El entorno Docker implementa la versión nacos de postgres

1. Docker instala postgres
y ejecuta el comando: docker pull postgres para extraer la última versión de postgres

2. Verifique si la imagen de postgres se instaló correctamente: docker imags (ver imagen), puede ver que se ha actualizado la última versión de la imagen de postgres extraído

3. Edite un archivo docker-compose.yml, la cuenta es postgres, la contraseña es 123456 y el directorio de datos se creará automáticamente.

version: "3.8"
services:
  dev-postgres:
    image: postgres:latest
    container_name: postgres
    environment:
      POSTGRES_USER: postgres
      POSTGRES_PASSWORD: 123456
    ports:
      - 15433:5432
    volumes:
      - ./data:/var/lib/postgresql/data
      - /etc/localtime:/etc/localtime:ro #将外边时间直接挂载到容器内部，权限只读
    restart: always

4. Use docker-compose up -d para iniciar postgres en segundo plano. Si el inicio es exitoso, use docker ps -a para ver el contenedor de Docker. Puede ver que el contenedor de Postgres se ha creado y el número de puerto externo es 15433. .


5. Utilice las herramientas del cliente para conectarse a Postgres, ingrese IP, número de puerto, número de cuenta y contraseña para conectarse a Postgres

6. Agregue una base de datos nacos e importe tablas relacionadas. Pongo las tablas relevantes en el disco de red y puedo extraer directamente el archivo nacos-config.sql e importarlo. Puse el SQL al final del artículo. Si no desea utilizar el disco de red de Baidu, puede copiarlo y ejecutarlo directamente.
Enlace: https://pan.baidu.com/s/1ZOfrc2yWllBSgcgV8-o0-Q
Código de extracción: e2hb

7. Cree el directorio nacos y cargue los archivos relacionados. Los complementos son un complemento de postgres. Debido a que nacos es mysql, necesita un complemento para soportar postgres. . application.properties en conf es el archivo de configuración de nacos. La configuración de Nacos está disponible. Subí los archivos relevantes a Baidu Cloud Disk para su extracción. La instalación de Nacos requiere un entorno jdk. De lo contrario, consulte https://editor.csdn.net/md/?articleId=131560825 para la instalación.

contenido del archivo application.properties

#
# Copyright 1999-2021 Alibaba Group Holding Ltd.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#*************** Spring Boot Related Configurations ***************#
### Default web context path:
server.servlet.contextPath=/nacos
### Include message field
server.error.include-message=ALWAYS
### Default web server port:
server.port=8848

#*************** Network Related Configurations ***************#
### If prefer hostname over ip for Nacos server addresses in cluster.conf:
# nacos.inetutils.prefer-hostname-over-ip=false

### Specify local server's IP:
# nacos.inetutils.ip-address=


#*************** Config Module Related Configurations ***************#
### If use MySQL as datasource:
### Deprecated configuration property, it is recommended to use `spring.sql.init.platform` replaced.
# spring.datasource.platform=postgresql
#spring.sql.init.platform=mysql

### Count of DB:
#db.num=1
### Connect URL of DB:
#db.url.0=jdbc:mysql://127.0.0.1:3306/ry-config?characterEncoding=utf8&connectTimeout=1000&socketTimeout=3000&autoReconnect=true&useUnicode=true&useSSL=false&serverTimezone=UTC
#db.user.0=root
#db.password.0=root
spring.datasource.platform=postgresql
db.num=1
db.url.0=jdbc:postgresql://localhost:15433/nacos_config?tcpKeepAlive=true&reWriteBatchedInserts=true&ApplicationName=nacos_java
db.user=postgres
db.password=123456
db.pool.config.driverClassName=org.postgresql.Driver

### Connection pool configuration: hikariCP
db.pool.config.connectionTimeout=30000
db.pool.config.validationTimeout=10000
db.pool.config.maximumPoolSize=20
db.pool.config.minimumIdle=2

#*************** Naming Module Related Configurations ***************#

### If enable data warmup. If set to false, the server would accept request without local data preparation:
# nacos.naming.data.warmup=true

### If enable the instance auto expiration, kind like of health check of instance:
# nacos.naming.expireInstance=true

### Add in 2.0.0
### The interval to clean empty service, unit: milliseconds.
# nacos.naming.clean.empty-service.interval=60000

### The expired time to clean empty service, unit: milliseconds.
# nacos.naming.clean.empty-service.expired-time=60000

### The interval to clean expired metadata, unit: milliseconds.
# nacos.naming.clean.expired-metadata.interval=5000

### The expired time to clean metadata, unit: milliseconds.
# nacos.naming.clean.expired-metadata.expired-time=60000

### The delay time before push task to execute from service changed, unit: milliseconds.
# nacos.naming.push.pushTaskDelay=500

### The timeout for push task execute, unit: milliseconds.
# nacos.naming.push.pushTaskTimeout=5000

### The delay time for retrying failed push task, unit: milliseconds.
# nacos.naming.push.pushTaskRetryDelay=1000

### Since 2.0.3
### The expired time for inactive client, unit: milliseconds.
# nacos.naming.client.expired.time=180000

#*************** CMDB Module Related Configurations ***************#
### The interval to dump external CMDB in seconds:
# nacos.cmdb.dumpTaskInterval=3600

### The interval of polling data change event in seconds:
# nacos.cmdb.eventTaskInterval=10

### The interval of loading labels in seconds:
# nacos.cmdb.labelTaskInterval=300

### If turn on data loading task:
# nacos.cmdb.loadDataAtStart=false


#*************** Metrics Related Configurations ***************#
### Metrics for prometheus
#management.endpoints.web.exposure.include=*

### Metrics for elastic search
management.metrics.export.elastic.enabled=false
#management.metrics.export.elastic.host=http://localhost:9200

### Metrics for influx
management.metrics.export.influx.enabled=false
#management.metrics.export.influx.db=springboot
#management.metrics.export.influx.uri=http://localhost:8086
#management.metrics.export.influx.auto-create-db=true
#management.metrics.export.influx.consistency=one
#management.metrics.export.influx.compressed=true

#*************** Access Log Related Configurations ***************#
### If turn on the access log:
server.tomcat.accesslog.enabled=true

