Compile Aria2 for windows x64

Reference:https://blog.yuki-nagato.com/Compile an aria2 without thread limit under Windows/

principle

is cross-compiled in Docker based on the officially provided Dockerfile.
https://github.com/aria2/aria2#cross-compiling-windows-binary

process

It is not convenient to install Docker under Windows, so I installed Docker in the Ubuntu virtual machine to operate.

First download the Dockerfile.mingw in the source code of aria2. After modification, it is as follows. I have marked the modifications in Chinese.

# Dockerfile to build aria2 Windows binary using ubuntu mingw-w64
# cross compiler chain.
#
# $ sudo docker build -t aria2-mingw - < Dockerfile.mingw
#
# After successful build, windows binary is located at
# /aria2/src/aria2c.exe.  You can copy the binary using following
# commands:
#
# $ id=$(sudo docker create aria2-mingw)
# $ sudo docker cp $id:/aria2/src/aria2c.exe <dest>
# $ sudo docker rm -v $id

FROM ubuntu:16.04

MAINTAINER Tatsuhiro Tsujikawa

# Change HOST to x86_64-w64-mingw32 to build 64-bit binary
### 编译64位程序 ###
ENV HOST x86_64-w64-mingw32

# It would be better to use nearest ubuntu archive mirror for faster
# downloads.
# RUN sed -ie 's/archive\.ubuntu/jp.archive.ubuntu/g' /etc/apt/sources.list
### 使用中科大ubuntu源 ###
RUN sed -i 's/archive.ubuntu.com/mirrors.ustc.edu.cn/g' /etc/apt/sources.list

RUN apt-get update && \
    apt-get install -y \
        make binutils autoconf automake autotools-dev libtool \
        pkg-config git curl dpkg-dev gcc-mingw-w64 \
        autopoint libcppunit-dev libxml2-dev libgcrypt11-dev lzip

### 使用代理下载文件(代理可能会不可用，开启全局科学上网的情况下，可以删除这里的代理设置) ###
RUN curl -x socks5h://192.168.31.5:1080 -L -O https://gmplib.org/download/gmp/gmp-6.1.2.tar.lz && \
    curl -x socks5h://192.168.31.5:1080 -L -O https://github.com/libexpat/libexpat/releases/download/R_2_2_5/expat-2.2.5.tar.bz2 && \
    curl -x socks5h://192.168.31.5:1080 -L -O https://www.sqlite.org/2018/sqlite-autoconf-3230100.tar.gz && \
    curl -x socks5h://192.168.31.5:1080 -L -O http://zlib.net/zlib-1.2.11.tar.gz && \
    curl -x socks5h://192.168.31.5:1080 -L -O https://c-ares.haxx.se/download/c-ares-1.14.0.tar.gz && \
    curl -x socks5h://192.168.31.5:1080 -L -O http://libssh2.org/download/libssh2-1.8.0.tar.gz

RUN tar xf gmp-6.1.2.tar.lz && \
    cd gmp-6.1.2 && \
    ./configure \
        --disable-shared \
        --enable-static \
        --prefix=/usr/local/$HOST \
        --host=$HOST \
        --disable-cxx \
        --enable-fat \
        CFLAGS="-mtune=generic -O2 -g0" && \
    make install

RUN tar xf expat-2.2.5.tar.bz2 && \
    cd expat-2.2.5 && \
    ./configure \
        --disable-shared \
        --enable-static \
        --prefix=/usr/local/$HOST \
        --host=$HOST \
        --build=`dpkg-architecture -qDEB_BUILD_GNU_TYPE` && \
    make install

RUN tar xf sqlite-autoconf-3230100.tar.gz && \
    cd sqlite-autoconf-3230100 && \
    ./configure \
        --disable-shared \
        --enable-static \
        --prefix=/usr/local/$HOST \
        --host=$HOST \
        --build=`dpkg-architecture -qDEB_BUILD_GNU_TYPE` && \
    make install

RUN tar xf zlib-1.2.11.tar.gz && \
    cd zlib-1.2.11 && \
    CC=$HOST-gcc \
    AR=$HOST-ar \
    LD=$HOST-ld \
    RANLIB=$HOST-ranlib \
    STRIP=$HOST-strip \
    ./configure \
        --prefix=/usr/local/$HOST \
        --libdir=/usr/local/$HOST/lib \
        --includedir=/usr/local/$HOST/include \
        --static && \
    make install

RUN tar xf c-ares-1.14.0.tar.gz && \
    cd c-ares-1.14.0 && \
    ./configure \
        --disable-shared \
        --enable-static \
        --without-random \
        --prefix=/usr/local/$HOST \
        --host=$HOST \
        --build=`dpkg-architecture -qDEB_BUILD_GNU_TYPE` \
        LIBS="-lws2_32" && \
    make install

RUN tar xf libssh2-1.8.0.tar.gz && \
    cd libssh2-1.8.0 && \
    ./configure \
        --disable-shared \
        --enable-static \
        --prefix=/usr/local/$HOST \
        --host=$HOST \
        --build=`dpkg-architecture -qDEB_BUILD_GNU_TYPE` \
        --without-openssl \
        --with-wincng \
        LIBS="-lws2_32" && \
    make install
ADD https://api.github.com/repos/aria2/aria2/git/refs/heads/master version.json
### 这里是下载aria2官方源码编译，自定义源码可修改这里的地址 ###
RUN git clone https://github.com/aria2/aria2 && \
    cd aria2 && autoreconf -i && ./mingw-config && make && \
    $HOST-strip src/aria2c.exe

The compilation and export methods have been explained in the comments at the top of the file. I believe you can understand it. If the agent is unavailable, you can change the agent yourself.

Enter the Dockerfile.mingw directory and execute the following command to compile

sudo docker build -t aria2-mingw - < Dockerfile.mingw

After success, the compiled exe file will be placed in /aria2/src/aria2c.exe.

Copy it to the current directory with the following command:

id=$(sudo docker create aria2-mingw)
sudo docker cp $id:/aria2/src/aria2c.exe ./
sudo docker rm -v $id