Raspberry Pi & Rising Sun X3 Pi liga e desliga o relé de controle através do comando TCP

• Teoricamente, a facção Rising Sun X3 do horizonte também é aplicável (não testada, e a solução é fornecida no final do artigo)

• Função: liga e desliga o relé do controle remoto por meio da comunicação TCP e, em seguida, controla os interruptores elétricos do corpo do robô

---

módulo de relé

O relé é adequado para o Raspberry Pi que você pode encontrar diretamente no Taobao (torta Sunrise X3 também é aplicável), conforme mostrado na figura:

---

Comando TCP (formato HEX):

• Relé aberto: 55 02 04 00 88 01
• Relé desligado: 55 02 04 00 88 02

---

torta de framboesa

O seguinte é o código para o Raspberry Pi:

#!/usr/bin/env python
# -*- coding: utf-8 -*-
# @Time : 4/1/23 9:52 PM
# @Author : Chenan_Wang
# @File : socket_test.py
# @Software : PyCharm

import os
import RPi.GPIO as GPIO
import sys
import math
import time
from threading import Thread
from socket import *


# 接受TCP消息
def Receive(TCPsocket):
    while True:
        socket_data = TCPsocket.recv(1024)
        # print('raw', socket_data)
        socket_data = socket_data.hex()    # 转成hex编码格式
        # print('2hex', socket_data)
        if len(socket_data):
            key = socket_data
            print("\n")
            frame_header = key[0:2]
            frame_mark = key[2:4]
            data_length = key[4:6]
            data_cmd = key[6:10]
            data_data = key[10:12]

            # print('接收数据：{!r}'.format(key.decode('utf-8')))
            if frame_header + frame_mark == '5502':
                print('接收到数据: ' + frame_header + " " + frame_mark + " " + data_length + " " + data_cmd + " " + data_data)

                if data_cmd == '0088':  # 继电器
                    print('-----风机控制-----')
                    try:
                        if data_data == '01':       # 继电器开
                            GPIO.output(Relay_Ch1, GPIO.LOW)
                            print('------风机开------')
                            TCPsocket.send(bytes.fromhex('550204008801'))   # 返回继电器开的指令
                            time.sleep(0.5)
                        elif data_data == '02':     # 继电器关
                            GPIO.output(Relay_Ch1, GPIO.HIGH)
                            print('------风机关------')
                            TCPsocket.send(bytes.fromhex('550204008802'))  # 返回继电器关的指令
                            time.sleep(0.5)
                    except:
                        print("except")
                        GPIO.cleanup()
            elif key == '88':
                print("-----关闭TCP连接-----")
                TCPsocket.close()
                break
            else:
                print("Error, The Target Message is WRONG!!!")
                # break
        else:
            print('-----未接收到客户端数据，可能连接已经断开-----')
            # 数据中断时进行服务重启程序，先close 再accept等待重新连线
            # 可以防止出现当client意外终止导致server的中断（Broken pipe错误）
            print('-----正在重新建立连接-----')
            TCPsocket.close()
            TCPsocket, clientInfo = serverSocket.accept()


if __name__ == '__main__':

    # 配置树莓派
    Relay_Ch1 = 26
    Relay_Ch2 = 20
    Relay_Ch3 = 21
    GPIO.setwarnings(False)
    GPIO.setmode(GPIO.BCM)           # 设置BMC编码模式
    GPIO.setup(Relay_Ch1, GPIO.OUT)  # 设置26引脚为输出
    GPIO.setup(Relay_Ch2, GPIO.OUT)  # 设置20引脚为输出
    GPIO.setup(Relay_Ch3, GPIO.OUT)  # 设置21引脚为输出
    print("-----Setup The Relay Module is SUCCESS!-----\n")

    # 启动TCP通讯
    serverSocket = socket(AF_INET, SOCK_STREAM)
    serverSocket.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
    serverSocket.bind(('192.168.72.134', 8200))     # ×××××这里改IP和端口号××××× #
    serverSocket.listen(5)
    print("-----树莓派服务器正在启动!-----")