### The access log pattern:
server.tomcat.accesslog.pattern=%h %l %u %t "%r" %s %b %D %{User-Agent}i %{Request-Source}i

### The directory of access log:
server.tomcat.basedir=file:.

#*************** Access Control Related Configurations ***************#
### If enable spring security, this option is deprecated in 1.2.0:
#spring.security.enabled=false

### The ignore urls of auth
nacos.security.ignore.urls=/,/error,/**/*.css,/**/*.js,/**/*.html,/**/*.map,/**/*.svg,/**/*.png,/**/*.ico,/console-ui/public/**,/v1/auth/**,/v1/console/health/**,/actuator/**,/v1/console/server/**

### The auth system to use, currently only 'nacos' and 'ldap' is supported:
nacos.core.auth.system.type=nacos

### If turn on auth system:
nacos.core.auth.enabled=true

### Turn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.
nacos.core.auth.caching.enabled=true

### Since 1.4.1, Turn on/off white auth for user-agent: nacos-server, only for upgrade from old version.
nacos.core.auth.enable.userAgentAuthWhite=false

### Since 1.4.1, worked when nacos.core.auth.enabled=true and nacos.core.auth.enable.userAgentAuthWhite=false.
### The two properties is the white list for auth and used by identity the request from other server.
nacos.core.auth.server.identity.key=test
nacos.core.auth.server.identity.value=test

### worked when nacos.core.auth.system.type=nacos
### The token expiration in seconds:
nacos.core.auth.plugin.nacos.token.cache.enable=false
nacos.core.auth.plugin.nacos.token.expire.seconds=18000
### The default token (Base64 String):
nacos.core.auth.plugin.nacos.token.secret.key=SecretKey012345678901234567890123456789012345678901234567890123456789

### worked when nacos.core.auth.system.type=ldap，{0} is Placeholder,replace login username
#nacos.core.auth.ldap.url=ldap://localhost:389
#nacos.core.auth.ldap.basedc=dc=example,dc=org
#nacos.core.auth.ldap.userDn=cn=admin,${nacos.core.auth.ldap.basedc}
#nacos.core.auth.ldap.password=admin
#nacos.core.auth.ldap.userdn=cn={0},dc=example,dc=org
#nacos.core.auth.ldap.filter.prefix=uid
#nacos.core.auth.ldap.case.sensitive=true


#*************** Istio Related Configurations ***************#
### If turn on the MCP server:
nacos.istio.mcp.server.enabled=false
### nacos访问地址的密码
nacos.config.password=nacos
### nacos访问地址的用户名
nacos.config.username=nacos
#*************** Core Related Configurations ***************#

### set the WorkerID manually
# nacos.core.snowflake.worker-id=

### Member-MetaData
# nacos.core.member.meta.site=
# nacos.core.member.meta.adweight=
# nacos.core.member.meta.weight=

### MemberLookup
### Addressing pattern category, If set, the priority is highest
# nacos.core.member.lookup.type=[file,address-server]
## Set the cluster list with a configuration file or command-line argument
# nacos.member.list=192.168.16.101:8847?raft_port=8807,192.168.16.101?raft_port=8808,192.168.16.101:8849?raft_port=8809
## for AddressServerMemberLookup
# Maximum number of retries to query the address server upon initialization
# nacos.core.address-server.retry=5
## Server domain name address of [address-server] mode
# address.server.domain=jmenv.tbsite.net
## Server port of [address-server] mode
# address.server.port=8080
## Request address of [address-server] mode
# address.server.url=/nacos/serverlist

#*************** JRaft Related Configurations ***************#

### Sets the Raft cluster election timeout, default value is 5 second
# nacos.core.protocol.raft.data.election_timeout_ms=5000
### Sets the amount of time the Raft snapshot will execute periodically, default is 30 minute
# nacos.core.protocol.raft.data.snapshot_interval_secs=30
### raft internal worker threads
# nacos.core.protocol.raft.data.core_thread_num=8
### Number of threads required for raft business request processing
# nacos.core.protocol.raft.data.cli_service_thread_num=4
### raft linear read strategy. Safe linear reads are used by default, that is, the Leader tenure is confirmed by heartbeat
# nacos.core.protocol.raft.data.read_index_type=ReadOnlySafe
### rpc request timeout, default 5 seconds
# nacos.core.protocol.raft.data.rpc_request_timeout_ms=5000

#*************** Distro Related Configurations ***************#

### Distro data sync delay time, when sync task delayed, task will be merged for same data key. Default 1 second.
# nacos.core.protocol.distro.data.sync.delayMs=1000

### Distro data sync timeout for one sync data, default 3 seconds.
# nacos.core.protocol.distro.data.sync.timeoutMs=3000

### Distro data sync retry delay time when sync data failed or timeout, same behavior with delayMs, default 3 seconds.
# nacos.core.protocol.distro.data.sync.retryDelayMs=3000

### Distro data verify interval time, verify synced data whether expired for a interval. Default 5 seconds.
# nacos.core.protocol.distro.data.verify.intervalMs=5000

### Distro data verify timeout for one verify, default 3 seconds.
# nacos.core.protocol.distro.data.verify.timeoutMs=3000

### Distro data load retry delay when load snapshot data failed, default 30 seconds.
# nacos.core.protocol.distro.data.load.retryDelayMs=30000

### enable to support prometheus service discovery
#nacos.prometheus.metrics.enabled=true

### Since 2.3
#*************** Grpc Configurations ***************#

## sdk grpc(between nacos server and client) configuration
## Sets the maximum message size allowed to be received on the server.
#nacos.remote.server.grpc.sdk.max-inbound-message-size=10485760

## Sets the time(milliseconds) without read activity before sending a keepalive ping. The typical default is two hours.
#nacos.remote.server.grpc.sdk.keep-alive-time=7200000

## Sets a time(milliseconds) waiting for read activity after sending a keepalive ping. Defaults to 20 seconds.
#nacos.remote.server.grpc.sdk.keep-alive-timeout=20000


## Sets a time(milliseconds) that specify the most aggressive keep-alive time clients are permitted to configure. The typical default is 5 minutes
#nacos.remote.server.grpc.sdk.permit-keep-alive-time=300000

## cluster grpc(inside the nacos server) configuration
#nacos.remote.server.grpc.cluster.max-inbound-message-size=10485760

## Sets the time(milliseconds) without read activity before sending a keepalive ping. The typical default is two hours.
#nacos.remote.server.grpc.cluster.keep-alive-time=7200000

## Sets a time(milliseconds) waiting for read activity after sending a keepalive ping. Defaults to 20 seconds.
#nacos.remote.server.grpc.cluster.keep-alive-timeout=20000

## Sets a time(milliseconds) that specify the most aggressive keep-alive time clients are permitted to configure. The typical default is 5 minutes
#nacos.remote.server.grpc.cluster.permit-keep-alive-time=300000

Modifique la conexión de la base de datos y la cuenta y contraseña de inicio de sesión de nacos como se muestra a continuación. La cuenta y la contraseña predeterminadas son nacos.

