0.1f, 100.0f);
        glm::mat4 view = camera.GetViewMatrix();
        lightingShader.setMat4("projection", projection);
        lightingShader.setMat4("view", view);

        // world transformation
        glm::mat4 model = glm::mat4(1.0f);
        lightingShader.setMat4("model", model);

        // bind diffuse map
        glActiveTexture(GL_TEXTURE0);
        glBindTexture(GL_TEXTURE_2D, diffuseMap);
        // bind specular map
        glActiveTexture(GL_TEXTURE1);
        glBindTexture(GL_TEXTURE_2D, specularMap);

        // render the cube
        glBindVertexArray(cubeVAO);
        glDrawArrays(GL_TRIANGLES, 0, 36);


        // also draw the lamp object
        lightCubeShader.use();
        lightCubeShader.setMat4("projection", projection);
        lightCubeShader.setMat4("view", view);
        model = glm::mat4(1.0f);
        model = glm::translate(model, lightPos);
        model = glm::scale(model, glm::vec3(0.2f)); // a smaller cube
        lightCubeShader.setMat4("model", model);

        glBindVertexArray(lightCubeVAO);
        glDrawArrays(GL_TRIANGLES, 0, 36);


        // glfw: swap buffers and poll IO events (keys pressed/released, mouse moved etc.)
        // -------------------------------------------------------------------------------
        glfwSwapBuffers(window);
        glfwPollEvents();

没有什么新东西其实，就是给着色器中定义的参数赋值，就能实现光照贴图的更新。

投光物

我们之前讨论的光源都是一个点光源，简单的光源非常方便我们进行整个光照过程的模拟和研究，但是在实际的环境中，一个理想化的点光源是可遇不可求的。在这个章节里除了点光源我们还要讨论的是一些别的光源如平行光和聚光。

当光源离我们无限远或者可以被近似认为无限远时那这个光源发出的光线就都是平行的，平行光非常好处理因为无论哪里的平行光的方向都是一致的。

在代码中也非常好修改，更准确地是在片元着色器中关于光照的计算，我们之前的着色器写法是这样的：

#version 330 core
out vec4 FragColor;

struct Material {
    sampler2D diffuse;
    sampler2D specular;    
    float shininess;
}; 

struct Light {
    vec3 position;

    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
};

in vec3 FragPos;  
in vec3 Normal;  
in vec2 TexCoords;
  
uniform vec3 viewPos;
uniform Material material;
uniform Light light;

void main()
{
    // ambient
    vec3 ambient = light.ambient * texture(material.diffuse, TexCoords).rgb;
  	
    // diffuse 
    vec3 norm = normalize(Normal);
    vec3 lightDir = normalize(light.position - FragPos);
    float diff = max(dot(norm, lightDir), 0.0);
    vec3 diffuse = light.diffuse * diff * texture(material.diffuse, TexCoords).rgb;  
    
    // specular
    vec3 viewDir = normalize(viewPos - FragPos);
    vec3 reflectDir = reflect(-lightDir, norm);  
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    vec3 specular = light.specular * spec * texture(material.specular, TexCoords).rgb;  
        
    vec3 result = ambient + diffuse + specular;
    FragColor = vec4(result, 1.0);
}

而对于平行光来说：
 

#version 330 core
out vec4 FragColor;

struct Material {
    sampler2D diffuse;
    sampler2D specular;    
    float shininess;
}; 

struct Light {
    //vec3 position;
    vec3 direction;

    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
};

in vec3 FragPos;  
in vec3 Normal;  
in vec2 TexCoords;
  
uniform vec3 viewPos;
uniform Material material;
uniform Light light;

void main()
{
    // ambient
    vec3 ambient = light.ambient * texture(material.diffuse, TexCoords).rgb;
  	
    // diffuse 
    vec3 norm = normalize(Normal);
    // vec3 lightDir = normalize(light.position - FragPos);
    vec3 lightDir = normalize(-light.direction);  
    float diff = max(dot(norm, lightDir), 0.0);
    vec3 diffuse = light.diffuse * diff * texture(material.diffuse, TexCoords).rgb;  
    
    // specular
    vec3 viewDir = normalize(viewPos - FragPos);
    vec3 reflectDir = reflect(-lightDir, norm);  
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    vec3 specular = light.specular * spec * texture(material.specular, TexCoords).rgb;  
        
    vec3 result = ambient + diffuse + specular;
    FragColor = vec4(result, 1.0);
}

之前针对点光源来说，我们需要的是点光源的位置，用点光源与片元的向量相减得到光线方向；而平行光我们直接给定方向向量即可。

结果如图：

虽然可能不是很明显，但其实还是能看出：在木箱们的正上方有一个光源且该光源作用在木箱上的效果都几乎一样。

对于点光源来说，除了我们之前说的基本的计算光线方向的部分，一般来说我们还需要给点光源一个衰减系数让他根据距离逐渐减小光照。

#version 330 core
out vec4 FragColor;

struct Material {
    sampler2D diffuse;
    sampler2D specular;    
    float shininess;
}; 

struct Light {
    vec3 position;  
  
