NRF24L01 has been in a state of maximum retransmission
In this time when trying to learn stm8 nrf24l01 from stm32 ported to stm8, but the middle encountered a very difficult issue, nrf24l01 frequency rate address and other registers are set up, but has returned a function call to send maximum retransmission state , state register is 0x1e, the normal transmission should 0x2E, i.e. there is no response from the machine, and can communicate directly routine, described module is normal. For a long time and finally found the problem in the transmission function, the time to write 32 bytes of data when writing data to TX_FIFO nrf24l01, if less than 32 bytes will be the maximum number of retransmissions phenomenon, i.e., CE = fifo register write operation between 10 and CE =.