Archivo docker-compos.yml (el puerto de mapeo externo es 18848)

version: "3"
services:
  nacos-pgsql:
    image: nacos/nacos-server:v2.2.3
    container_name: nacos-pgsql
    volumes:
      - ./logs:/home/nacos/logs
      - ./data:/home/nacos/data
      - ./plugins/:/home/nacos/plugins
      - ./conf/application.properties:/home/nacos/conf/application.properties:rw
    ports:
      - '18848:8848'
      - '19848:9848'
    environment:
      - MODE=standalone
      - PREFER_HOST_MODE=hostname
      - NACOS_SERVER_PORT=8848
    restart: always

8. Ejecute el comando docker-compose up -d. Después de iniciar nacos, puede usar docker logs -f --tail=1000 nacos-pgsql para ver el registro de inicio.

9. docker ps -a para ver que el contenedor de nacos tiene 10. Acceso a

la página:


configuración aquí La información es la tabla config_info importada. De forma predeterminada, agregué la información de configuración de la versión del microservicio ruoyi, que se puede modificar de acuerdo con la situación real.
11. Finalmente, adjunte el archivo sql: nacos_config.sql importado

/*
 Navicat Premium Data Transfer

 Source Server         : 本地postgres
 Source Server Type    : PostgreSQL
 Source Server Version : 140001
 Source Host           : 192.168.159.141:15433
 Source Catalog        : nacos_config
 Source Schema         : public

 Target Server Type    : PostgreSQL
 Target Server Version : 140001
 File Encoding         : 65001

 Date: 07/07/2023 13:04:39
*/


-- ----------------------------
-- Sequence structure for config_info_aggr_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."config_info_aggr_id_seq";
CREATE SEQUENCE "public"."config_info_aggr_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for config_info_beta_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."config_info_beta_id_seq";
CREATE SEQUENCE "public"."config_info_beta_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for config_info_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."config_info_id_seq";
CREATE SEQUENCE "public"."config_info_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for config_info_tag_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."config_info_tag_id_seq";
CREATE SEQUENCE "public"."config_info_tag_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for config_tags_relation_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."config_tags_relation_id_seq";
CREATE SEQUENCE "public"."config_tags_relation_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for config_tags_relation_nid_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."config_tags_relation_nid_seq";
CREATE SEQUENCE "public"."config_tags_relation_nid_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for group_capacity_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."group_capacity_id_seq";
CREATE SEQUENCE "public"."group_capacity_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for his_config_info_nid_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."his_config_info_nid_seq";
CREATE SEQUENCE "public"."his_config_info_nid_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for tenant_capacity_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."tenant_capacity_id_seq";
CREATE SEQUENCE "public"."tenant_capacity_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Sequence structure for tenant_info_id_seq
-- ----------------------------
DROP SEQUENCE IF EXISTS "public"."tenant_info_id_seq";
CREATE SEQUENCE "public"."tenant_info_id_seq" 
INCREMENT 1
MINVALUE  1
MAXVALUE 9223372036854775807
START 1
CACHE 1;

-- ----------------------------
-- Table structure for config_info
-- ----------------------------
DROP TABLE IF EXISTS "public"."config_info";
CREATE TABLE "public"."config_info" (
  "id" int8 NOT NULL DEFAULT nextval('config_info_id_seq'::regclass),
  "data_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "group_id" varchar(255) COLLATE "pg_catalog"."default",
  "content" text COLLATE "pg_catalog"."default" NOT NULL,
  "md5" varchar(32) COLLATE "pg_catalog"."default",
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text COLLATE "pg_catalog"."default",
  "src_ip" varchar(20) COLLATE "pg_catalog"."default",
  "app_name" varchar(128) COLLATE "pg_catalog"."default",
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default",
  "c_desc" varchar(256) COLLATE "pg_catalog"."default",
  "c_use" varchar(64) COLLATE "pg_catalog"."default",
  "effect" varchar(64) COLLATE "pg_catalog"."default",
  "type" varchar(64) COLLATE "pg_catalog"."default",
  "c_schema" text COLLATE "pg_catalog"."default",
  "encrypted_data_key" text COLLATE "pg_catalog"."default" NOT NULL
)
;
COMMENT ON COLUMN "public"."config_info"."id" IS 'id';
COMMENT ON COLUMN "public"."config_info"."data_id" IS 'data_id';
COMMENT ON COLUMN "public"."config_info"."content" IS 'content';
COMMENT ON COLUMN "public"."config_info"."md5" IS 'md5';
COMMENT ON COLUMN "public"."config_info"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "public"."config_info"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "public"."config_info"."src_user" IS 'source user';
COMMENT ON COLUMN "public"."config_info"."src_ip" IS 'source ip';
COMMENT ON COLUMN "public"."config_info"."tenant_id" IS '租户字段';
COMMENT ON COLUMN "public"."config_info"."encrypted_data_key" IS '秘钥';
COMMENT ON TABLE "public"."config_info" IS 'config_info';

-- ----------------------------
-- Records of config_info
-- ----------------------------
INSERT INTO "public"."config_info" VALUES (1, 'application-dev.yml', 'DEFAULT_GROUP', 'spring:
  autoconfigure:
    exclude: com.alibaba.druid.spring.boot.autoconfigure.DruidDataSourceAutoConfigure
  mvc:
    pathmatch:
      matching-strategy: ant_path_matcher