    TCPsocket, clientInfo = serverSocket.accept()
    # Receive(Sockets)
    t1 = Thread(target=Receive, args=(TCPsocket,))
    t1.start()

---

Torta Sol Nascente X3

• Forneça apenas um plano de teste, ainda não verificado na máquina real X3

Primeiro instale hobot-arm64-gpiopy.deb (instalado por padrão)

dpkg –i hobot-arm64-gpiopy.deb

Em seguida, modifique o código para:

#!/usr/bin/env python
# -*- coding: utf-8 -*-
# @Time : 4/1/23 9:52 PM
# @Author : Chenan_Wang
# @File : socket_test.py
# @Software : PyCharm

import os
import Hobot.GPIO as GPIO
import sys
import math
import time
from threading import Thread
from socket import *


# 接受TCP消息
def Receive(TCPsocket):
    while True:
        socket_data = TCPsocket.recv(1024)
        # print('raw', socket_data)
        socket_data = socket_data.hex()    # 转成hex编码格式
        # print('2hex', socket_data)
        if len(socket_data):
            key = socket_data
            print("\n")
            frame_header = key[0:2]
            frame_mark = key[2:4]
            data_length = key[4:6]
            data_cmd = key[6:10]
            data_data = key[10:12]

            # print('接收数据：{!r}'.format(key.decode('utf-8')))
            if frame_header + frame_mark == '5502':
                print('接收到数据: ' + frame_header + " " + frame_mark + " " + data_length + " " + data_cmd + " " + data_data)

                if data_cmd == '0088':  # 继电器
                    print('-----风机控制-----')
                    try:
                        if data_data == '01':       # 继电器开
                            GPIO.output(Relay_Ch1, GPIO.LOW)
                            print('------风机开------')
                            TCPsocket.send(bytes.fromhex('550204008801'))   # 返回继电器开的指令
                            time.sleep(0.5)
                        elif data_data == '02':     # 继电器关
                            GPIO.output(Relay_Ch1, GPIO.HIGH)
                            print('------风机关------')
                            TCPsocket.send(bytes.fromhex('550204008802'))  # 返回继电器关的指令
                            time.sleep(0.5)
                    except:
                        print("except")
                        GPIO.cleanup()
            elif key == '88':
                print("-----关闭TCP连接-----")
                TCPsocket.close()
                break
            else:
                print("Error, The Target Message is WRONG!!!")
                # break
        else:
            print('-----未接收到客户端数据，可能连接已经断开-----')
            # 数据中断时进行服务重启程序，先close 再accept等待重新连线
            # 可以防止出现当client意外终止导致server的中断（Broken pipe错误）
            print('-----正在重新建立连接-----')
            TCPsocket.close()
            TCPsocket, clientInfo = serverSocket.accept()


if __name__ == '__main__':

    # 配置X3派
    Relay_Ch1 = 26
    Relay_Ch2 = 20
    Relay_Ch3 = 21
    GPIO.setwarnings(False)
    GPIO.setmode(GPIO.BCM)           # 设置BMC编码模式
    GPIO.setup(Relay_Ch1, GPIO.OUT)  # 设置26引脚为输出
    GPIO.setup(Relay_Ch2, GPIO.OUT)  # 设置20引脚为输出
    GPIO.setup(Relay_Ch3, GPIO.OUT)  # 设置21引脚为输出
    print("-----Setup The Relay Module is SUCCESS!-----\n")

    # 启动TCP通讯
    serverSocket = socket(AF_INET, SOCK_STREAM)
    serverSocket.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
    serverSocket.bind(('192.168.72.134', 8200))     # ×××××这里改IP和端口号××××× #
    serverSocket.listen(5)
    print("-----X3派服务器正在启动!-----")

    TCPsocket, clientInfo = serverSocket.accept()
    # Receive(Sockets)
    t1 = Thread(target=Receive, args=(TCPsocket,))
    t1.start()