より良い運用サーバーをシミュレートするために、あなたは、ローカル仮想マシンでテストを実行することができます。一般的に、実際の運用サーバーは、ローカルホストであるか、同じネットワーク内で、仮想マシンは、固定IPを設定するだけでホストモードを選択するために、テストがために特に重要です。
Hostonly仮想マシンのネットワークモードの選択、すなわちのみマスタモード、IP固定設定、同じホスト。
VMwareのネットワークアダプタVMnet1カードを:使用してNICモードのみのホストの仮想マシン
仮想ネットワークエディタを見ます
メニューバー - >「編集」 - >「仮想ネットワークエディタ。」
ホストネットワークカードを設定します。
Windows键+X
- >「ネットワーク接続」 - >変更アダプタオプション
ここでは、仮想マシンのネットワークのIP IPと一致して
Linux7の静的のIPに設定してください
[root@localhost ~]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# vim ifcfg-ens33 ##编辑配置文件
[root@localhost network-scripts]# systemctl stop NetworkManager
[root@localhost network-scripts]# systemctl restart network
[root@localhost network-scripts]# systemctl start NetworkManager
[root@localhost network-scripts]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.224.131 netmask 255.255.255.0 broadcast 192.168.224.255
inet6 fe80::20c:29ff:fe34:6ea1 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:34:6e:a1 txqueuelen 1000 (Ethernet)
RX packets 2 bytes 501 (501.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 30 bytes 4168 (4.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 152 bytes 15108 (14.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 152 bytes 15108 (14.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:14:c3:5c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Linux8の静的のIPに設定してください
[root@localhost ~]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# ls
ifcfg-ens160
[root@localhost network-scripts]# vim ifcfg-ens160 ##编辑配置文件
[root@localhost network-scripts]# systemctl restart NetworkManager ##重启网络
[root@localhost network-scripts]# ifconfig
ens160: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.224.130 netmask 255.255.255.0 broadcast 192.168.224.255
inet6 fe80::b277:6c55:4e4b:dd88 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:4b:bd:69 txqueuelen 1000 (Ethernet)
RX packets 1003 bytes 70769 (69.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24 bytes 2905 (2.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 104 bytes 9380 (9.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 104 bytes 9380 (9.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:01:f1:c4 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
テスト2台の仮想マシンがユニコムできるかどうか
[root@localhost network-scripts]# ping 192.168.224.130 -c 3 ##Linux7 ping Linux8
PING 192.168.224.130 (192.168.224.130) 56(84) bytes of data.
64 bytes from 192.168.224.130: icmp_seq=1 ttl=64 time=0.372 ms
64 bytes from 192.168.224.130: icmp_seq=2 ttl=64 time=0.753 ms
64 bytes from 192.168.224.130: icmp_seq=3 ttl=64 time=0.686 ms
--- 192.168.224.130 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.372/0.603/0.753/0.168 ms
##############################################################
[root@localhost network-scripts]# ssh [email protected] ##远程登陆Linux8
The authenticity of host '192.168.224.130 (192.168.224.130)' can't be established.
ECDSA key fingerprint is SHA256:wbmHVDDkVLCBLJXwY6zD+dS0vJpzqpEsXInY8CE0D9I.
ECDSA key fingerprint is MD5:d5:8a:f6:4e:71:10:de:75:c1:70:39:b6:6c:72:57:26.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.224.130' (ECDSA) to the list of known hosts.
[email protected]'s password:
Activate the web console with: systemctl enable --now cockpit.socket
Last login: Fri Feb 14 02:10:39 2020
[root@localhost ~]# ping 192.168.224.131 -c 3 ##Linux8 ping Linux7
PING 192.168.224.131 (192.168.224.131) 56(84) bytes of data.
64 bytes from 192.168.224.131: icmp_seq=1 ttl=64 time=0.793 ms
64 bytes from 192.168.224.131: icmp_seq=2 ttl=64 time=0.752 ms
64 bytes from 192.168.224.131: icmp_seq=3 ttl=64 time=0.740 ms
--- 192.168.224.131 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 64ms
rtt min/avg/max/mdev = 0.740/0.761/0.793/0.039 ms
これまでのところ、ホストモードでのVMware Workstationのローカル・エリア・ネットワークの唯一の成功確立します。