# feign 配置
feign:
  sentinel:
    enabled: true
  okhttp:
    enabled: true
  httpclient:
    enabled: false
  client:
    config:
      default:
        connectTimeout: 10000
        readTimeout: 10000
  compression:
    request:
      enabled: true
    response:
      enabled: true

#  暴露监控端点
management:
  endpoints:
    web:
      exposure:
        include: ''*''
', '09ac789741e880f0a19053afad53bf8e', '2020-05-20 12:00:00', '2023-07-07 12:22:59.258', 'nacos', '192.168.159.1', '', '', '通用配置', 'null', 'null', 'yaml', '', '');
INSERT INTO "public"."config_info" VALUES (4, 'ruoyi-monitor-dev.yml', 'DEFAULT_GROUP', '# spring
spring:
  security:
    user:
      name: ruoyi
      password: 123456
  boot:
    admin:
      ui:
        title: 若依服务状态监控
', '6f122fd2bfb8d45f858e7d6529a9cd44', '2020-11-20 00:00:00', '2022-09-29 02:48:54', 'nacos', '0:0:0:0:0:0:0:1', '', '', '监控中心', 'null', 'null', 'yaml', '', '');
INSERT INTO "public"."config_info" VALUES (8, 'ruoyi-file-dev.yml', 'DEFAULT_GROUP', '# 本地文件上传    
file:
    domain: http://127.0.0.1:9300
    path: D:/ruoyi/uploadPath
    prefix: /statics

# FastDFS配置
fdfs:
  domain: http://8.129.231.12
  soTimeout: 3000
  connectTimeout: 2000
  trackerList: 8.129.231.12:22122

# Minio配置
minio:
  url: http://8.129.231.12:9000
  accessKey: minioadmin
  secretKey: minioadmin
  bucketName: test', '5382b93f3d8059d6068c0501fdd41195', '2020-11-20 00:00:00', '2020-12-21 21:01:59', NULL, '0:0:0:0:0:0:0:1', '', '', '文件服务', 'null', 'null', 'yaml', NULL, '');
INSERT INTO "public"."config_info" VALUES (3, 'ruoyi-auth-dev.yml', 'DEFAULT_GROUP', 'spring:
  redis:
    host: 127.0.0.1
    port: 16379
    database: 6
    password: 123456
', '46e7fed554a8e3b1df989db8f43cab45', '2020-11-20 00:00:00', '2023-07-07 12:31:26.316', 'nacos', '192.168.159.1', '', '', '认证中心', 'null', 'null', 'yaml', '', '');
INSERT INTO "public"."config_info" VALUES (7, 'ruoyi-job-dev.yml', 'DEFAULT_GROUP', '# spring配置
spring:
  redis:
    host: 127.0.0.1
    port: 16379
    database: 6
    password: 123456
  datasource:
    driver-class-name: org.postgresql.Driver
    url: jdbc:postgresql://127.0.0.1:15433/postgres?stringtype=unspecified&useUnicode=true&characterEncoding=utf8&zeroDateTimeBehavior=convertToNull&useSSL=true&serverTimezone=GMT%2B8
    username: postgres
    password: 123456

# mybatis配置
mybatis:
    # 搜索指定包别名
    typeAliasesPackage: com.ruoyi.job.domain
    # 配置mapper的扫描，找到所有的mapper.xml映射文件
    mapperLocations: classpath:mapper/**/*.xml

# swagger配置
swagger:
  title: 定时任务接口文档
  license: Powered By ruoyi
  licenseUrl: https://ruoyi.vip
', '660b961752d9802be227915a9a0bd95f', '2020-11-20 00:00:00', '2023-07-07 12:32:12.452', 'nacos', '192.168.159.1', '', '', '定时任务', 'null', 'null', 'yaml', '', '');
INSERT INTO "public"."config_info" VALUES (6, 'ruoyi-gen-dev.yml', 'DEFAULT_GROUP', '# spring配置
spring:
  redis:
    host: 127.0.0.1
    port: 16379
    database: 6
    password: 123456
  datasource:
    driver-class-name: org.postgresql.Driver
    url: jdbc:postgresql://127.0.0.1:15433/postgres?stringtype=unspecified&useUnicode=true&characterEncoding=utf8&zeroDateTimeBehavior=convertToNull&useSSL=true&serverTimezone=GMT%2B8
    username: postgres
    password: 123456

# mybatis配置
mybatis:
    # 搜索指定包别名
    typeAliasesPackage: com.ruoyi.gen.domain
    # 配置mapper的扫描，找到所有的mapper.xml映射文件
    mapperLocations: classpath:mapper/**/*.xml

# swagger配置
swagger:
  title: 代码生成接口文档
  license: Powered By ruoyi
  licenseUrl: https://ruoyi.vip

# 代码生成
gen:
  # 作者
  author: ruoyi
  # 默认生成包路径 system 需改成自己的模块名称 如 system monitor tool
  packageName: com.ruoyi.system
  # 自动去除表前缀，默认是false
  autoRemovePre: false
  # 表前缀（生成类名不会包含表前缀，多个用逗号分隔）
  tablePrefix: sys_
', '9f25e70735722cba18ed13252a844226', '2020-11-20 00:00:00', '2023-07-07 12:35:33.763', 'nacos', '192.168.159.1', '', '', '代码生成', 'null', 'null', 'yaml', '', '');
INSERT INTO "public"."config_info" VALUES (2, 'ruoyi-gateway-dev.yml', 'DEFAULT_GROUP', 'spring:
  redis:
    host: 127.0.0.1
    port: 16379
    database: 6
    password: 123456
  cloud:
    gateway:
      discovery:
        locator:
          lowerCaseServiceId: true
          enabled: true
      routes:
        # 认证中心
        - id: ruoyi-auth
          uri: lb://ruoyi-auth
          predicates:
            - Path=/auth/**
          filters:
            # 验证码处理
            - CacheRequestFilter
            - ValidateCodeFilter
            - StripPrefix=1
        # 代码生成
        - id: ruoyi-gen
          uri: lb://ruoyi-gen
          predicates:
            - Path=/code/**
          filters:
            - StripPrefix=1
        # 定时任务
        - id: ruoyi-job
          uri: lb://ruoyi-job
          predicates:
            - Path=/schedule/**
          filters:
            - StripPrefix=1
        # 系统模块
        - id: ruoyi-system
          uri: lb://ruoyi-system
          predicates:
            - Path=/system/**
          filters:
            - StripPrefix=1
        # 文件服务
        - id: ruoyi-file
          uri: lb://ruoyi-file
          predicates:
            - Path=/file/**
          filters:
            - StripPrefix=1

