Original Reference: https://www.cnblogs.com/lpl666/p/12247489.html
table of Contents
SecureCRT安装、使用
01-介绍
02-下载和安装
03-注册器
04- 可能遇到的问题
05-编码格式设置
06-快速链接
01- Introduction
使用SecureCRT可以方便用户在windows环境下对linux主机进行管理
Download and install the 02-
01. In the first site to download the latest version 7.3.6 SecureCRT. Software is divided into 32-bit and 64-bit program, select the corresponding system version Installation
securecrt 32位：[http://www.121down.com/soft/softview-906.html](http://www.121down.com/soft/softview-906.html)
securecrt 64位：[http://www.121down.com/soft/softview-53196.html](http://www.121down.com/soft/softview-53196.html)
02. After the download is complete, double-click the file to install, as shown below.
06. Select the "Complete". Click "Next". (Recommended friends to choosecustomizeThe installation path, i.e. select Custom)
03- registrar
After the installation is complete, the first not to run CRT ==, first registrar to putCRT root directory, The right toAdministrator wayOpen the Builder, and then the first patch, will guide you, to openTwo "exe program", Patch after generate generated password
key points: the root, the administrator, the first patch, these three points. No more than try to unload heavy equipment.
Registration open: the following figure, the first patch,
starting CRT, information and other help in selecting the input permits the menu bar
04- problems you may encounter:
solution:
The first break - solution - is to be placed in the root directory, right to the administrator opened Builder, and then the first patch, will guide you, to open two "exe program", patch after generate generated password, then open the program secureCRT , skip the first step, select the manual input registration code, and the four input information acquired sequence number of a last checksum is not filled, it can be successfully registered.
Key point: the root, the administrator, the first patch, these three points. No more than try to unload heavy equipment.
05- encoding format settings
Current host
These are valid for the current host, you can also set the global encoding format, the second global menu bar options can be set to default settings.
Global Settings
06- Quick Links:
Finally, enter the correct password, you can link to the right.
So far OK.