    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
	
    float constant;
    float linear;
    float quadratic;
};

in vec3 FragPos;  
in vec3 Normal;  
in vec2 TexCoords;
  
uniform vec3 viewPos;
uniform Material material;
uniform Light light;

void main()
{
    // ambient
    vec3 ambient = light.ambient * texture(material.diffuse, TexCoords).rgb;
  	
    // diffuse 
    vec3 norm = normalize(Normal);
    vec3 lightDir = normalize(light.position - FragPos);
    float diff = max(dot(norm, lightDir), 0.0);
    vec3 diffuse = light.diffuse * diff * texture(material.diffuse, TexCoords).rgb;  
    
    // specular
    vec3 viewDir = normalize(viewPos - FragPos);
    vec3 reflectDir = reflect(-lightDir, norm);  
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    vec3 specular = light.specular * spec * texture(material.specular, TexCoords).rgb;  
    
    // attenuation
    float distance    = length(light.position - FragPos);
    float attenuation = 1.0 / (light.constant + light.linear * distance + light.quadratic * (distance * distance));    

    ambient  *= attenuation;  
    diffuse   *= attenuation;
    specular *= attenuation;   
        
    vec3 result = ambient + diffuse + specular;
    FragColor = vec4(result, 1.0);
}

可以看到我们的点光源的最后对冯模型中的三种光照都乘以了一个衰减系数，这个衰减系数总的来说由一个一次项一个二次项和一个常数项组成。

结果如图：

能够看到，距离较远的木箱的光照效果就非常普通，实现了随着距离增大而衰减的效果。

最后我们讨论的光源是聚光，聚光就是只在一定范围内的光，离开这个范围就不可见。

我们的手电筒的就是最好的聚光样例：

代码如下：

#version 330 core
out vec4 FragColor;

struct Material {
    sampler2D diffuse;
    sampler2D specular;    
    float shininess;
}; 

struct Light {
    vec3 position;  
    vec3 direction;
    float cutOff;
    float outerCutOff;
  
    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
	
    float constant;
    float linear;
    float quadratic;
};

in vec3 FragPos;  
in vec3 Normal;  
in vec2 TexCoords;
  
uniform vec3 viewPos;
uniform Material material;
uniform Light light;

void main()
{
    vec3 lightDir = normalize(light.position - FragPos);
    
    // check if lighting is inside the spotlight cone
    float theta = dot(lightDir, normalize(-light.direction)); 
    
    if(theta > light.cutOff) // remember that we're working with angles as cosines instead of degrees so a '>' is used.
    {    
        // ambient
        vec3 ambient = light.ambient * texture(material.diffuse, TexCoords).rgb;
        
        // diffuse 
        vec3 norm = normalize(Normal);
        float diff = max(dot(norm, lightDir), 0.0);
        vec3 diffuse = light.diffuse * diff * texture(material.diffuse, TexCoords).rgb;  
        
        // specular
        vec3 viewDir = normalize(viewPos - FragPos);
        vec3 reflectDir = reflect(-lightDir, norm);  
        float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
        vec3 specular = light.specular * spec * texture(material.specular, TexCoords).rgb;  
        
        // attenuation
        float distance    = length(light.position - FragPos);
        float attenuation = 1.0 / (light.constant + light.linear * distance + light.quadratic * (distance * distance));    

        // ambient  *= attenuation; // remove attenuation from ambient, as otherwise at large distances the light would be darker inside than outside the spotlight due the ambient term in the else branch
        diffuse   *= attenuation;
        specular *= attenuation;   
            
        vec3 result = ambient + diffuse + specular;
        FragColor = vec4(result, 1.0);
    }
    else 
    {
        // else, use ambient light so scene isn't completely dark outside the spotlight.
        FragColor = vec4(light.ambient * texture(material.diffuse, TexCoords).rgb, 1.0);
    }
}

没截进来的图里包含一个问题就是：为什么我们的theta比内切角大反而被判断在聚光里？因为其实这两个变量的本质是两个角度的余弦值，对于余弦函数，在九十度以内（你的内切角的范围只会在零到九十度），你的角度越小你的余弦值越大。

多光源

我们来将之前所有涉及到的内容，包括多种投光物，材质，光照贴图结合在一起，构建一个多光源场景。

我们来看看具体的代码里多了哪些东西，还是看我们的片元着色器：

#version 330 core
out vec4 FragColor;

struct Material {
    sampler2D diffuse;
    sampler2D specular;
    float shininess;
}; 

struct DirLight {
    vec3 direction;
	
    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
};

struct PointLight {
    vec3 position;
    
    float constant;
    float linear;
    float quadratic;
	
    vec3 ambient;
    vec3 diffuse;
    vec3 specular;
};

struct SpotLight {
    vec3 position;
    vec3 direction;
    float cutOff;
    float outerCutOff;
  
    float constant;
    float linear;
    float quadratic;
  
    vec3 ambient;
    vec3 diffuse;
    vec3 specular;       
};