# 安全配置
security:
  # 验证码
  captcha:
    enabled: true
    type: math
  # 防止XSS攻击
  xss:
    enabled: true
    excludeUrls:
      - /system/notice
  # 不校验白名单
  ignore:
    whites:
      - /auth/logout
      - /auth/login
      - /auth/register
      - /*/v2/api-docs
      - /csrf
', 'b664a860ff9867716baa3eb77e245f21', '2020-05-14 14:17:55', '2023-07-07 12:34:01.656', 'nacos', '192.168.159.1', '', '', '网关模块', 'null', 'null', 'yaml', '', '');
INSERT INTO "public"."config_info" VALUES (9, 'sentinel-ruoyi-gateway', 'DEFAULT_GROUP', '[
    {
        "resource": "ruoyi-auth",
        "count": 500,
        "grade": 1,
        "limitApp": "default",
        "strategy": 0,
        "controlBehavior": 0
    },
	{
        "resource": "ruoyi-system",
        "count": 1000,
        "grade": 1,
        "limitApp": "default",
        "strategy": 0,
        "controlBehavior": 0
    },
	{
        "resource": "ruoyi-gen",
        "count": 200,
        "grade": 1,
        "limitApp": "default",
        "strategy": 0,
        "controlBehavior": 0
    },
	{
        "resource": "ruoyi-job",
        "count": 300,
        "grade": 1,
        "limitApp": "default",
        "strategy": 0,
        "controlBehavior": 0
    }
]', '411936d945573749e5956f2df0b04989', '2020-11-20 00:00:00', '2023-07-07 12:31:01.346', 'nacos', '192.168.159.1', '', '', '限流策略', 'null', 'null', 'json', '', '');
INSERT INTO "public"."config_info" VALUES (5, 'ruoyi-system-dev.yml', 'DEFAULT_GROUP', '# spring配置 
spring:
  redis:
    host: 127.0.0.1
    port: 16379
    database: 6
    password: 123456
  datasource:
    druid:
      stat-view-servlet:
        enabled: true
        loginUsername: admin
        loginPassword: 123456
    dynamic:
      druid:
        initial-size: 5
        min-idle: 5
        maxActive: 20
        maxWait: 60000
        timeBetweenEvictionRunsMillis: 60000
        minEvictableIdleTimeMillis: 300000
        validationQuery: SELECT 1 
        testWhileIdle: true
        testOnBorrow: false
        testOnReturn: false
        poolPreparedStatements: true
        maxPoolPreparedStatementPerConnectionSize: 20
        filters: stat,slf4j
        connectionProperties: druid.stat.mergeSql\=true;druid.stat.slowSqlMillis\=5000
      datasource:
          # 主库数据源
          master:
            driver-class-name: org.postgresql.Driver
            url: jdbc:postgresql://127.0.0.1:15433/postgres?stringtype=unspecified&useUnicode=true&characterEncoding=utf8&zeroDateTimeBehavior=convertToNull&useSSL=true&serverTimezone=GMT%2B8
            username: postgres
            password: 123456
          # 从库数据源
          # slave:
            # username: 
            # password: 
            # url: 
            # driver-class-name: 

# mybatis配置
mybatis:
    # 搜索指定包别名
    typeAliasesPackage: com.ruoyi.system
    # 配置mapper的扫描，找到所有的mapper.xml映射文件
    mapperLocations: classpath:mapper/**/*.xml
configuration:
    map-underscore-to-camel-case: true
    cache-enabled: false
    log-impl: org.apache.ibatis.logging.stdout.StdOutImpl
logging:
    level:
      com.ruoyi.system.mapper: debug
# swagger配置
swagger:
  title: 系统模块接口文档
  license: Powered By ruoyi
  licenseUrl: https://ruoyi.vip', '86213807e390739d81a7eadfadf68cea', '2020-11-20 00:00:00', '2023-07-07 12:33:06.76', 'nacos', '192.168.159.1', '', '', '系统模块', 'null', 'null', 'yaml', '', '');

-- ----------------------------
-- Table structure for config_info_aggr
-- ----------------------------
DROP TABLE IF EXISTS "public"."config_info_aggr";
CREATE TABLE "public"."config_info_aggr" (
  "id" int8 NOT NULL DEFAULT nextval('config_info_aggr_id_seq'::regclass),
  "data_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "group_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "datum_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "content" text COLLATE "pg_catalog"."default" NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "app_name" varchar(128) COLLATE "pg_catalog"."default",
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default"
)
;
COMMENT ON COLUMN "public"."config_info_aggr"."id" IS 'id';
COMMENT ON COLUMN "public"."config_info_aggr"."data_id" IS 'data_id';
COMMENT ON COLUMN "public"."config_info_aggr"."group_id" IS 'group_id';
COMMENT ON COLUMN "public"."config_info_aggr"."datum_id" IS 'datum_id';
COMMENT ON COLUMN "public"."config_info_aggr"."content" IS '内容';
COMMENT ON COLUMN "public"."config_info_aggr"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "public"."config_info_aggr"."tenant_id" IS '租户字段';
COMMENT ON TABLE "public"."config_info_aggr" IS '增加租户字段';

-- ----------------------------
-- Records of config_info_aggr
-- ----------------------------

