RIP协议组网实验

一、实验拓扑图

二、实验配置

1.配置各主机IP地址、子网掩码和网关
2.配置交换机LSW1和LSW2
交换机LSW1的配置如下：

<Huawei>sys
[Huawei]sysname S1
[S1]vlan batch 10 20 30
[S1]int vlan20
[S1-Vlanif20]ip address 192.168.2.1 24
[S1-Vlanif20]quit
[S1]int vlan10 
[S1-Vlanif10]ip address 192.168.1.2 24
[S1-Vlanif10]quit
[S1]int vlan30
[S1-Vlanif30]ip address 192.168.3.1 24
[S1-Vlanif30]quit
[S1]int GigabitEthernet 0/0/2
[S1-GigabitEthernet0/0/2]port link-type access
[S1-GigabitEthernet0/0/2]port default vlan 20
[S1-GigabitEthernet0/0/2]quit
[S1]int GigabitEthernet 0/0/3
[S1-GigabitEthernet0/0/3]port link-type access
[S1-GigabitEthernet0/0/3]port default vlan 30
[S1-GigabitEthernet0/0/2]quit
[S1]int GigabitEthernet 0/0/1
[S1-GigabitEthernet0/0/1]port link-type access
[S1-GigabitEthernet0/0/1]port default vlan 10
[S1-GigabitEthernet0/0/1]quit
[S1]rip
[S1-rip-1]version 2
[S1-rip-1]network 192.168.2.0
[S1-rip-1]network 192.168.3.0
[S1-rip-1]network 192.168.1.0
[S1-rip-1]quit
[S1]quit
<S1>save

交换机LSW2和LSW1的配置类似。
3.配置路由器R1

<Huawei>sys
[Huawei]sysname R1
[R1]int Ethernet 0/0/0
[R1-Ethernet0/0/0]ip address 192.168.1.1 24
[R1-Ethernet0/0/0]quit	
[R1]int Ethernet 0/0/1
[R1-Ethernet0/0/1]ip address 192.168.6.1 24
[R1-Ethernet0/0/1]quit
[R1]rip
[R1-rip-1]version 2	
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 192.168.6.0
[R1-rip-1]quit
[R1]quit
<R1>save

4.实验测试