#define NR_POINT_LIGHTS 4

in vec3 FragPos;
in vec3 Normal;
in vec2 TexCoords;

uniform vec3 viewPos;
uniform DirLight dirLight;
uniform PointLight pointLights[NR_POINT_LIGHTS];
uniform SpotLight spotLight;
uniform Material material;

// function prototypes
vec3 CalcDirLight(DirLight light, vec3 normal, vec3 viewDir);
vec3 CalcPointLight(PointLight light, vec3 normal, vec3 fragPos, vec3 viewDir);
vec3 CalcSpotLight(SpotLight light, vec3 normal, vec3 fragPos, vec3 viewDir);

void main()
{    
    // properties
    vec3 norm = normalize(Normal);
    vec3 viewDir = normalize(viewPos - FragPos);
    
    // == =====================================================
    // Our lighting is set up in 3 phases: directional, point lights and an optional flashlight
    // For each phase, a calculate function is defined that calculates the corresponding color
    // per lamp. In the main() function we take all the calculated colors and sum them up for
    // this fragment's final color.
    // == =====================================================
    // phase 1: directional lighting
    vec3 result = CalcDirLight(dirLight, norm, viewDir);
    // phase 2: point lights
    for(int i = 0; i < NR_POINT_LIGHTS; i++)
        result += CalcPointLight(pointLights[i], norm, FragPos, viewDir);    
    // phase 3: spot light
    result += CalcSpotLight(spotLight, norm, FragPos, viewDir);    
    
    FragColor = vec4(result, 1.0);
}

// calculates the color when using a directional light.
vec3 CalcDirLight(DirLight light, vec3 normal, vec3 viewDir)
{
    vec3 lightDir = normalize(-light.direction);
    // diffuse shading
    float diff = max(dot(normal, lightDir), 0.0);
    // specular shading
    vec3 reflectDir = reflect(-lightDir, normal);
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    // combine results
    vec3 ambient = light.ambient * vec3(texture(material.diffuse, TexCoords));
    vec3 diffuse = light.diffuse * diff * vec3(texture(material.diffuse, TexCoords));
    vec3 specular = light.specular * spec * vec3(texture(material.specular, TexCoords));
    return (ambient + diffuse + specular);
}

// calculates the color when using a point light.
vec3 CalcPointLight(PointLight light, vec3 normal, vec3 fragPos, vec3 viewDir)
{
    vec3 lightDir = normalize(light.position - fragPos);
    // diffuse shading
    float diff = max(dot(normal, lightDir), 0.0);
    // specular shading
    vec3 reflectDir = reflect(-lightDir, normal);
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    // attenuation
    float distance = length(light.position - fragPos);
    float attenuation = 1.0 / (light.constant + light.linear * distance + light.quadratic * (distance * distance));    
    // combine results
    vec3 ambient = light.ambient * vec3(texture(material.diffuse, TexCoords));
    vec3 diffuse = light.diffuse * diff * vec3(texture(material.diffuse, TexCoords));
    vec3 specular = light.specular * spec * vec3(texture(material.specular, TexCoords));
    ambient *= attenuation;
    diffuse *= attenuation;
    specular *= attenuation;
    return (ambient + diffuse + specular);
}

// calculates the color when using a spot light.
vec3 CalcSpotLight(SpotLight light, vec3 normal, vec3 fragPos, vec3 viewDir)
{
    vec3 lightDir = normalize(light.position - fragPos);
    // diffuse shading
    float diff = max(dot(normal, lightDir), 0.0);
    // specular shading
    vec3 reflectDir = reflect(-lightDir, normal);
    float spec = pow(max(dot(viewDir, reflectDir), 0.0), material.shininess);
    // attenuation
    float distance = length(light.position - fragPos);
    float attenuation = 1.0 / (light.constant + light.linear * distance + light.quadratic * (distance * distance));    
    // spotlight intensity
    float theta = dot(lightDir, normalize(-light.direction)); 
    float epsilon = light.cutOff - light.outerCutOff;
    float intensity = clamp((theta - light.outerCutOff) / epsilon, 0.0, 1.0);
    // combine results
    vec3 ambient = light.ambient * vec3(texture(material.diffuse, TexCoords));
    vec3 diffuse = light.diffuse * diff * vec3(texture(material.diffuse, TexCoords));
    vec3 specular = light.specular * spec * vec3(texture(material.specular, TexCoords));
    ambient *= attenuation * intensity;
    diffuse *= attenuation * intensity;
    specular *= attenuation * intensity;
    return (ambient + diffuse + specular);
}

我们在片元着色器中定义好平行光、点光、聚光三种光，然后定义材质，注意在代码中通过宏定义将光源数量替换成4且不可更改。然后是三种光照的计算方法，也全部在片元着色器中定义好。

效果如下：

猜你喜欢

目录

热门文章