-- ----------------------------
-- Table structure for config_info_beta
-- ----------------------------
DROP TABLE IF EXISTS "public"."config_info_beta";
CREATE TABLE "public"."config_info_beta" (
  "id" int8 NOT NULL DEFAULT nextval('config_info_beta_id_seq'::regclass),
  "data_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "group_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "app_name" varchar(128) COLLATE "pg_catalog"."default",
  "content" text COLLATE "pg_catalog"."default" NOT NULL,
  "beta_ips" varchar(1024) COLLATE "pg_catalog"."default",
  "md5" varchar(32) COLLATE "pg_catalog"."default",
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text COLLATE "pg_catalog"."default",
  "src_ip" varchar(20) COLLATE "pg_catalog"."default",
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default",
  "encrypted_data_key" text COLLATE "pg_catalog"."default" NOT NULL
)
;
COMMENT ON COLUMN "public"."config_info_beta"."id" IS 'id';
COMMENT ON COLUMN "public"."config_info_beta"."data_id" IS 'data_id';
COMMENT ON COLUMN "public"."config_info_beta"."group_id" IS 'group_id';
COMMENT ON COLUMN "public"."config_info_beta"."app_name" IS 'app_name';
COMMENT ON COLUMN "public"."config_info_beta"."content" IS 'content';
COMMENT ON COLUMN "public"."config_info_beta"."beta_ips" IS 'betaIps';
COMMENT ON COLUMN "public"."config_info_beta"."md5" IS 'md5';
COMMENT ON COLUMN "public"."config_info_beta"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "public"."config_info_beta"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "public"."config_info_beta"."src_user" IS 'source user';
COMMENT ON COLUMN "public"."config_info_beta"."src_ip" IS 'source ip';
COMMENT ON COLUMN "public"."config_info_beta"."tenant_id" IS '租户字段';
COMMENT ON COLUMN "public"."config_info_beta"."encrypted_data_key" IS '秘钥';
COMMENT ON TABLE "public"."config_info_beta" IS 'config_info_beta';

-- ----------------------------
-- Records of config_info_beta
-- ----------------------------

-- ----------------------------
-- Table structure for config_info_tag
-- ----------------------------
DROP TABLE IF EXISTS "public"."config_info_tag";
CREATE TABLE "public"."config_info_tag" (
  "id" int8 NOT NULL DEFAULT nextval('config_info_tag_id_seq'::regclass),
  "data_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "group_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default",
  "tag_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "app_name" varchar(128) COLLATE "pg_catalog"."default",
  "content" text COLLATE "pg_catalog"."default" NOT NULL,
  "md5" varchar(32) COLLATE "pg_catalog"."default",
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text COLLATE "pg_catalog"."default",
  "src_ip" varchar(20) COLLATE "pg_catalog"."default"
)
;
COMMENT ON COLUMN "public"."config_info_tag"."id" IS 'id';
COMMENT ON COLUMN "public"."config_info_tag"."data_id" IS 'data_id';
COMMENT ON COLUMN "public"."config_info_tag"."group_id" IS 'group_id';
COMMENT ON COLUMN "public"."config_info_tag"."tenant_id" IS 'tenant_id';
COMMENT ON COLUMN "public"."config_info_tag"."tag_id" IS 'tag_id';
COMMENT ON COLUMN "public"."config_info_tag"."app_name" IS 'app_name';
COMMENT ON COLUMN "public"."config_info_tag"."content" IS 'content';
COMMENT ON COLUMN "public"."config_info_tag"."md5" IS 'md5';
COMMENT ON COLUMN "public"."config_info_tag"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "public"."config_info_tag"."gmt_modified" IS '修改时间';
COMMENT ON COLUMN "public"."config_info_tag"."src_user" IS 'source user';
COMMENT ON COLUMN "public"."config_info_tag"."src_ip" IS 'source ip';
COMMENT ON TABLE "public"."config_info_tag" IS 'config_info_tag';

-- ----------------------------
-- Records of config_info_tag
-- ----------------------------

-- ----------------------------
-- Table structure for config_tags_relation
-- ----------------------------
DROP TABLE IF EXISTS "public"."config_tags_relation";
CREATE TABLE "public"."config_tags_relation" (
  "id" int8 NOT NULL DEFAULT nextval('config_tags_relation_id_seq'::regclass),
  "tag_name" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "tag_type" varchar(64) COLLATE "pg_catalog"."default",
  "data_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "group_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default",
  "nid" int8 NOT NULL DEFAULT nextval('config_tags_relation_nid_seq'::regclass)
)
;
COMMENT ON COLUMN "public"."config_tags_relation"."id" IS 'id';
COMMENT ON COLUMN "public"."config_tags_relation"."tag_name" IS 'tag_name';
COMMENT ON COLUMN "public"."config_tags_relation"."tag_type" IS 'tag_type';
COMMENT ON COLUMN "public"."config_tags_relation"."data_id" IS 'data_id';
COMMENT ON COLUMN "public"."config_tags_relation"."group_id" IS 'group_id';
COMMENT ON COLUMN "public"."config_tags_relation"."tenant_id" IS 'tenant_id';
COMMENT ON TABLE "public"."config_tags_relation" IS 'config_tag_relation';

-- ----------------------------
-- Records of config_tags_relation
-- ----------------------------

-- ----------------------------
-- Table structure for group_capacity
-- ----------------------------
DROP TABLE IF EXISTS "public"."group_capacity";
CREATE TABLE "public"."group_capacity" (
  "id" int8 NOT NULL DEFAULT nextval('group_capacity_id_seq'::regclass),
  "group_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "quota" int4 NOT NULL,
  "usage" int4 NOT NULL,
  "max_size" int4 NOT NULL,
  "max_aggr_count" int4 NOT NULL,
  "max_aggr_size" int4 NOT NULL,
  "max_history_count" int4 NOT NULL,
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL
)
;
COMMENT ON COLUMN "public"."group_capacity"."id" IS '主键ID';
COMMENT ON COLUMN "public"."group_capacity"."group_id" IS 'Group ID，空字符表示整个集群';
COMMENT ON COLUMN "public"."group_capacity"."quota" IS '配额，0表示使用默认值';
COMMENT ON COLUMN "public"."group_capacity"."usage" IS '使用量';
COMMENT ON COLUMN "public"."group_capacity"."max_size" IS '单个配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "public"."group_capacity"."max_aggr_count" IS '聚合子配置最大个数，，0表示使用默认值';
COMMENT ON COLUMN "public"."group_capacity"."max_aggr_size" IS '单个聚合数据的子配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "public"."group_capacity"."max_history_count" IS '最大变更历史数量';
COMMENT ON COLUMN "public"."group_capacity"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "public"."group_capacity"."gmt_modified" IS '修改时间';
COMMENT ON TABLE "public"."group_capacity" IS '集群、各Group容量信息表';

-- ----------------------------
-- Records of group_capacity
-- ----------------------------

-- ----------------------------
-- Table structure for his_config_info
-- ----------------------------
DROP TABLE IF EXISTS "public"."his_config_info";
CREATE TABLE "public"."his_config_info" (
  "id" int8 NOT NULL,
  "nid" int8 NOT NULL DEFAULT nextval('his_config_info_nid_seq'::regclass),
  "data_id" varchar(255) COLLATE "pg_catalog"."default" NOT NULL,
  "group_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "app_name" varchar(128) COLLATE "pg_catalog"."default",
  "content" text COLLATE "pg_catalog"."default" NOT NULL,
  "md5" varchar(32) COLLATE "pg_catalog"."default",
  "gmt_create" timestamp(6) NOT NULL DEFAULT '2010-05-05 00:00:00'::timestamp without time zone,
  "gmt_modified" timestamp(6) NOT NULL,
  "src_user" text COLLATE "pg_catalog"."default",
  "src_ip" varchar(20) COLLATE "pg_catalog"."default",
  "op_type" char(10) COLLATE "pg_catalog"."default",
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default",
  "encrypted_data_key" text COLLATE "pg_catalog"."default" NOT NULL
)
;
COMMENT ON COLUMN "public"."his_config_info"."app_name" IS 'app_name';
COMMENT ON COLUMN "public"."his_config_info"."tenant_id" IS '租户字段';
COMMENT ON COLUMN "public"."his_config_info"."encrypted_data_key" IS '秘钥';
COMMENT ON TABLE "public"."his_config_info" IS '多租户改造';

-- ----------------------------
-- Records of his_config_info
-- ----------------------------

-- ----------------------------
-- Table structure for permissions
-- ----------------------------
DROP TABLE IF EXISTS "public"."permissions";
CREATE TABLE "public"."permissions" (
  "role" varchar(50) COLLATE "pg_catalog"."default" NOT NULL,
  "resource" varchar(512) COLLATE "pg_catalog"."default" NOT NULL,
  "action" varchar(8) COLLATE "pg_catalog"."default" NOT NULL
)
;

-- ----------------------------
-- Records of permissions
-- ----------------------------

-- ----------------------------
-- Table structure for roles
-- ----------------------------
DROP TABLE IF EXISTS "public"."roles";
CREATE TABLE "public"."roles" (
  "username" varchar(50) COLLATE "pg_catalog"."default" NOT NULL,
  "role" varchar(50) COLLATE "pg_catalog"."default" NOT NULL
)
;

-- ----------------------------
-- Records of roles
-- ----------------------------
INSERT INTO "public"."roles" VALUES ('nacos', 'ROLE_ADMIN');

-- ----------------------------
-- Table structure for tenant_capacity
-- ----------------------------
DROP TABLE IF EXISTS "public"."tenant_capacity";
CREATE TABLE "public"."tenant_capacity" (
  "id" int8 NOT NULL DEFAULT nextval('tenant_capacity_id_seq'::regclass),
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "quota" int4 NOT NULL,
  "usage" int4 NOT NULL,
  "max_size" int4 NOT NULL,
  "max_aggr_count" int4 NOT NULL,
  "max_aggr_size" int4 NOT NULL,
  "max_history_count" int4 NOT NULL,
  "gmt_create" timestamp(6) NOT NULL,
  "gmt_modified" timestamp(6) NOT NULL
)
;
COMMENT ON COLUMN "public"."tenant_capacity"."id" IS '主键ID';
COMMENT ON COLUMN "public"."tenant_capacity"."tenant_id" IS 'Tenant ID';
COMMENT ON COLUMN "public"."tenant_capacity"."quota" IS '配额，0表示使用默认值';
COMMENT ON COLUMN "public"."tenant_capacity"."usage" IS '使用量';
COMMENT ON COLUMN "public"."tenant_capacity"."max_size" IS '单个配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "public"."tenant_capacity"."max_aggr_count" IS '聚合子配置最大个数';
COMMENT ON COLUMN "public"."tenant_capacity"."max_aggr_size" IS '单个聚合数据的子配置大小上限，单位为字节，0表示使用默认值';
COMMENT ON COLUMN "public"."tenant_capacity"."max_history_count" IS '最大变更历史数量';
COMMENT ON COLUMN "public"."tenant_capacity"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "public"."tenant_capacity"."gmt_modified" IS '修改时间';
COMMENT ON TABLE "public"."tenant_capacity" IS '租户容量信息表';

-- ----------------------------
-- Records of tenant_capacity
-- ----------------------------

-- ----------------------------
-- Table structure for tenant_info
-- ----------------------------
DROP TABLE IF EXISTS "public"."tenant_info";
CREATE TABLE "public"."tenant_info" (
  "id" int8 NOT NULL DEFAULT nextval('tenant_info_id_seq'::regclass),
  "kp" varchar(128) COLLATE "pg_catalog"."default" NOT NULL,
  "tenant_id" varchar(128) COLLATE "pg_catalog"."default",
  "tenant_name" varchar(128) COLLATE "pg_catalog"."default",
  "tenant_desc" varchar(256) COLLATE "pg_catalog"."default",
  "create_source" varchar(32) COLLATE "pg_catalog"."default",
  "gmt_create" int8 NOT NULL,
  "gmt_modified" int8 NOT NULL
)
;
COMMENT ON COLUMN "public"."tenant_info"."id" IS 'id';
COMMENT ON COLUMN "public"."tenant_info"."kp" IS 'kp';
COMMENT ON COLUMN "public"."tenant_info"."tenant_id" IS 'tenant_id';
COMMENT ON COLUMN "public"."tenant_info"."tenant_name" IS 'tenant_name';
COMMENT ON COLUMN "public"."tenant_info"."tenant_desc" IS 'tenant_desc';
COMMENT ON COLUMN "public"."tenant_info"."create_source" IS 'create_source';
COMMENT ON COLUMN "public"."tenant_info"."gmt_create" IS '创建时间';
COMMENT ON COLUMN "public"."tenant_info"."gmt_modified" IS '修改时间';
COMMENT ON TABLE "public"."tenant_info" IS 'tenant_info';

-- ----------------------------
-- Records of tenant_info
-- ----------------------------

-- ----------------------------
-- Table structure for users
-- ----------------------------
DROP TABLE IF EXISTS "public"."users";
CREATE TABLE "public"."users" (
  "username" varchar(50) COLLATE "pg_catalog"."default" NOT NULL,
  "password" varchar(500) COLLATE "pg_catalog"."default" NOT NULL,
  "enabled" bool NOT NULL
)
;

-- ----------------------------
-- Records of users
-- ----------------------------
INSERT INTO "public"."users" VALUES ('nacos', '$2a$10$EuWPZHzz32dJN7jexM34MOeYirDdFAZm2kuWj7VEOJhhZkDrxfvUu', 't');

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."config_info_aggr_id_seq"
OWNED BY "public"."config_info_aggr"."id";
SELECT setval('"public"."config_info_aggr_id_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."config_info_beta_id_seq"
OWNED BY "public"."config_info_beta"."id";
SELECT setval('"public"."config_info_beta_id_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."config_info_id_seq"
OWNED BY "public"."config_info"."id";
SELECT setval('"public"."config_info_id_seq"', 8, true);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."config_info_tag_id_seq"
OWNED BY "public"."config_info_tag"."id";
SELECT setval('"public"."config_info_tag_id_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."config_tags_relation_id_seq"
OWNED BY "public"."config_tags_relation"."id";
SELECT setval('"public"."config_tags_relation_id_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."config_tags_relation_nid_seq"
OWNED BY "public"."config_tags_relation"."nid";
SELECT setval('"public"."config_tags_relation_nid_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."group_capacity_id_seq"
OWNED BY "public"."group_capacity"."id";
SELECT setval('"public"."group_capacity_id_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."his_config_info_nid_seq"
OWNED BY "public"."his_config_info"."nid";
SELECT setval('"public"."his_config_info_nid_seq"', 9, true);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."tenant_capacity_id_seq"
OWNED BY "public"."tenant_capacity"."id";
SELECT setval('"public"."tenant_capacity_id_seq"', 2, false);

-- ----------------------------
-- Alter sequences owned by
-- ----------------------------
ALTER SEQUENCE "public"."tenant_info_id_seq"
OWNED BY "public"."tenant_info"."id";
SELECT setval('"public"."tenant_info_id_seq"', 2, false);

-- ----------------------------
-- Indexes structure for table config_info
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfo_datagrouptenant" ON "public"."config_info" USING btree (
  "data_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "group_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table config_info
-- ----------------------------
ALTER TABLE "public"."config_info" ADD CONSTRAINT "config_info_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_info_aggr
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfoaggr_datagrouptenantdatum" ON "public"."config_info_aggr" USING btree (
  "data_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "group_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "datum_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table config_info_aggr
-- ----------------------------
ALTER TABLE "public"."config_info_aggr" ADD CONSTRAINT "config_info_aggr_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_info_beta
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfobeta_datagrouptenant" ON "public"."config_info_beta" USING btree (
  "data_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "group_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table config_info_beta
-- ----------------------------
ALTER TABLE "public"."config_info_beta" ADD CONSTRAINT "config_info_beta_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_info_tag
-- ----------------------------
CREATE UNIQUE INDEX "uk_configinfotag_datagrouptenanttag" ON "public"."config_info_tag" USING btree (
  "data_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "group_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tag_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table config_info_tag
-- ----------------------------
ALTER TABLE "public"."config_info_tag" ADD CONSTRAINT "config_info_tag_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table config_tags_relation
-- ----------------------------
CREATE INDEX "idx_tenant_id" ON "public"."config_tags_relation" USING btree (
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);
CREATE UNIQUE INDEX "uk_configtagrelation_configidtag" ON "public"."config_tags_relation" USING btree (
  "id" "pg_catalog"."int8_ops" ASC NULLS LAST,
  "tag_name" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tag_type" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table config_tags_relation
-- ----------------------------
ALTER TABLE "public"."config_tags_relation" ADD CONSTRAINT "config_tags_relation_pkey" PRIMARY KEY ("nid");

-- ----------------------------
-- Indexes structure for table group_capacity
-- ----------------------------
CREATE UNIQUE INDEX "uk_group_id" ON "public"."group_capacity" USING btree (
  "group_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table group_capacity
-- ----------------------------
ALTER TABLE "public"."group_capacity" ADD CONSTRAINT "group_capacity_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table his_config_info
-- ----------------------------
CREATE INDEX "idx_did" ON "public"."his_config_info" USING btree (
  "data_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);
CREATE INDEX "idx_gmt_create" ON "public"."his_config_info" USING btree (
  "gmt_create" "pg_catalog"."timestamp_ops" ASC NULLS LAST
);
CREATE INDEX "idx_gmt_modified" ON "public"."his_config_info" USING btree (
  "gmt_modified" "pg_catalog"."timestamp_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table his_config_info
-- ----------------------------
ALTER TABLE "public"."his_config_info" ADD CONSTRAINT "his_config_info_pkey" PRIMARY KEY ("nid");

-- ----------------------------
-- Indexes structure for table permissions
-- ----------------------------
CREATE UNIQUE INDEX "uk_role_permission" ON "public"."permissions" USING btree (
  "role" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "resource" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "action" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Indexes structure for table roles
-- ----------------------------
CREATE UNIQUE INDEX "uk_username_role" ON "public"."roles" USING btree (
  "username" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "role" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Indexes structure for table tenant_capacity
-- ----------------------------
CREATE UNIQUE INDEX "uk_tenant_id" ON "public"."tenant_capacity" USING btree (
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

-- ----------------------------
-- Primary Key structure for table tenant_capacity
-- ----------------------------
ALTER TABLE "public"."tenant_capacity" ADD CONSTRAINT "tenant_capacity_pkey" PRIMARY KEY ("id");

-- ----------------------------
-- Indexes structure for table tenant_info
-- ----------------------------
CREATE UNIQUE INDEX "uk_tenant_info_kptenantid" ON "public"."tenant_info" USING btree (
  "kp" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST,
  "tenant_id" COLLATE "pg_catalog"."default" "pg_catalog"."text_ops" ASC NULLS LAST
);

La creación no es fácil. Por favor ayúdenme a seguir mi cuenta oficial. Gracias.